Categories
Máy tính công nghiệp ADLINK
- PLASTIM
- Uncategorized
KAI SUH SUH
- RJ45 Modular Plug And Plug Cover
- Bushings
- Cable Clamps
- Cable Marker
- Cable Tie
- Fasteners
- Terminal
- Cord End Terminal
- Cord End Terminal (double)
- Male Lug
- Non Insulated Cord End
- Blade Terminal
- Flanged Spade Terminal
- Fully Receptacle
- Hook Terminal
- Insulated Bullet
- Insulated Ring Terminal
- Insulated Ring Terminal Easy Entry
- Insulated Y Terminal
- Insulated Y Terminal Easy Entry
- Pin Terminals
- Ring Terminal
- Y Terminal
- Tubes
- Wire Connectors
- Wrapping Bands
PHOENIX CONTACT
- SCHNEIDER
AdvancedTCA
AdvancedTCA Platform
CompactPCI, PC/104, VPX SBCs
CompactPCI/PlusIO/Serial
Computer-On-Modules
GPU & Edge AI
Industrial Motherboards & SBCs
ATX Motherboards
Industrial PCs, Fanless Embedded PCs
Expandable Fanless Embedded PCs
Medically Certified Products
Motion, Machine Vision, Fieldbus
Motion Control
Panel PCs & HMIs
Rugged SFF Platforms & Servers
Accessories
PCB connectors
Tool
SFNB Switch
Essential Series
Quint Power supply
Trio Power supply
Uno Power supply
Relay
Signal conditioners
Surge Arrester
Terminal Blocks
Type 1+2 protective device combination – FLT-SEC-T1+T2-1S-350/25-FM – 2905466
Your advantages
- Directly coordinated combination of type 1 spark gap without line follow current and type 2 varistor arrester
- Particularly suitable for maximum protection of sensitive devices in harsh environments
- High continuous voltage of 350 V AC for 230/400 V AC networks with high voltage fluctuations
- Pluggable
- Low voltage protection level of 1.5 kV
- Optical, mechanical status indicator
- With floating remote indication contact
- Plugs can be checked with CHECKMASTER 2
Bộ chống sét cấp 1+2 có Imax= 100KA, dùng cho nguồn 1 pha, 2 dây ( L, PE, N), dùng trước CB nguồn điện vào nhà máy, tòa nhà, được sử dụng rộng rãi trong các công trình dự án có yêu cầu cao vê chất lượng.
Tài liệu hướng dẫn lắp đặt : Tai-lieu-huong-dan-lap-dat
Điểm nổi bật:
- Directly coordinated combination of type 1 spark gap without line follow current and type 2 varistor arrester
- Particularly suitable for maximum protection of sensitive devices in harsh environments
- High continuous voltage of 350 V AC for 230/400 V AC networks with high voltage fluctuations
- Pluggable
- Low voltage protection level of 1.5 kV
- Optical, mechanical status indicator
- With floating remote indication contact
- Plugs can be checked with CHECKMASTER 2
Kích thước
| Height | : 95.2 mm |
|---|---|
| Width | : 71.2 mm |
| Depth | : 74.5 mm (incl. DIN rail 7.5 mm) |
| Horizontal pitch | : 4 Div. |
Điều kiện môi trường hoạt động
| Degree of protection | : IP20 (only when all terminal points are used) |
|---|---|
| Ambient temperature (operation) | : -40 °C … 80 °C |
| Ambient temperature (storage/transport) | : -40 °C … 80 °C |
| Altitude | : ≤ 2000 m (amsl (above mean sea level)) |
| Permissible humidity (operation) | : 5 % … 95 % |
| Shock (operation) | : 30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) |
| Vibration (operation) | : 5g (5 – 500 Hz/2.5 h/X, Y, Z) |
Thông số chung
| IEC test classification | :+ I + II |
|---|---|
| + I | |
| + T1 + T2 | |
| + T1 | |
| EN type | :+ T1 + T2 |
| + T1 | |
| IEC power supply system | :+ TN-S |
| + TT | |
| Mode of protection | :+ L-N |
| + L-PE | |
| + N-PE | |
| Mounting type | : DIN rail: 35 mm |
