Categories
Máy tính công nghiệp ADLINK
PLASTIM
KAI SUH SUH
Cable Clips
Caps
Communication Connectors
Conduits
PCB Parts
Plastic Screws
RJ45 Modular Plug And Plug Cover
Value Pack
Wiring Ducts
Bushings
Cable Clamps
Cable Gland
Cable Marker
Cable Tie
Fasteners
Terminal
Cord End Terminal
Cord End Terminal (double)
Female Lug
Male Lug
- Non Insulated Cord End
- Wire Connector/Nut
- Blade Terminal
- Flanged Spade Terminal
- Fully Receptacle
- Hook Terminal
- Insulated Bullet
- Insulated Ring Terminal
- Insulated Ring Terminal Easy Entry
- Insulated Y Terminal
- Insulated Y Terminal Easy Entry
- Pin Terminals
- Ring Terminal
- Y Terminal
Tubes
Wire Connectors
Wrapping Bands
PHOENIX CONTACT
AUTOMATE
CONNECT
Cables and lines for signals, data, and power
Connectors for device connection and field cabling
Distribution blocks for load and control current distribution
Distributors, adapters, and conductor connectors for reliable signal, data, and power cabling
Electronics housings for the DIN rail and for field applications
Accessories and HMI components for electronics housings
Customer-specific electronics housings
Development kits for electronics housings
DIN rail housings for control cabinet applications
BC modular electronics housings for building automation
EH basic electronics housings for universal applications
Electronics housings for Raspberry Pi applications
ICS modular electronics housings for IoT applications
ME MAX modular electronics housings in a flexible modular design
ME modular electronics housings in an easy-to-install cup shape
ME-IO multifunctional electronics housings with modular front connection technology
ME-PLC multifunctional housings for controllers
UM-ALU extruded profile housings for high EMC
UM-BASIC extruded profile housings for custom PCB sizes
UM-PRO extruded profile housings for high temperature resistance
Field housings for outdoor use
FINEPITCH board-to-board connectors for the connection of PCBs within the device
PCB terminal blocks and PCB connectors
Plug-in test systems for protection technology and control engineering
System cabling for controllers
Terminal Blocks
Disconnect and knife-disconnect terminal blocks
- End Cover
Feed-through terminal blocks, multi-conductor terminal blocks, and multi-level terminal blocks
Fuse terminal blocks, component terminal blocks, and diode terminal blocks
High-current terminal blocks
Hybrid terminal blocks
Installation terminal blocks
Marshaling panels
Marshalling patchboards
Micro and miniature terminal blocks
Plug-in terminal blocks
Sensor terminal blocks and actuator terminal block
UT Screw
- UK Universal
- TB Screw
PT Push-in Terminal block
ST Spring-cage Terminal block
QT Fast
RT Bolt
- SK Shield
MARK, ASSEMBLE, AND INSTALL
Automatic tools
Control cabinet accessories
Crimp connectors
Ferrules
Hand tools for industry and manual work
Industrial lighting and signal technology
Junction boxes and empty enclosures
Marking material for industrial identification
Printers
Software for control cabinet building
Worker assistance systems
SUPPLY, CHARGE, AND PROTECT
CHARX – Charging technology for e-mobility
DC/DC converters and DC/AC inverters
Device circuit breakers
EMC filters for a reliable power supply
Power distributors: The system with integrated busbar for your control cabinet
Protective relays for mains protection
Redundancy modules
Surge protection and lightning protection
Uninterruptible power supplies (UPS)
Power Supply
SWITCH, MEASURE AND MONITOR
TERMINAL BLOCK
Accessories
- SCHNEIDER
Phoenix Contact
Y distributor – SAC-3P-M 8Y/2XM 8FS VP – 1696222
*Description: Y distributor, 3-position, unshielded, Plug straight M8, A-coded, on Socket straight M8, A-coded and Socket straight M8, A-coded, Parallel distributor
*Country of origin: PL (Poland)
Ambient conditions
Ambient temperature (operation) | -25 °C … 90 °C (Plug / socket) |
---|---|
Degree of protection | IP65 |
IP67 |
General
Rated current at 40°C | 4 A |
---|---|
Rated voltage | 48 V AC |
60 V DC | |
Number of positions | 3 |
Insulation resistance | ≥ 10 GΩ |
Coding | A – standard |
Standards/regulations | M8 connector IEC 61076-2-104 |
Status display | No |
Overvoltage category | II |
Degree of pollution | 3 |
Insertion/withdrawal cycles | ≥ 100 |
Torque | 0.2 Nm (M8 connectors) |
Material
Flammability rating according to UL 94 | HB |
---|---|
Contact material | CuZn |
Contact surface material | Ni/Au |
Contact carrier material | TPU GF |
Material of grip body | TPU, hardly inflammable, self-extinguishing |
Material, knurls | Zinc die-cast, nickel-plated |
Sealing material | NBR |
Standards and Regulations
Standard designation | M8 connector |
---|---|
Standards/regulations | IEC 61076-2-104 |
Flammability rating according to UL 94 | HB |
Sản phẩm tương tự
-
PHOENIX CONTACT
Industrial Ethernet Switch – FL SWITCH SFN 5TX – 2891152
₫236.00Thêm vào giỏ hàng*Description: Ethernet switch, 5 TP RJ45 ports, automatic detection of data transmission speed of 10 or 100 Mbps (RJ45), autocrossing function
*Country of origin: TW (Taiwan)
Your advantages
-Local diagnostic indicators with LEDs
-The switch also offers cable locking and port blocking
-RJ45 ports support a transmission speed of 10/100 Mbps; fiber optic ports support 100 Mbps
-QoS-prioritized (Quality of Service) messages
-
PHOENIX CONTACT
Installation terminal block – UIK 35 – 3006182
Đọc tiếp*Description: Installation terminal block, Screw connection, cross section: 0.75 mm² – 35 mm², AWG: 18 – 2, width: 15.2 mm, color: gray, mounting type: NS 35/7,5, NS 35/15, NS 32
*Country of origin: CN (China)
Your advantages
Your advantages
-Installation terminal blocks with a particularly low-profile design for use in flat distributors
-The asymmetrical arrangement of the terminal blocks on the DIN rail enables the neutral busbar to be routed past the terminal blocks
Giỏ hàng
Liên hệ:
Phoenix Contact
ADLINK – Máy tính Công nghiệp
KSS (đầu Cos, phụ kiện KSS)
Đánh giá
Chưa có đánh giá nào.