Categories
- Máy tính công nghiệp ADLINK
- PLASTIM
- KAI SUH SUH
- Cable Clips
- Caps
- Communication Connectors
- Conduits
- PCB Parts
- Plastic Screws
- RJ45 Modular Plug And Plug Cover
- Value Pack
- Wiring Ducts
- Bushings
- Cable Clamps
- Cable Gland
- Cable Marker
- Cable Tie
- Fasteners
- Terminal
- Cord End Terminal
- Cord End Terminal (double)
- Female Lug
- Male Lug
- Non Insulated Cord End
- Wire Connector/Nut
- Blade Terminal
- Flanged Spade Terminal
- Fully Receptacle
- Hook Terminal
- Insulated Bullet
- Insulated Ring Terminal
- Insulated Ring Terminal Easy Entry
- Insulated Y Terminal
- Insulated Y Terminal Easy Entry
- Pin Terminals
- Ring Terminal
- Y Terminal
- Tubes
- Wire Connectors
- Wrapping Bands
- PHOENIX CONTACT
- AUTOMATE
- CONNECT
- Cables and lines for signals, data, and power
- Connectors for device connection and field cabling
- Distribution blocks for load and control current distribution
- Distributors, adapters, and conductor connectors for reliable signal, data, and power cabling
- Electronics housings for the DIN rail and for field applications
- Accessories and HMI components for electronics housings
- Customer-specific electronics housings
- Development kits for electronics housings
- DIN rail housings for control cabinet applications
- BC modular electronics housings for building automation
- EH basic electronics housings for universal applications
- Electronics housings for Raspberry Pi applications
- ICS modular electronics housings for IoT applications
- ME MAX modular electronics housings in a flexible modular design
- ME modular electronics housings in an easy-to-install cup shape
- ME-IO multifunctional electronics housings with modular front connection technology
- ME-PLC multifunctional housings for controllers
- UM-ALU extruded profile housings for high EMC
- UM-BASIC extruded profile housings for custom PCB sizes
- UM-PRO extruded profile housings for high temperature resistance
- Field housings for outdoor use
- FINEPITCH board-to-board connectors for the connection of PCBs within the device
- PCB terminal blocks and PCB connectors
- Plug-in test systems for protection technology and control engineering
- System cabling for controllers
- Terminal Blocks
- Disconnect and knife-disconnect terminal blocks
- End Cover
- Feed-through terminal blocks, multi-conductor terminal blocks, and multi-level terminal blocks
- Fuse terminal blocks, component terminal blocks, and diode terminal blocks
- High-current terminal blocks
- Hybrid terminal blocks
- Installation terminal blocks
- Marshaling panels
- Marshalling patchboards
- Micro and miniature terminal blocks
- Plug-in terminal blocks
- Sensor terminal blocks and actuator terminal block
- UT Screw
- UK Universal
- TB Screw
- PT Push-in Terminal block
- ST Spring-cage Terminal block
- QT Fast
- RT Bolt
- SK Shield
- MARK, ASSEMBLE, AND INSTALL
- Automatic tools
- Control cabinet accessories
- Crimp connectors
- Ferrules
- Hand tools for industry and manual work
- Industrial lighting and signal technology
- Junction boxes and empty enclosures
- Marking material for industrial identification
- Printers
- Software for control cabinet building
- Worker assistance systems
- SUPPLY, CHARGE, AND PROTECT
- CHARX – Charging technology for e-mobility
- DC/DC converters and DC/AC inverters
- Device circuit breakers
- EMC filters for a reliable power supply
- Power distributors: The system with integrated busbar for your control cabinet
- Protective relays for mains protection
- Redundancy modules
- Surge protection and lightning protection
- Uninterruptible power supplies (UPS)
- Power Supply
- SWITCH, MEASURE AND MONITOR
- TERMINAL BLOCK
- Accessories
- SCHNEIDER
Phoenix Contact
Bộ nguồn – TRIO-PS/3AC/24DC/ 5 – 2866462
*Description: Primary-switched TRIO POWER power supply for DIN rail mounting, input: 3-phase, output: 24 V DC/5 A
*Country of origin: CN (China)
Your advantages
-Use the third negative terminal block as a grounding terminal block and minimize installation costs
