Categories
Máy tính công nghiệp ADLINK
PLASTIM
KAI SUH SUH
Cable Clips
Caps
Communication Connectors
Conduits
PCB Parts
Plastic Screws
RJ45 Modular Plug And Plug Cover
Value Pack
Wiring Ducts
Bushings
Cable Clamps
Cable Gland
Cable Marker
Cable Tie
Fasteners
Terminal
Cord End Terminal
Cord End Terminal (double)
Female Lug
Male Lug
- Non Insulated Cord End
- Wire Connector/Nut
- Blade Terminal
- Flanged Spade Terminal
- Fully Receptacle
- Hook Terminal
- Insulated Bullet
- Insulated Ring Terminal
- Insulated Ring Terminal Easy Entry
- Insulated Y Terminal
- Insulated Y Terminal Easy Entry
- Pin Terminals
- Ring Terminal
- Y Terminal
Tubes
Wire Connectors
Wrapping Bands
PHOENIX CONTACT
AUTOMATE
CONNECT
Cables and lines for signals, data, and power
Connectors for device connection and field cabling
Distribution blocks for load and control current distribution
Distributors, adapters, and conductor connectors for reliable signal, data, and power cabling
Electronics housings for the DIN rail and for field applications
Accessories and HMI components for electronics housings
Customer-specific electronics housings
Development kits for electronics housings
DIN rail housings for control cabinet applications
BC modular electronics housings for building automation
EH basic electronics housings for universal applications
Electronics housings for Raspberry Pi applications
ICS modular electronics housings for IoT applications
ME MAX modular electronics housings in a flexible modular design
ME modular electronics housings in an easy-to-install cup shape
ME-IO multifunctional electronics housings with modular front connection technology
ME-PLC multifunctional housings for controllers
UM-ALU extruded profile housings for high EMC
UM-BASIC extruded profile housings for custom PCB sizes
UM-PRO extruded profile housings for high temperature resistance
Field housings for outdoor use
FINEPITCH board-to-board connectors for the connection of PCBs within the device
PCB terminal blocks and PCB connectors
Plug-in test systems for protection technology and control engineering
System cabling for controllers
Terminal Blocks
Disconnect and knife-disconnect terminal blocks
- End Cover
Feed-through terminal blocks, multi-conductor terminal blocks, and multi-level terminal blocks
Fuse terminal blocks, component terminal blocks, and diode terminal blocks
High-current terminal blocks
Hybrid terminal blocks
Installation terminal blocks
Marshaling panels
Marshalling patchboards
Micro and miniature terminal blocks
Plug-in terminal blocks
Sensor terminal blocks and actuator terminal block
UT Screw
- UK Universal
- TB Screw
PT Push-in Terminal block
ST Spring-cage Terminal block
QT Fast
RT Bolt
- SK Shield
MARK, ASSEMBLE, AND INSTALL
Automatic tools
Control cabinet accessories
Crimp connectors
Ferrules
Hand tools for industry and manual work
Industrial lighting and signal technology
Junction boxes and empty enclosures
Marking material for industrial identification
Printers
Software for control cabinet building
Worker assistance systems
SUPPLY, CHARGE, AND PROTECT
CHARX – Charging technology for e-mobility
DC/DC converters and DC/AC inverters
Device circuit breakers
EMC filters for a reliable power supply
Power distributors: The system with integrated busbar for your control cabinet
Protective relays for mains protection
Redundancy modules
Surge protection and lightning protection
Uninterruptible power supplies (UPS)
Power Supply
SWITCH, MEASURE AND MONITOR
TERMINAL BLOCK
Accessories
- SCHNEIDER
Phoenix Contact
Surge protection device – D-UFB-V24/S-DSUB 9/SB-B – 2762773
*Description: Attachment plug with surge voltage fine protection for V.24 interface. Connection: D-SUB-9 male/female plug, for installation in lines
*Country of origin: DE (Germany)
Surge protection device D-UFB-V24/S-DSUB 9/SB-B – 2762773 là bộ chống sét cho đường RS 232 D-UFB, gắn nối tiếp với đường dây cần bảo vệ, điện áp norminal voltage: 24VDC, thiết kế gắp trên Din Rail loại connector D-SUB 9 chân.