| Color | :+ light grey RAL 7035 |
| + traffic grey A RAL 7042 | |
| Housing material | :+ PA 6.6-FR 20 % GF |
| + PBT-FR | |
| Degree of pollution | : 2 |
| Flammability rating according to UL 94 | : V-0 |
| Type | : DIN rail module, two-section, divisible |
| Number of positions | : 2 |
| Surge protection fault message | : Optical, remote indicator contact |
Thông số bảo vệ mạch
| Nominal voltage UN | :+ 240 V AC (TN-S) |
|---|---|
| + 240 V AC (TT) | |
| Nominal frequency fN | : 50 Hz (60 Hz) |
| Maximum continuous voltage UC | : 350 V AC |
| Rated load current IL | : 125 A (< 55 °C) |
| Residual current IPE | : ≤ 0.01 mA |
| Nominal discharge current In (8/20) µs (L-N) | : 25 kA |
| Nominal discharge current In (8/20) µs (L-PE) | : 25 kA |
| Nominal discharge current In (8/20) µs (N-PE) | : 100 kA |
| Impulse discharge current (10/350) µs (L-N), charge | : 12.5 As |
| Impulse discharge current (10/350) µs (L-N), specific energy | : 160 kJ/Ω |
| Impulse discharge current (10/350) µs (L-N), peak current value Iimp | : 25 kA |
| Impulse discharge current (10/350) µs (L-PE), charge | : 12.5 As |
| Impulse discharge current (10/350) µs (L-PE), specific energy | : 160 kJ/Ω |
| Impulse discharge current (10/350) µs (L-PE), peak current value Iimp | : 25 kA |
| Impulse discharge current (10/350) µs (N-PE), charge | : 50 As |
| Impulse discharge current (10/350) µs (N-PE), specific energy | : 2500 kJ/Ω |
| Impulse discharge current (10/350) µs (N-PE), peak current value Iimp | : 100 kA |
| Follow current interrupt rating Ifi (L-N) | :+ 25 kA (264 V AC) |
| + 3 kA (350 V AC) | |
| Follow current interrupt rating Ifi (N-PE) | : 100 A (350 V AC) |
| Short-circuit current rating ISCCR | :+ 25 kA (264 V AC) |
| + 3 kA (350 V AC) | |
| Voltage protection level Up (L-N) | : ≤ 1.5 kV |
| Voltage protection level Up (L-PE) | : ≤ 2.2 kV |
| Voltage protection level Up (N-PE) | : ≤ 1.5 kV |
| Residual voltage Ures (L-N) | :+ ≤ 1.5 kV (at In) |
| + ≤ 1.2 kV (at 10 kA) | |
| + ≤ 1 kV (at 5 kA) | |
| + ≤ 0.9 kV (at 3 kA) | |
| Residual voltage Ures (L-PE) | :+ ≤ 2.2 kV (at In) |
| + ≤ 2 kV (at 10 kA) | |
| + ≤ 1.8 kV (at 5 kA) | |
| + ≤ 1.6 kV (at 3 kA) | |
| Residual voltage Ures (N-PE) | :+ ≤ 1.5 kV (at In) |
| + ≤ 1 kV (at 10 kA) | |
| + ≤ 0.9 kV (at 5 kA) | |
| + ≤ 0.8 kV (at 3 kA) | |
| TOV behavior at UT (L-N) | :+ 415 V AC (5 s / withstand mode) |
| + 457 V AC (120 min / safe failure mode) | |
| TOV behavior at UT (N-PE) | : 1200 V AC (200 ms / withstand mode) |
| Response time tA (L-N) | : ≤ 25 ns |
| Response time tA (L-PE) | : ≤ 100 ns |
| Response time tA (N-PE) | : ≤ 100 ns |
| Max. backup fuse with V-type through wiring | : 125 A (gG) |
| Max. backup fuse with branch wiring | : 315 A (gG) |
Thông số dữ liệu kỹ thuật sung
| Maximum discharge current Imax (8/20) µs | : 100 kA |
|---|
Thông số hiển thị/điều khiển truyền tín hiệu
| Switching function | : PDT contact |
|---|---|
| Operating voltage | :+ 12 V AC … 250 V AC |
| + 125 V DC (200 mA DC) | |
| Operating current | :+ 10 mA AC … 1 A AC |
| + 1 A DC (30 V DC) | |
| Connection method | : Plug-in/screw connection via COMBICON |
| Screw thread | : M2 |
| Tightening torque | : 0.25 Nm |
| Stripping length | : 7 mm |
| Conductor cross section flexible | : 0.14 mm² … 1.5 mm² |
| Conductor cross section solid | : 0.14 mm² … 1.5 mm² |
| Conductor cross section AWG | : 28 … 16 |