-Rugged design with metal housing and wide temperature range from -25 to +70°C
-Maximum operational reliability thanks to high MTBF (mean time between failures) of more than 500,000 hours and high dielectric strength of up to 300 V AC
-Compensation of voltage drops by means of output voltage that can be adjusted on the front
Dimensions
Width | 40 mm |
---|---|
Height | 130 mm |
Depth | 115 mm |
Ambient conditions
Degree of protection | IP20 |
---|---|
Ambient temperature (operation) | -25 °C … 70 °C (> 55° C derating : 2.5%/K) |
Ambient temperature (storage/transport) | -40 °C … 85 °C |
Max. permissible relative humidity (operation) | ≤ 95 % (at 25 °C, non-condensing) |
Climatic class | 3K3 (in acc. with EN 60721) |
Degree of pollution | 2 |
Input data
Nominal input voltage range | 2x / 3x 400 V AC … 500 V AC |
---|---|
Input voltage range | 3x 320 V AC … 575 V AC (for 3-phase operation) |
2x 360 V AC … 575 V AC (for 2-phase operation) | |
AC frequency range | 45 Hz … 65 Hz |
Discharge current to PE | < 3.5 mA |
Current consumption | 3x 0.3 A (400 V AC) |
3x 0.25 A (500 V AC) | |
2x 0.65 A (400 V AC) | |
2x 0.5 A (500 V AC) | |
Nominal power consumption | 211 VA |
Inrush current | < 15 A |
Mains buffering time | > 20 ms (3x 400 V AC) |
> 30 ms (3x 480 V AC) | |
Recommended breaker for input protection | 6 A … 16 A (Characteristics B, C, D, K) |
Power factor (cos phi) | 0.64 |
Type of protection | Transient surge protection |
Protective circuit/component | Varistor |
Output data
Nominal output voltage | 24 V DC ±1 % |
---|---|
Setting range of the output voltage (USet) | 22.5 V DC … 29.5 V DC (> 24 V DC, constant capacity restricted) |
Nominal output current (IN) | 5 A (UOUT = 24 V DC) |
Derating | 55 °C … 70 °C (2.5%/K) |
Connection in parallel | Yes, for redundancy and increased capacity |
Connection in series | yes |
Feedback voltage resistance | 35 V DC |
Protection against overvoltage at the output (OVP) | < 35 V DC |
Max. capacitive load | unlimited |
Active current limitation | Approx 6 A (in the event of a short-circuit) |
Control deviation | < 1 % (change in load, static 10 % … 90 %) |
< 2 % (change in load, dynamic 10 % … 90 %) | |
< 0.1 % (change in input voltage ±10 %) | |
Residual ripple | < 30 mVPP |
Output power | 120 W |
Typical response time | < 1 s |
Peak switching voltages nominal load | < 30 mVPP |
Maximum power dissipation in no-load condition | 4 W |
Power loss nominal load max. | 15 W |
Sản phẩm tương tự
-
PHOENIX CONTACT
End clamp – E/UK – 1201442
₫0.80Thêm vào giỏ hàng*Description: End clamp, width: 9.5 mm, height: 35.3 mm, material: PA, length: 50.5 mm, Mounting on a DIN rail NS 32 or NS 35, color: gray
*Country of origin: IN (India)
Your advantages
-With universal foot for NS 35 and NS 32 DIN rails
-Tall and low-profile designs
-Large-surface labeling
-
PHOENIX CONTACT
Industrial Ethernet Switch – FL SWITCH SFN 5TX – 2891152
₫236.00Thêm vào giỏ hàng*Description: Ethernet switch, 5 TP RJ45 ports, automatic detection of data transmission speed of 10 or 100 Mbps (RJ45), autocrossing function
*Country of origin: TW (Taiwan)
Your advantages
-Local diagnostic indicators with LEDs
-The switch also offers cable locking and port blocking
-RJ45 ports support a transmission speed of 10/100 Mbps; fiber optic ports support 100 Mbps
-QoS-prioritized (Quality of Service) messages
-
PHOENIX CONTACT
Feed-through terminal block – UK 10 N – 3005073
₫1.70Thêm vào giỏ hàng*Description: Feed-through terminal block, nom. voltage: 800 V, nominal current: 57 A, connection method: Screw connection, number of connections: 2, cross section: 0.5 mm² – 16 mm², AWG: 20 – 6, width: 10.2 mm, color: gray, mounting type: NS 35/7,5, NS 35/15, NS 32
*Country of origin: CN (China)
Your advantages
-All universal terminal blocks in the UK… series can also be used in the Ex e area according to IEC/EN 60079 as standard
-The corresponding EC-type examination numbers for Ex approval can be found in the technical connection data
Giỏ hàng
Liên hệ:
Phoenix Contact
ADLINK – Máy tính Công nghiệp
KSS (đầu Cos, phụ kiện KSS)
Đánh giá
Chưa có đánh giá nào.