Categories
Máy tính công nghiệp ADLINK
PLASTIM
KAI SUH SUH
Cable Clips
Caps
Communication Connectors
Conduits
PCB Parts
Plastic Screws
RJ45 Modular Plug And Plug Cover
Value Pack
Wiring Ducts
Bushings
Cable Clamps
Cable Gland
Cable Marker
Cable Tie
Fasteners
Terminal
Cord End Terminal
Cord End Terminal (double)
Female Lug
Male Lug
- Non Insulated Cord End
- Wire Connector/Nut
- Blade Terminal
- Flanged Spade Terminal
- Fully Receptacle
- Hook Terminal
- Insulated Bullet
- Insulated Ring Terminal
- Insulated Ring Terminal Easy Entry
- Insulated Y Terminal
- Insulated Y Terminal Easy Entry
- Pin Terminals
- Ring Terminal
- Y Terminal
Tubes
Wire Connectors
Wrapping Bands
PHOENIX CONTACT
AUTOMATE
CONNECT
Cables and lines for signals, data, and power
Connectors for device connection and field cabling
Distribution blocks for load and control current distribution
Distributors, adapters, and conductor connectors for reliable signal, data, and power cabling
Electronics housings for the DIN rail and for field applications
Accessories and HMI components for electronics housings
Customer-specific electronics housings
Development kits for electronics housings
DIN rail housings for control cabinet applications
BC modular electronics housings for building automation
EH basic electronics housings for universal applications
Electronics housings for Raspberry Pi applications
ICS modular electronics housings for IoT applications
ME MAX modular electronics housings in a flexible modular design
ME modular electronics housings in an easy-to-install cup shape
ME-IO multifunctional electronics housings with modular front connection technology
ME-PLC multifunctional housings for controllers
UM-ALU extruded profile housings for high EMC
UM-BASIC extruded profile housings for custom PCB sizes
UM-PRO extruded profile housings for high temperature resistance
Field housings for outdoor use
FINEPITCH board-to-board connectors for the connection of PCBs within the device
PCB terminal blocks and PCB connectors
Plug-in test systems for protection technology and control engineering
System cabling for controllers
Terminal Blocks
Disconnect and knife-disconnect terminal blocks
- End Cover
Feed-through terminal blocks, multi-conductor terminal blocks, and multi-level terminal blocks
Fuse terminal blocks, component terminal blocks, and diode terminal blocks
High-current terminal blocks
Hybrid terminal blocks
Installation terminal blocks
Marshaling panels
Marshalling patchboards
Micro and miniature terminal blocks
Plug-in terminal blocks
Sensor terminal blocks and actuator terminal block
UT Screw
- UK Universal
- TB Screw
PT Push-in Terminal block
ST Spring-cage Terminal block
QT Fast
RT Bolt
- SK Shield
MARK, ASSEMBLE, AND INSTALL
Automatic tools
Control cabinet accessories
Crimp connectors
Ferrules
Hand tools for industry and manual work
Industrial lighting and signal technology
Junction boxes and empty enclosures
Marking material for industrial identification
Printers
Software for control cabinet building
Worker assistance systems
SUPPLY, CHARGE, AND PROTECT
CHARX – Charging technology for e-mobility
DC/DC converters and DC/AC inverters
Device circuit breakers
EMC filters for a reliable power supply
Power distributors: The system with integrated busbar for your control cabinet
Protective relays for mains protection
Redundancy modules
Surge protection and lightning protection
Uninterruptible power supplies (UPS)
Power Supply
SWITCH, MEASURE AND MONITOR
TERMINAL BLOCK
Accessories
- SCHNEIDER
Phoenix Contact
Q7-BW
Qseven Standard Size Module with Intel® Pentium™ and Celeron™ Processor N3000 Series SoC (codename: Braswell)
Datasheet: Download
- Intel® Pentium™ and Celeron™ Processor N3000 Series SoC (codename: Braswell)
- 2x 64bit memory channel with up to 8GB DDR3L at 1600 MHz
- Dual channel LVDS, HDMI/DP
- 2x MIPI CSI camera interface, 3x PCIe, GbE
- 2x SATA3 or 1x SATA and 1x SATA-SSD (optional)
Introduction
The Q7-BW is scheduled to be EOLed.
Last Buy Date: 2019/06/30
Last Shipment Date: 2019/12/31
The Q7-BW Computer-On-Module (COM) combines the Qseven® 2.0 standard with the Intel® Pentium® and Celeron® N-3000 series System-on-Chip (SoC), providing an ideal solution for low power consumption and high, pin/area density requirements. The module provides the high integration, high performance, low power, and ruggedness favored by Internet-of-Things (IoT) applications such as retail transactional clients, digital signage, and in-vehicle infotainment systems. The Qseven form factor affords a more compact profile and footprint than the other COM platforms. Mechanical dimensions of 70mm width and 70mm length with 2.3mm of overall height ranks Qseven as the smallest COM standard currently available. The Q7-BW module utilizes the Intel N3000 series SoC, which is based on the new Intel Architecture and is manufactured on Intel’s industry-leading, tri-gate 14nm process. The module primarily targets entry-level 2-in-1 devices, laptops, desktops, and all-in-one PCs and supports contemporary, high-bandwidth interfaces such as Ultra HD HDMI, PCI Express Gen2, Gigabit Ethernet, USB 3.0, SATA Gen3, and a state-of-the-art HD Audio interface. The module generates its own LVDS (18/24bit), TMDS, and Display Port video signals using DDI output from the SoC. A series of optional eMMC devices offers up to 64GB of on-board NAND Flash storage with an MMC interface, and an optional SATA, Solid State Drive (SSD) provides up to 64GB of on-board NAND Flash storage. Two SPI Flash chips implement a fail-safe BIOS, allowing the user to boot the module even if current BIOS settings have corrupted the system. Under the management of the BMC chip (Board Management Controller), the SEMA utility (Smart Embedded Management Agent) provides system control, security, and failure protection—counting, monitoring, and measuring hardware and software events, and using the SMBus to send corrective commands to the SoC. The optional SEMA Cloud utility not only controls local events on the module but system client events on the IoT.
Sản phẩm tương tự
-
Qseven
Q7-BT
Đọc tiếpQseven Module with 4th Generation Intel Atom® Processor E3800 Series SoC (formerly codename: BayTrail)
Key Features- Single, dual or quad core 4th Generation Intel® Atom™ Processor E3800 Series System-on-Chip
- Up to 4 GB DDR3L at 1066/1333 MHz
- HDMI 1.4b and dual channel LVDS
- GbE, MIPI CSI camera interface
- 2x SATA 3Gb/s or 1x SATA and 1x SATA-SSD
-
Qseven
Q7-AL
Đọc tiếpQseven® Standard Size Module with Intel Atom® E3900, Pentium® N4200 and Celeron® N3350 Processor (codename: Apollo Lake)
Datasheet: Download
Key Features
- 3x independent displays, up to 4k2k video supported
- 2x USB 3.0 and 6x USB 2.0
- 2x SATA 6Gb/s, 1x onboard SATA SSD
- Up to 8GB Fast LPDDR4 at 2400 MHz
- Supports Smart Embedded Management Agent (SEMA) functions
- Qseven 2.1 compliant
- Windows 10 IoT Enterprise/Core and Yocto Linux supported
Giỏ hàng
Liên hệ:
Phoenix Contact
ADLINK – Máy tính Công nghiệp
KSS (đầu Cos, phụ kiện KSS)
Đánh giá
Chưa có đánh giá nào.