Thống số kết nối dữ liệu
| Connection method | : Screw connection |
|---|---|
| Screw thread | : M5 |
| Tightening torque | : 4.5 Nm |
| Stripping length | : 18 mm |
| Conductor cross section flexible | : 2.5 mm² … 35 mm² |
| Conductor cross section solid | : 2.5 mm² … 35 mm² |
| Conductor cross section AWG | : 13 … 2 |
| Connection method | : Fork-type cable lug |
| Conductor cross section flexible | : 1.5 mm² … 16 mm² |
Tiêu chuẩn UL về thông sốkỹ thuật
| SPD Type | : 2CA |
|---|---|
| Maximum continuous operating voltage MCOV (L-N) | : 264 V AC |
| Maximum continuous operating voltage MCOV (L-G) | : 264 V AC |
| Maximum continuous operating voltage MCOV (N-G) | : 350 V AC |
| Nom. voltage | : 240 V AC |
| Rated load current IL | : 50 A |
| Mode of protection | :+ L-N |
| + L-G | |
| + N-G | |
| Power distribution system | : Single phase |
| Nominal frequency | : 50/60 Hz |
| Voltage protection rating VPR (L-N) | : 1200 V |
| Voltage protection rating VPR (L-G) | : 1500 V |
| Voltage protection rating VPR (N-G) | : 1200 V |
| Nominal discharge current In | : 20 kA |
| Short-circuit current rating (SCCR) | : 50 kA |
Tiêu chuẩn UL về hiển thị/điều khiển truyền tín hiệu
| Operating voltage | : 125 V AC |
|---|---|
| Operating current | : 1 A AC |
| Tightening torque | : 4 lbf-in. |
| Conductor cross section AWG | : 30 … 14 |
Tiêu chuẩn UL về kết nối dữ liệu
| Conductor cross section AWG | : 3 … 2 |
|---|---|
| Tightening torque | : 40 lbf-in. |
Tiêu chuẩn và quy định
| Standards/regulations | : IEC 61643-11 2011 |
|---|---|
| : EN 61643-11 2012 |
Tiểu chuẩn về môi trường
| REACh SVHC | : Lead 7439-92-1 |
|---|---|
| China RoHS | : Environmentally Friendly Use Period = 50 years |
| For details about hazardous substances go to tab “Downloads”, Category “Manufacturer’s declaration” |
Classifications
eCl@ss
| eCl@ss 4.0 | 27140200 |
|---|---|
| eCl@ss 4.1 | 27140200 |
| eCl@ss 5.0 | 27140200 |
| eCl@ss 5.1 | 27140200 |
| eCl@ss 6.0 | 27130800 |
| eCl@ss 7.0 | 27130808 |
| eCl@ss 8.0 | 27130808 |
| eCl@ss 9.0 | 27130808 |
UNSPSC
| UNSPSC 13.2 | 39121620 |
|---|---|
| UNSPSC 18.0 | 39121620 |
| UNSPSC 19.0 | 39121620 |
| UNSPSC 20.0 | 39121620 |
| UNSPSC 21.0 | 39121620 |
Sản phẩm tương tự
-
PHOENIX CONTACT
Chống sét Profibus dạng giắc cắm – Surge protection device – D-UFB-PB – 2880642
Đọc tiếp*Description: Fine surge protection in a 9-pos. D-SUB plug for PROFIBUS-DP applications with a transmission speed of up to 12 Mbps.
*Country of origin: DE (Germany)
Your advantages
-Integrated termination resistor
-Data transmission speed up to 12 Mbps
-Direct use at the interface
-
PHOENIX CONTACT
Type 3 surge protection device – PT 2-PE/S-24AC/FM – 2800457
Đọc tiếpYour advantages
- Plugs can be checked with CHECKMASTER
- Tool-free plug replacement
- With floating remote indication contact
- Optical signaling of disconnection via LED
- Consists of base element and plug
- DIN rail module
- For single and multi-phase power supply units
Đặt mua Type 1+2 protective device combination - FLT-SEC-T1+T2-1S-350/25-FM - 2905466
Type 1+2 protective device combination - FLT-SEC-T1+T2-1S-350/25-FM - 2905466
Liên hệ:
Phoenix Contact
Mr Khánh – 0326 32 33 22
Mr Kha – 0879 296 759
Mr Trường – 0902 853 421
Mr Vương – 0916 827 412
ADLINK – Máy tính Công nghiệp
Mr Nguyên – 0964 044 518
Sale ADMIN
Ms Ngân – 0785 503 824
Đánh giá
Chưa có đánh giá nào.