Categories
- Máy tính công nghiệp ADLINK
- PLASTIM
- KAI SUH SUH
- Cable Clips
- Caps
- Communication Connectors
- Conduits
- PCB Parts
- Plastic Screws
- RJ45 Modular Plug And Plug Cover
- Value Pack
- Wiring Ducts
- Bushings
- Cable Clamps
- Cable Gland
- Cable Marker
- Cable Tie
- Fasteners
- Terminal
- Cord End Terminal
- Cord End Terminal (double)
- Female Lug
- Male Lug
- Non Insulated Cord End
- Wire Connector/Nut
- Blade Terminal
- Flanged Spade Terminal
- Fully Receptacle
- Hook Terminal
- Insulated Bullet
- Insulated Ring Terminal
- Insulated Ring Terminal Easy Entry
- Insulated Y Terminal
- Insulated Y Terminal Easy Entry
- Pin Terminals
- Ring Terminal
- Y Terminal
- Tubes
- Wire Connectors
- Wrapping Bands
- PHOENIX CONTACT
- AUTOMATE
- CONNECT
- Cables and lines for signals, data, and power
- Connectors for device connection and field cabling
- Distribution blocks for load and control current distribution
- Distributors, adapters, and conductor connectors for reliable signal, data, and power cabling
- Electronics housings for the DIN rail and for field applications
- Accessories and HMI components for electronics housings
- Customer-specific electronics housings
- Development kits for electronics housings
- DIN rail housings for control cabinet applications
- BC modular electronics housings for building automation
- EH basic electronics housings for universal applications
- Electronics housings for Raspberry Pi applications
- ICS modular electronics housings for IoT applications
- ME MAX modular electronics housings in a flexible modular design
- ME modular electronics housings in an easy-to-install cup shape
- ME-IO multifunctional electronics housings with modular front connection technology
- ME-PLC multifunctional housings for controllers
- UM-ALU extruded profile housings for high EMC
- UM-BASIC extruded profile housings for custom PCB sizes
- UM-PRO extruded profile housings for high temperature resistance
- Field housings for outdoor use
- FINEPITCH board-to-board connectors for the connection of PCBs within the device
- PCB terminal blocks and PCB connectors
- Plug-in test systems for protection technology and control engineering
- System cabling for controllers
- Terminal Blocks
- Disconnect and knife-disconnect terminal blocks
- End Cover
- Feed-through terminal blocks, multi-conductor terminal blocks, and multi-level terminal blocks
- Fuse terminal blocks, component terminal blocks, and diode terminal blocks
- High-current terminal blocks
- Hybrid terminal blocks
- Installation terminal blocks
- Marshaling panels
- Marshalling patchboards
- Micro and miniature terminal blocks
- Plug-in terminal blocks
- Sensor terminal blocks and actuator terminal block
- UT Screw
- UK Universal
- TB Screw
- PT Push-in Terminal block
- ST Spring-cage Terminal block
- QT Fast
- RT Bolt
- SK Shield
- MARK, ASSEMBLE, AND INSTALL
- Automatic tools
- Control cabinet accessories
- Crimp connectors
- Ferrules
- Hand tools for industry and manual work
- Industrial lighting and signal technology
- Junction boxes and empty enclosures
- Marking material for industrial identification
- Printers
- Software for control cabinet building
- Worker assistance systems
- SUPPLY, CHARGE, AND PROTECT
- CHARX – Charging technology for e-mobility
- DC/DC converters and DC/AC inverters
- Device circuit breakers
- EMC filters for a reliable power supply
- Power distributors: The system with integrated busbar for your control cabinet
- Protective relays for mains protection
- Redundancy modules
- Surge protection and lightning protection
- Uninterruptible power supplies (UPS)
- Power Supply
- SWITCH, MEASURE AND MONITOR
- TERMINAL BLOCK
- Accessories
- SCHNEIDER
Phoenix Contact
Chống sét Profibus dạng giắc cắm – Surge protection device – D-UFB-PB – 2880642
*Description: Fine surge protection in a 9-pos. D-SUB plug for PROFIBUS-DP applications with a transmission speed of up to 12 Mbps.
*Country of origin: DE (Germany)
Your advantages
-Integrated termination resistor
-Data transmission speed up to 12 Mbps
-Direct use at the interface
D-UFB-PB – 2880642 Chống sét Profibus dạng giắc cắm D-Sub 9 chân cho truyền thông PROFIBUS-DP với tốc độ 12 Mbps. Là dòng chống sét bảo vệ thiết bị đầu cuối dùng cho thiết bị hoặc cổng truyền thông profibus đặc biệt nhạy cảm , quan trong.
Sơ đồ thiết bị:
Dimensions
Height | 58 mm |
---|---|
Width | 44.5 mm |
Depth | 16.6 mm |
Ambient conditions
Ambient temperature (operation) | -20 °C … 75 °C |
---|---|
Ambient temperature (storage/transport) | -20 °C … 75 °C |
Degree of protection | IP40 |
General
Housing material | ABS, metal-plated |
---|---|
Color | silver |
Standards for cearances and creepage distances | IEC 60664-1 |
DIN VDE 0110-1 | |
Overvoltage category | II |
Degree of pollution | 2 |
Mounting type | Direct assembly on the device interface |
Type | Connecting plug |
Number of positions | 4 |
Direction of action | Line-Line & Line-Earth Ground |
Sản phẩm tương tự
-
PHOENIX CONTACT
Feed-through terminal block – UK 16 N – 3006043
₫1.85Thêm vào giỏ hàng*Description: Feed-through terminal block, nom. voltage: 800 V, nominal current: 76 A, connection method: Screw connection, number of connections: 2, cross section: 2.5 mm² – 25 mm², AWG: 14 – 4, width: 12.2 mm, color: gray, mounting type: NS 35/7,5, NS 35/15, NS 32
*Country of origin: CN (China)
Your advantages
-All universal terminal blocks in the UK… series can also be used in the Ex e area according to IEC/EN 60079 as standard
-The corresponding EC-type examination numbers for Ex approval can be found in the technical connection data
-
PHOENIX CONTACT
Switch công nghiệp FL SWITCH SFNB 8TX-2891002
Đọc tiếp*Description: Ethernet switch, 8 TP RJ45 ports, automatic detection of data transmission speed of 10/100 Mbps (RJ45), autocrossing function
*Country of origin: TW (Taiwan)
Your advantages
-Auto negotiation and autocrossing detection simplifies installation and setup
-Local diagnostic indicators with LEDs
-RJ45 ports support a transmission speed of 10/100 Mbps
-
PHOENIX CONTACT
Installation terminal block – UIK 35 – 3006182
Đọc tiếp*Description: Installation terminal block, Screw connection, cross section: 0.75 mm² – 35 mm², AWG: 18 – 2, width: 15.2 mm, color: gray, mounting type: NS 35/7,5, NS 35/15, NS 32
*Country of origin: CN (China)
Your advantages
Your advantages
-Installation terminal blocks with a particularly low-profile design for use in flat distributors
-The asymmetrical arrangement of the terminal blocks on the DIN rail enables the neutral busbar to be routed past the terminal blocks
Giỏ hàng
Liên hệ:
Phoenix Contact
ADLINK – Máy tính Công nghiệp
KSS (đầu Cos, phụ kiện KSS)