Relay mỏng của Phoenix contact, được sản xuất đầu tiên trên thế giới với mục đích tiết kiệm không gian, thời gian đáp ứng ngắn hơn để bắt kịp vòng lặp của thiết bị PLC lập trình, ngoài ra tạo giao diện người dùng thân thiện và an toàn cho hệ thống tự động hoá. Khi sử dụng SLIM RELAY-INTERFACE RELAY – PLC-RSC- 24DC/21 – 2966171 hệ thống sẽ tin cậy hơn.
Ngoài ra SLIM RELAY-INTERFACE RELAY – PLC-RSC- 24DC/21 – 2966171 còn được dùng như một bộ đệm cách ly ngõ vào ra của PLC giúp bảo vệ PLC tốt hơn
PLC relay 2966171, consisting of base terminal block PLC-BSC…/21 with screw connection and pluggable miniature relay with power contact, for assembly on DIN rail NS 35/7.5, 1 PDT, input voltage 24 V DC
Your advantages
- Slim design
- Efficient connection to system cabling using V8 adapter
- RT III sealed relay
- Safe isolation according to DIN EN 50178 between coil and contact
- Functional plug-in bridges
- Integrated input circuit and interference suppression circuit
Key Commercial Data
Orderkey |
2966171 |
Packing unit |
10 pc |
Catalog page |
Page 364 (C-5-2019) |
GTIN |
4017918130732 |
Weight per Piece (excluding packing) |
31.060 g |
Custom tariff number |
85364190 |
Country of origin |
DE (Germany) |
Classifications
Drawings
|
|
|
Diagram
Curve A
Maximum permissible continuous voltage Umax with limiting continuous current on the contact side (see relevant technical data)
Curve B
Minimum permissible operate voltage Uop after pre-excitation (see relevant technical data)
|
|
Diagram
Interrupting rating
|
|
|
|
Circuit diagram
|
Back to top
Note
Utilization restriction |
EMC: class A product, see manufacturer’s declaration in the download area |
Note |
Separating plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC… or FBST 500…. |
Back to top
Dimensions
Width |
6.2 mm |
Height |
80 mm |
Depth |
94 mm |
Back to top
Ambient conditions
Ambient temperature (operation) |
-40 °C … 60 °C |
Ambient temperature (storage/transport) |
-40 °C … 85 °C |
Degree of protection |
RT III (Relay) |
|
IP20 (Relay base) |
|
≥ IP54 (Installation location) |
Back to top
Coil side
Nominal input voltage UN |
24 V DC |
Typical input current at UN |
9 mA |
Typical response time |
5 ms |
Typical release time |
8 ms |
Protective circuit |
Reverse polarity protection Polarity protection diode |
|
Free-wheeling diode Damping diode |
Operating voltage display |
Yellow LED |
Power dissipation for nominal condition |
0.22 W |
Back to top
Contact side
Contact type |
1 PDT |
Type of switch contact |
Single contact |
Contact material |
AgSnO |
Maximum switching voltage |
250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC… or …FBST 500…) |
Minimum switching voltage |
5 V (at 100 mA) |
Min. switching current |
10 mA (at 12 V) |
Maximum inrush current |
10 A (4 s) |
Limiting continuous current |
6 A |
Interrupting rating (ohmic load) max. |
140 W (at 24 V DC) |
|
20 W (at 48 V DC) |
|
18 W (at 60 V DC) |
|
23 W (at 110 V DC) |
|
40 W (at 220 V DC) |
|
1500 VA (for 250 V AC) |
Switching capacity |
2 A (at 24 V, DC13) |
|
0.2 A (at 110 V, DC13) |
|
0.1 A (at 220 V, DC13) |
|
3 A (at 24 V, AC15) |
|
3 A (at 120 V, AC15) |
|
3 A (at 230 V, AC15) |
Back to top
General
Test voltage relay winding/relay contact |
4 kV AC (50 Hz, 1 min.) |
Operating mode |
100% operating factor |
Flammability rating according to UL 94 |
V0 (Housing) |
Mechanical service life |
2x 107 cycles |
Mounting position |
any |
Assembly instructions |
In rows with zero spacing |
Back to top
Connection data
Connection name |
Coil side |
Connection method |
Screw connection |
Stripping length |
8 mm |
Screw thread |
M3 |
Conductor cross section solid |
0.14 mm² … 2.5 mm² |
Conductor cross section flexible |
0.14 mm² … 2.5 mm² |
|
0.2 mm² … 2.5 mm² (Single ferrule) |
|
2x 0.5 mm² … 1.5 mm² (TWIN ferrule) |
Conductor cross section AWG |
26 … 14 |
Back to top
Connection data 2
Connection name |
Contact side |
Connection method |
Screw connection |
Stripping length |
8 mm |
Screw thread |
M3 |
Conductor cross section solid |
0.14 mm² … 2.5 mm² |
Conductor cross section flexible |
0.14 mm² … 2.5 mm² |
|
0.2 mm² … 2.5 mm² (Single ferrule) |
|
2x 0.5 mm² … 1.5 mm² (TWIN ferrule) |
Conductor cross section AWG |
26 … 14 |
Back to top
Standards and Regulations
Connection in acc. with standard |
CUL |
Designation |
Standards/regulations |
Standards/regulations |
IEC 60664 |
|
EN 50178 |
Pollution degree |
3 |
Overvoltage category |
III |
There are no reviews yet.