Categories
Máy tính công nghiệp ADLINK
PLASTIM
KAI SUH SUH
Cable Clips
Caps
Communication Connectors
Conduits
PCB Parts
Plastic Screws
RJ45 Modular Plug And Plug Cover
Value Pack
Wiring Ducts
Bushings
Cable Clamps
Cable Gland
Cable Marker
Cable Tie
Fasteners
Terminal
Cord End Terminal
Cord End Terminal (double)
Female Lug
Male Lug
- Non Insulated Cord End
- Wire Connector/Nut
- Blade Terminal
- Flanged Spade Terminal
- Fully Receptacle
- Hook Terminal
- Insulated Bullet
- Insulated Ring Terminal
- Insulated Ring Terminal Easy Entry
- Insulated Y Terminal
- Insulated Y Terminal Easy Entry
- Pin Terminals
- Ring Terminal
- Y Terminal
Tubes
Wire Connectors
Wrapping Bands
PHOENIX CONTACT
AUTOMATE
CONNECT
Cables and lines for signals, data, and power
Connectors for device connection and field cabling
Distribution blocks for load and control current distribution
Distributors, adapters, and conductor connectors for reliable signal, data, and power cabling
Electronics housings for the DIN rail and for field applications
Accessories and HMI components for electronics housings
Customer-specific electronics housings
Development kits for electronics housings
DIN rail housings for control cabinet applications
BC modular electronics housings for building automation
EH basic electronics housings for universal applications
Electronics housings for Raspberry Pi applications
ICS modular electronics housings for IoT applications
ME MAX modular electronics housings in a flexible modular design
ME modular electronics housings in an easy-to-install cup shape
ME-IO multifunctional electronics housings with modular front connection technology
ME-PLC multifunctional housings for controllers
UM-ALU extruded profile housings for high EMC
UM-BASIC extruded profile housings for custom PCB sizes
UM-PRO extruded profile housings for high temperature resistance
Field housings for outdoor use
FINEPITCH board-to-board connectors for the connection of PCBs within the device
PCB terminal blocks and PCB connectors
Plug-in test systems for protection technology and control engineering
System cabling for controllers
Terminal Blocks
Disconnect and knife-disconnect terminal blocks
- End Cover
Feed-through terminal blocks, multi-conductor terminal blocks, and multi-level terminal blocks
Fuse terminal blocks, component terminal blocks, and diode terminal blocks
High-current terminal blocks
Hybrid terminal blocks
Installation terminal blocks
Marshaling panels
Marshalling patchboards
Micro and miniature terminal blocks
Plug-in terminal blocks
Sensor terminal blocks and actuator terminal block
UT Screw
- UK Universal
- TB Screw
PT Push-in Terminal block
ST Spring-cage Terminal block
QT Fast
RT Bolt
- SK Shield
MARK, ASSEMBLE, AND INSTALL
Automatic tools
Control cabinet accessories
Crimp connectors
Ferrules
Hand tools for industry and manual work
Industrial lighting and signal technology
Junction boxes and empty enclosures
Marking material for industrial identification
Printers
Software for control cabinet building
Worker assistance systems
SUPPLY, CHARGE, AND PROTECT
CHARX – Charging technology for e-mobility
DC/DC converters and DC/AC inverters
Device circuit breakers
EMC filters for a reliable power supply
Power distributors: The system with integrated busbar for your control cabinet
Protective relays for mains protection
Redundancy modules
Surge protection and lightning protection
Uninterruptible power supplies (UPS)
Power Supply
SWITCH, MEASURE AND MONITOR
TERMINAL BLOCK
Accessories
- SCHNEIDER
Phoenix Contact
MXC-6400 Series
High-Performance 6th Generation Intel® Core™ i7/i5/i3 Processor-Based Fanless Embedded Computer
Datasheet
Key Features
- 6th Generation Intel® Core™ i7/i5/i3 Processors and QM170 chipset
- 2x DDR4 SO-DIMM sockets support up to 32GB memory
- 1x PCI and 2x PCIe Gen3 x8 (or 1x PCIe Gen3 x16) slots
- 2x Mini PCIe and 1x USIM slots
- Support for 3 independent displays with 2x DisplayPort and 1x DVI-I ports
- 3x Intel® GbE LAN ports with teaming function, Intel® iAMT 11.0
- 2x 2.5″ hot-swappable SATA III (6.0 Gb/s) trays on the front panel and 2x internal SATA III (6Gb/s) ports with RAID 0/1/5/10 support
- Remote power on/off switch connector on the front panel
Introduction
The Matrix MXC-6400 series is a line of high-performance fanless embedded computers, integrating 6th generation Intel® Core™ i7/i5/i3 processors and the QM170 chipset for more powerful computing and graphics performance with minimal power consumption.
