Categories
Máy tính công nghiệp ADLINK
PLASTIM
KAI SUH SUH
- RJ45 Modular Plug And Plug Cover
- Bushings
- Cable Clamps
- Cable Marker
- Cable Tie
- Fasteners
- Terminal
- Cord End Terminal
- Cord End Terminal (double)
- Male Lug
- Non Insulated Cord End
- Blade Terminal
- Flanged Spade Terminal
- Fully Receptacle
- Hook Terminal
- Insulated Bullet
- Insulated Ring Terminal
- Insulated Ring Terminal Easy Entry
- Insulated Y Terminal
- Insulated Y Terminal Easy Entry
- Pin Terminals
- Ring Terminal
- Y Terminal
- Tubes
- Wire Connectors
- Wrapping Bands
PHOENIX CONTACT
- SCHNEIDER
AdvancedTCA
AdvancedTCA Platform
CompactPCI, PC/104, VPX SBCs
CompactPCI/PlusIO/Serial
Computer-On-Modules
GPU & Edge AI
Industrial Motherboards & SBCs
ATX Motherboards
Industrial PCs, Fanless Embedded PCs
Expandable Fanless Embedded PCs
Medically Certified Products
Motion, Machine Vision, Fieldbus
Motion Control
Panel PCs & HMIs
Rugged SFF Platforms & Servers
TERMINAL BLOCK
Accessories
PCB connectors
Tool
Ethernet Switch
SFNB Switch
MCR Technology- MINI MCR
Power Supply
STEP Power supply- Kích thước nhỏ gọn và hiệu quả
Essential Series
Quint Power supply
Trio Power supply
Uno Power supply
Relay
Signal conditioners
Surge Arrester
Terminal Blocks
UT Screw
PT Push-in Terminal block
ST Spring-cage Terminal block
Chống sét thiết bị – Surge protection device – DT-LAN-CAT.6+ – 2881007
*Description: Surge protection in accordance with Class EA (CAT6A), for Gigabit Ethernet (up to 10 Gbps), token ring, FDDI/CDDI, ISDN, and DS1. Suitable for Power over Ethernet (PoE+) “Mode A” and “Mode B”. RJ45 attachment plug with separate grounding cable and ground connection snap-on foot for NS 35 DIN rails.
*Country of origin: DE (Germany)
Your advantages
-Reliable transmission speeds up to 10 Gbps
-Protective adapter for eight signal paths via RJ45 connector
-Suitable for category 6 high-speed data networks
-Can be installed in a control cabinet by removing the ground connection adapter
DT-LAN-CAT.6+ – 2881007 là sản phấm chống sét mạng Lan hỗ trợ tốc độ tối đa tới 10Gb . DT-LAN-CAT.6+ – 2881007 dạng giắc cắm có hỗ trợ POE cho phép giải pháp lắp đặt đơn giản nhanh chóng . Khác với thiết bị chống sét mạng hạt nổ thông thường trên thị trường DT-LAN-CAT.6+ – 2881007 được làm từ thành phần chống sét cao cấp nhất của Phoenix Contact Đức cho phép bảo vệ hệ thống mạng Lan trong các công trình một cách an toàn hiệu quả.
Sơ đồ dây
Kích thước
| Height | : 102 mm |
|---|---|
| Width | : 25 mm |
| Depth | : 63.5 mm |
Điều kiện môi trường
| Ambient temperature (operation) | : -40 °C … 70 °C |
|---|---|
| Ambient temperature (storage/transport) | : -40 °C … 70 °C |
| Degree of protection | : IP20 |
Thông số chung
| Housing material | : Zinc die-cast |
|---|---|
| Color | : silver/black |
| Mounting type | : Connection-specific attachment plug and DIN rail, 35 mm |
| Type | : Attachment plug for DIN rail mounting |
| Number of positions | : 8 |
| Direction of action | : Line-Line & Line-Ground/Shield |
Dữ liệu kết nối
| Connection method | : RJ45 |
|---|
Connection, equipotential bonding
| Connection method | : DIN rail NS35 |
|---|
Sản phẩm tương tự
-
PHOENIX CONTACT
Surge protection device – DT-TELE-RJ45 – 2882925
Đọc tiếp*Description: Attachment plug with surge protection for analog and digital telecommunications interfaces (VDSL up to 50 Mbps). Connection: RJ45 (RJ12/RJ11) and screw terminal block (COMBICON). Alternatively, can be snapped onto a DIN rail.
*Country of origin: DE (Germany)
Your advantages
-For analog and digital (DSL) telecommunications interface
-Connection: RJ45 socket and/or plug-in screw terminal blocks
-The adapter included enables conversion from RJ45 to RJ11 and RJ12
-DIN rail mounting possible by removing the cover cap
-International use thanks to multiple assignment
-
PHOENIX CONTACT
Type 1+2 protective device combination – FLT-SEC-T1+T2-3S-350/25-FM – 2905470
Đọc tiếp*Description: Plug-in lightning and surge arrester combination, in accordance with Type 1+2/Class I+II, for 3-phase power supply networks, with separate N and PE (L1, L2, L3, PE, N).
*Country of origin: DE (Germany)
Your advantages
-Directly coordinated combination of type 1 spark gap without line follow current and type 2 varistor arrester
-Particularly suitable for maximum protection of sensitive devices in harsh environments
-High continuous voltage of 350 V AC for 230/400 V AC networks with high voltage fluctuations
-Pluggable
-Low voltage protection level of 1.5 kV
-Optical, mechanical status indicator
-With floating remote indication contact
-Plugs can be checked with CHECKMASTER 2
-
PHOENIX CONTACT
Type 3 surge protection device – PLT-SEC-T3-3S-230-FM – 2905230
Đọc tiếp*Description: Plug-in device protection, according to type 3/class III, for 3-phase power supply networks with separate N and PE (5-conductor system: L1, L2, L3, N, PE), with integrated surge-proof fuse and remote indication contact.
*Country of origin: DE (Germany)
Your advantages
-Varistor-based device protection
-Can be used without separate backup fuse thanks to integrated overcurrent protection
-For multi-phase power supply units
-Pluggable
-Optical status indicator via LED
-With floating remote indication contact
-Plugs can be checked with CHECKMASTER 2
Liên hệ:
Phoenix Contact
ADLINK – Máy tính Công nghiệp
KSS (đầu Cos, phụ kiện KSS)
