Categories
Máy tính công nghiệp ADLINK
- PLASTIM
- Uncategorized
KAI SUH SUH
- RJ45 Modular Plug And Plug Cover
- Bushings
- Cable Clamps
- Cable Marker
- Cable Tie
- Fasteners
- Terminal
- Cord End Terminal
- Cord End Terminal (double)
- Male Lug
- Non Insulated Cord End
- Blade Terminal
- Flanged Spade Terminal
- Fully Receptacle
- Hook Terminal
- Insulated Bullet
- Insulated Ring Terminal
- Insulated Ring Terminal Easy Entry
- Insulated Y Terminal
- Insulated Y Terminal Easy Entry
- Pin Terminals
- Ring Terminal
- Y Terminal
- Tubes
- Wire Connectors
- Wrapping Bands
PHOENIX CONTACT
- SCHNEIDER
Phoenix Contact
Type 1+2 protective device combination – FLT-SEC-T1+T2-3S-350/25-FM – 2905470
*Description: Plug-in lightning and surge arrester combination, in accordance with Type 1+2/Class I+II, for 3-phase power supply networks, with separate N and PE (L1, L2, L3, PE, N).
*Country of origin: DE (Germany)
Your advantages
-Directly coordinated combination of type 1 spark gap without line follow current and type 2 varistor arrester
-Particularly suitable for maximum protection of sensitive devices in harsh environments
-High continuous voltage of 350 V AC for 230/400 V AC networks with high voltage fluctuations
-Pluggable
-Low voltage protection level of 1.5 kV
-Optical, mechanical status indicator
-With floating remote indication contact
-Plugs can be checked with CHECKMASTER 2
FLT-SEC-T1+T2-3S-350/25-FM – 2905470 là chống sét cấp 1 + cấp 2, dùng cho nguồn 3 pha, 5 dây (L1, L2, L3, PE, N), dùng trước CB nguồn điện vào nhà máy, tòa nhà.
Sơ đồ đấu dây:
Kích thước:
Height | : 95.2 mm |
---|---|
Width | : 142.4 mm |
Depth | : 74.5 mm (incl. DIN rail 7.5 mm) |
Horizontal pitch | : 8 Div. |
Điều kiện môi trường
Degree of protection | : IP20 (only when all terminal points are used) |
---|---|
Ambient temperature (operation) | : -40 °C … 80 °C |
Ambient temperature (storage/transport) | : -40 °C … 80 °C |
Altitude | : ≤ 2000 m (amsl (above mean sea level)) |
Permissible humidity (operation) | : 5 % … 95 % |
Shock (operation) | : 30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) |
Vibration (operation) | : 5g (5 – 500 Hz/2.5 h/X, Y, Z) |
Thông số chung
IEC test classification | :+ I + II |
---|---|
+ I | |
+ T1 + T2 | |
+ T1 | |
EN type | :+ T1 + T2 |
+ T1 | |
IEC power supply system | :+ TN-S |
+ TT | |
Mode of protection | :+ L-N |
+ L-PE | |
+ N-PE | |
Mounting type | : DIN rail: 35 mm |
Color | :+ light grey RAL 7035 |
+ traffic grey A RAL 7042 | |
Housing material | :+ PA 6.6-FR 20% GF |
+ PBT-FR | |
Degree of pollution | : 2 |
Flammability rating according to UL 94 | : V-0 |
Type | : DIN rail module, two-section, divisible |
Number of positions | : 4 |
Surge protection fault message | : Optical, remote indicator contact |
Additional technical data
Maximum discharge current Imax (8/20) µs | : 100 kA |
---|
Indicator/remote signaling
Switching function | : PDT contact |
---|---|
Operating voltage | :+ 12 V AC … 250 V AC |
+ 125 V DC (200 mA DC) | |
Operating current | :+ 10 mA AC … 1 A AC |
+ 1 A DC (30 V DC) | |
Connection method | : Plug-in/screw connection via COMBICON |
Screw thread | : M2 |
Tightening torque | : 0.25 Nm |
Stripping length | : 7 mm |
Conductor cross section flexible | : 0.14 mm² … 1.5 mm² |
Conductor cross section solid | : 0.14 mm² … 1.5 mm² |
Conductor cross section AWG | : 28 … 16 |
Dữ liệu kết nối
Connection method | : Screw connection |
---|---|
Screw thread | : M5 |
Tightening torque | : 4.5 Nm |
Stripping length | : 18 mm |
Conductor cross section flexible | : 2.5 mm² … 35 mm² |
Conductor cross section solid | : 2.5 mm² … 35 mm² |
Conductor cross section AWG | : 13 … 2 |
Connection method | : Fork-type cable lug |
Conductor cross section flexible | : 1.5 mm² … 16 mm² |
Thông số kỹ thuật
SPD Type | : 2CA |
---|---|
Maximum continuous operating voltage MCOV (L-L) | : 528 V AC |
Maximum continuous operating voltage MCOV (L-N) | :264 V AC |