Sơ đồ dây bên trong:
Kích thước
Height | : 84.6 mm |
---|---|
Width | : 24.5 mm |
Depth | : 54.5 mm |
Điều kiện môi trường
Nhiệt độ môi trường làm việc | : -40 °C … 60 °C |
---|---|
Chuẩn bảo vệ | : IP20 |
Thông số chung
Housing material | : Aluminum |
---|---|
Màu sắc | : black |
Standards for cearances and creepage distances | : + VDE 0110-1 |
+ IEC 60664-1 | |
Mounting type | : Connection-specific intermediate plugging |
Type | : Attachment plug |
Direction of action | : Line-Line & Line-Signal Ground/Shield & Signal Ground/Shield-Earth Ground |
Thông số bảo vệ mạch
IEC test classification | : + C1 |
---|---|
+ C3 | |
VDE requirement class | : + C1 |
+ C3 | |
Maximum continuous voltage UC | : 15 V DC |
Maximum continuous voltage UC (line-earth) | |
Maximum continuous voltage UC (line-signalground) | : 15 V DC |
Nominal current IN | : 1 A (60 °C) |
Operating effective current IC at UC | : ≤ 5 µA |
Residual current IPE | : ≤ 1 µA |
Nominal discharge current In (8/20) µs (line-line) | : 300 A |
Nominal discharge current In (8/20) µs (line-earth) | : 300 A |
Nominal discharge current In (8/20) µs (line-signal ground) | : 300 A |
Nominal discharge current In (8/20) µs (signalground-earth) | : 5 kA |
Total surge current (8/20) µs | : 5 kA |
Max. discharge current Imax (8/20) µs maximum (line-earth) | : 300 A |
Nominal pulse current Ian (10/1000) µs (line-earth) | : 59 A |
Output voltage limitation at 1 kV/µs (line-earth) spike | : ≤ 650 V |
Output voltage limitation at 1 kV/µs (line-signalground) spike | : ≤ 22 V |
Output voltage limitation at 1 kV/µs (line-shield) spike | : ≤ 22 V |
Output voltage limitation at 1 kV/µs (line-earth) static | : ≤ 650 V |
Output voltage limitation at 1 kV/µs (line-signalground) static | : ≤ 22 V |
Residual voltage at In (line-signalground) | : ≤ 28 V |
Residual voltage with Ian (10/1000) µs (line-signalground) | : ≤ 25 V |
Voltage protection level Up (line-line) | |
Voltage protection level Up (line-earth) | : ≤ 650 V |
Voltage protection level Up (line-signalground) | : ≤ 28 V |
Response time tA (line-line) | : ≤ 1 ns |
Response time tA (line-signalground) | : ≤ 1 ns |
Response time tA (line-earth) | : ≤ 100 ns |
Input attenuation aE, asym. | : + 0.1 dB (≤ 300 kHz) |
+ 0.1 dB (≤ 30 kHz) | |
Cut-off frequency fg (3 dB), asym. (GND) in 50 Ohm system | : typ. 2.5 MHz |
Cut-off frequency fg (3 dB), asym. (GND) in 600 Ohm system | : typ. 200 kHz |
Impulse durability (line-line) | : C1 – 500 V / 250 A |
Impulse durability (line-earth) | : + C1 – 500 V / 250 A |
+ C3 – 25 A |
Dữ liệu kết nối
Connection method | : D-SUB-9 |
---|---|
Connection method IN | : D-SUB-9 plug |
Connection method OUT | : D-SUB-9 socket |
Connection technology | : V.24 |
Tiêu chuẩn và quy định
Standards/regulations | : IEC 61643-21 |
---|---|
Standards/specifications | : IEC 61643-21 2000 |
Classifications
eCl@ss
eCl@ss 4.0 | 27140201 |
---|---|
eCl@ss 4.1 | 27130801 |
eCl@ss 5.0 | 27130801 |
eCl@ss 5.1 | 27130801 |
eCl@ss 6.0 | 27130807 |
eCl@ss 8.0 | 27130807 |
eCl@ss 9.0 | 27130807 |
ETIM
ETIM 2.0 | EC000943 |
---|---|
ETIM 3.0 | EC000943 |
ETIM 4.0 | EC000943 |
ETIM 5.0 | EC000943 |
UNSPSC
UNSPSC 6.01 | 30212010 |
---|---|
UNSPSC 7.0901 | 39121610 |
UNSPSC 11 | 39121610 |
UNSPSC 12.01 | 39121610 |
UNSPSC 13.2 | 39121620 |
Sản phẩm tương tự
-
PHOENIX CONTACT
Feed-through terminal block – UK 10 N – 3005073
₫1.70Thêm vào giỏ hàng*Description: Feed-through terminal block, nom. voltage: 800 V, nominal current: 57 A, connection method: Screw connection, number of connections: 2, cross section: 0.5 mm² – 16 mm², AWG: 20 – 6, width: 10.2 mm, color: gray, mounting type: NS 35/7,5, NS 35/15, NS 32
*Country of origin: CN (China)
Your advantages
-All universal terminal blocks in the UK… series can also be used in the Ex e area according to IEC/EN 60079 as standard
-The corresponding EC-type examination numbers for Ex approval can be found in the technical connection data
-
PHOENIX CONTACT
Plug-in bridge – FBS 10-5 – 3030213
₫2.28Thêm vào giỏ hàng*Description: Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 50.6 mm, number of positions: 10, color: red
*Country of origin: DE (Germany)
Your advantages
-The 2- to 50-pos. jumpers can bridge up to 50 terminal blocks in the two bridge shafts of the CLIPLINE complete system in one step
-
PHOENIX CONTACT
Surge protection device – DT-TELE-RJ45 – 2882925
Đọc tiếp*Description: Attachment plug with surge protection for analog and digital telecommunications interfaces (VDSL up to 50 Mbps). Connection: RJ45 (RJ12/RJ11) and screw terminal block (COMBICON). Alternatively, can be snapped onto a DIN rail.
*Country of origin: DE (Germany)
Your advantages
-For analog and digital (DSL) telecommunications interface
-Connection: RJ45 socket and/or plug-in screw terminal blocks
-The adapter included enables conversion from RJ45 to RJ11 and RJ12
-DIN rail mounting possible by removing the cover cap
-International use thanks to multiple assignment
Giỏ hàng
Liên hệ:
Phoenix Contact
ADLINK – Máy tính Công nghiệp
KSS (đầu Cos, phụ kiện KSS)