Features include 3 PCI/PCIe expansion slots allowing installation of a variety of off-the-shelf PCI/PCIe cards for configurable applications, 2 internal mPCIe, and 1 USIM slot for 3G communication. In addition, the MXC-6400 series offers independent digital display support from DisplayPort and DVI-I with HD 4K resolution, as well as 6 USB 3.0 and 3 GbE LAN ports with Intel® iAMT 11.0 and teaming function. The two hot-swappable SATA III ports support 2.5″ storage in the front panel with high speed SATA 6.0 Gb/s and two onboard SATA III internal ports carry RAID 0, 1, 5, 10 support. Optional 16 channel isolated DI/O with digital filter meets the needs of general purpose industrial automation.
With its compact construction, flexibility, and rich I/O capacity, the MXC-6400 is an ideal choice for a wide range of applications supporting factory and machine automation, surveillance, railway and maritime automation, and in-vehicle transportation systems.
ADLINK’s Matrix MXC-6400 series of rugged fanless embedded computers support Intel® Solid State Drive (SSD) E 5400s Series, offering a power-conserving solution with superior durability, performance and security across a variety of applications.
Software Support
OS Support
- WindowsR 10/7/Embedded Standard 7
- LinuxsR Ubuntu 12.04 and Fedora 18
Ordering Information
-
MXC-6401DIntel Core i7-6820EQ fanless embedded computer
-
MXC-6402DIntel Core i5-6440EQ fanless embedded computer
-
MXC-6403DIntel Core i3-6100E fanless embedded computer
Accessory
-
MXC-6400 Optional Fan ModuleHot-pluggable fan module for MXC-6400 series
-
8/16/32 GB DDR4 OptionUpgrade to 8/16/32 GB DDR4 Memory
-
500GB/1TB HDD OptionFactory-installed 500GB/1TB SATA hard disk drive
-
8/16 GB CFast OptionFactory-installed 8/16 GB industrial grade CFast module
-
32/64 GB SSD OptionFactory-installed 32GB SLC or 64GB MLC industrial grade SATA solid-state drive
-
160W AC-DC Adapter160W industrial grade AC-DC adapter
Sản phẩm tương tự
-
MXC-6600 Series
MXC-6600 Series
Đọc tiếp9th Gen Intel® Xeon®, Core™ i7/i3 and 8th Gen Intel® Core™ i5 Processor-Based Embedded Fanless Computer
Datasheet
Key Features
-
- 9th Gen Intel® Xeon®, Core™ i7/i3 and 8th Gen Intel® Core™ i5 Processor
- Dual SODIMMs for up to 32GB DDR4
- Rich I/O: 2x DP++, 1x HDMI, 2x GbE, 6x COM, 8-ch DI, 8-ch DO, TPM 2.0
- 2x USB 3.1 Gen2, 2x USB 3.1 Gen1, 4x USB 2.0
- Rich storage: up to 4 internal 2.5″ SATA 6 Gb/s ports with RAID 0/1/5/10 support, CFast, M.2 2280
- Embedded expansion: 1x Mini PCIe, 1x M.2 3042, 2x USIM
- Flexible modular expansion with 2 or 4 slots
-
Giỏ hàng
Liên hệ:
Phoenix Contact
ADLINK – Máy tính Công nghiệp
KSS (đầu Cos, phụ kiện KSS)
Đánh giá
Chưa có đánh giá nào.