Maximum continuous operating voltage MCOV (L-G) | : 264 V AC |
Maximum continuous operating voltage MCOV (N-G) | : 350 V AC |
Nom. voltage | : 240/415 V AC |
Rated load current IL | : 50 A |
Mode of protection | :+ L-L |
+ L-N | |
+ L-G | |
+ N-G | |
Power distribution system | : Wye |
Nominal frequency | : 50/60 Hz |
Voltage protection rating VPR (L-L) | : 2000 V |
Voltage protection rating VPR (L-N) | : 1200 V |
Voltage protection rating VPR (L-G) | : 1500 V |
Voltage protection rating VPR (N-G) | : 1200 V |
Nominal discharge current In | : 20 kA |
Short-circuit current rating (SCCR) | : 50 kA |
UL indicator/remote signaling
Operating voltage | : 125 V AC |
---|---|
Operating current | : 1 A AC |
Tightening torque | : 4 lbf-in. |
Conductor cross section AWG | : 30 … 14 |
Dữ liệu kết nối UL
Conductor cross section AWG | : 3 … 2 |
---|---|
Tightening torque | : 40 lbf-in. |
Tiêu chuẩn và quy định
Standards/regulations | : IEC 61643-11 2011 |
---|---|
: EN 61643-11 2012 |
Tuân thủ sản phẩm môi trường
REACh SVHC | : Lead 7439-92-1 |
---|---|
China RoHS | : Environmentally Friendly Use Period = 50 years |
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer’s declaration” |
Classifications
eCl@ss
eCl@ss 4.0 | : 27140200 |
---|---|
eCl@ss 4.1 | : 27140200 |
eCl@ss 5.0 | : 27140200 |
eCl@ss 5.1 | : 27140200 |
eCl@ss 6.0 | : 27130800 |
eCl@ss 7.0 | : 27130808 |
eCl@ss 8.0 | : 27130808 |
eCl@ss 9.0 | : 27130808 |
ETIM
ETIM 5.0 | : EC001457 |
---|---|
ETIM 6.0 | : EC001457 |
ETIM 7.0 | : EC001457 |
UNSPSC
UNSPSC 13.2 | : 39121620 |
---|---|
UNSPSC 18.0 | : 39121620 |
UNSPSC 19.0 | : 39121620 |
UNSPSC 20.0 | : 39121620 |
UNSPSC 21.0 | : 39121620 |
Sản phẩm tương tự
-
PHOENIX CONTACT
Surge protection device – DT-TELE-RJ45 – 2882925
Đọc tiếp*Description: Attachment plug with surge protection for analog and digital telecommunications interfaces (VDSL up to 50 Mbps). Connection: RJ45 (RJ12/RJ11) and screw terminal block (COMBICON). Alternatively, can be snapped onto a DIN rail.
*Country of origin: DE (Germany)
Your advantages
-For analog and digital (DSL) telecommunications interface
-Connection: RJ45 socket and/or plug-in screw terminal blocks
-The adapter included enables conversion from RJ45 to RJ11 and RJ12
-DIN rail mounting possible by removing the cover cap
-International use thanks to multiple assignment
-
PHOENIX CONTACT
Type 3 surge protection device – PLT-SEC-T3-3S-230-FM – 2905230
Đọc tiếp*Description: Plug-in device protection, according to type 3/class III, for 3-phase power supply networks with separate N and PE (5-conductor system: L1, L2, L3, N, PE), with integrated surge-proof fuse and remote indication contact.
*Country of origin: DE (Germany)
Your advantages
-Varistor-based device protection
-Can be used without separate backup fuse thanks to integrated overcurrent protection
-For multi-phase power supply units
-Pluggable
-Optical status indicator via LED
-With floating remote indication contact
-Plugs can be checked with CHECKMASTER 2
-
PHOENIX CONTACT
Chống sét thiết bị – Surge protection device – DT-LAN-CAT.6+ – 2881007
Đọc tiếp*Description: Surge protection in accordance with Class EA (CAT6A), for Gigabit Ethernet (up to 10 Gbps), token ring, FDDI/CDDI, ISDN, and DS1. Suitable for Power over Ethernet (PoE+) “Mode A” and “Mode B”. RJ45 attachment plug with separate grounding cable and ground connection snap-on foot for NS 35 DIN rails.
*Country of origin: DE (Germany)
Your advantages
-Reliable transmission speeds up to 10 Gbps
-Protective adapter for eight signal paths via RJ45 connector
-Suitable for category 6 high-speed data networks
-Can be installed in a control cabinet by removing the ground connection adapter

Giỏ hàng
Liên hệ:
Phoenix Contact
Mr Khánh – 0326 32 33 22
Mr Kha – 0879 296 759
Mr Trường – 0902 853 421
Mr Vương – 0916 827 412
ADLINK – Máy tính Công nghiệp
Mr Nguyên – 0964 044 518
Sale ADMIN
Ms Ngân – 0785 503 824