Categories
Máy tính công nghiệp ADLINK
PLASTIM
KAI SUH SUH
Cable Clips
Caps
Communication Connectors
Conduits
PCB Parts
Plastic Screws
RJ45 Modular Plug And Plug Cover
Value Pack
Wiring Ducts
Bushings
Cable Clamps
Cable Gland
Cable Marker
Cable Tie
Fasteners
Terminal
Cord End Terminal
Cord End Terminal (double)
Female Lug
Male Lug
- Non Insulated Cord End
- Wire Connector/Nut
- Blade Terminal
- Flanged Spade Terminal
- Fully Receptacle
- Hook Terminal
- Insulated Bullet
- Insulated Ring Terminal
- Insulated Ring Terminal Easy Entry
- Insulated Y Terminal
- Insulated Y Terminal Easy Entry
- Pin Terminals
- Ring Terminal
- Y Terminal
Tubes
Wire Connectors
Wrapping Bands
PHOENIX CONTACT
AUTOMATE
CONNECT
Cables and lines for signals, data, and power
Connectors for device connection and field cabling
Distribution blocks for load and control current distribution
Distributors, adapters, and conductor connectors for reliable signal, data, and power cabling
Electronics housings for the DIN rail and for field applications
Accessories and HMI components for electronics housings
Customer-specific electronics housings
Development kits for electronics housings
DIN rail housings for control cabinet applications
BC modular electronics housings for building automation
EH basic electronics housings for universal applications
Electronics housings for Raspberry Pi applications
ICS modular electronics housings for IoT applications
ME MAX modular electronics housings in a flexible modular design
ME modular electronics housings in an easy-to-install cup shape
ME-IO multifunctional electronics housings with modular front connection technology
ME-PLC multifunctional housings for controllers
UM-ALU extruded profile housings for high EMC
UM-BASIC extruded profile housings for custom PCB sizes
UM-PRO extruded profile housings for high temperature resistance
Field housings for outdoor use
FINEPITCH board-to-board connectors for the connection of PCBs within the device
PCB terminal blocks and PCB connectors
Plug-in test systems for protection technology and control engineering
System cabling for controllers
Terminal Blocks
Disconnect and knife-disconnect terminal blocks
- End Cover
Feed-through terminal blocks, multi-conductor terminal blocks, and multi-level terminal blocks
Fuse terminal blocks, component terminal blocks, and diode terminal blocks
High-current terminal blocks
Hybrid terminal blocks
Installation terminal blocks
Marshaling panels
Marshalling patchboards
Micro and miniature terminal blocks
Plug-in terminal blocks
Sensor terminal blocks and actuator terminal block
UT Screw
- UK Universal
- TB Screw
PT Push-in Terminal block
ST Spring-cage Terminal block
QT Fast
RT Bolt
- SK Shield
MARK, ASSEMBLE, AND INSTALL
Automatic tools
Control cabinet accessories
Crimp connectors
Ferrules
Hand tools for industry and manual work
Industrial lighting and signal technology
Junction boxes and empty enclosures
Marking material for industrial identification
Printers
Software for control cabinet building
Worker assistance systems
SUPPLY, CHARGE, AND PROTECT
CHARX – Charging technology for e-mobility
DC/DC converters and DC/AC inverters
Device circuit breakers
EMC filters for a reliable power supply
Power distributors: The system with integrated busbar for your control cabinet
Protective relays for mains protection
Redundancy modules
Surge protection and lightning protection
Uninterruptible power supplies (UPS)
Power Supply
SWITCH, MEASURE AND MONITOR
TERMINAL BLOCK
Accessories
- SCHNEIDER
Phoenix Contact
Switch mạng công nghiệp- FL SWITCH 1000T-8POE-GT-2SFP – 1026929
Note
Utilization restriction | EMC: class A product, see manufacturer’s declaration in the download area |
---|
Ambient conditions
Degree of protection | IP30 |
---|---|
Ambient temperature (operation) | -40 °C … 75 °C |
Ambient temperature (storage/transport) | -40 °C … 85 °C |
Permissible humidity (operation) | 5 % … 95 % (non-condensing) |
Permissible humidity (storage/transport) | 5 % … 95 % (non-condensing) |
Air pressure (operation) | 57 kPa … 108 kPa (up to 4850 m above mean sea level) |
Air pressure (storage/transport) | 57 kPa … 108 kPa (up to 4850 m above mean sea level) |
Interfaces
Interface | Ethernet (PoE) |
---|---|
No. of ports | 8 (RJ45 ports) |
Connection method | RJ45 jack |
Transmission physics | Ethernet RJ45 |
Transmission speed | 10/100/1000 Mbps |
Transmission length | 100 m (Between transmitter / receiver) |
Signal LEDs | LNK/ACT, POE |
Interface | Fiber optic interface |
No. of ports | 2 (SFP ports) |
Transmission physics | Depending on the SFP module |
Transmission speed | 1000 Mbps (full duplex) |
Transmission length | up to 80 km (Depending on the fiber/SFP module used) |
Function
Basic functions | Store-and-forward switch, 10/100/1000 Mbps, auto negotiation, redundant power supply, PoE according to IEEE 802.3at/802.3af, jumbo frames up to 10240 bytes, alarm contact |
---|---|
Additional functions | Autonegotiation |
Status and diagnostic indicators | LEDs: US1, US2 (redundant voltage supply), Alarm (alarm contact), Link/Activity and PoE per Ethernet port |
Signal contact control voltage | 48 V DC |
Signal contact control current | 0.5 A |
Network expansion parameters
Cascading depth | Network, linear, and star structure: any |
---|---|
Maximum conductor length (twisted pair) | 100 m |
Supply voltage
Supply voltage | 24 V DC |
---|---|
48 V DC | |
Residual ripple | 3.6 VPP (within the permitted voltage range) |
Supply voltage range | 18 V DC … 57 V DC |
Typical current consumption | 470 mA (at US = 24 V DC) |
Max. current consumption | 6.2 A (Maximum, nominal load) |
Inrush current | 30.8 A (24 V DC for 1050 μs) |
General
Mounting type | DIN rail |
---|---|
Type AX | Stand-alone |
Net weight | 1151 g |
Note | Mode A PoE |
MTTF | 39.1 Years (MIL-HDBK-217F standard, temperature 25°C, operating cycle 100%) |
Connection data
Connection method | COMBICON plug-in screw terminal block |
---|---|
Conductor cross section solid min. | 0.2 mm² |
Conductor cross section solid max. | 2.5 mm² |
Conductor cross section flexible min. | 0.2 mm² |
Conductor cross section flexible max. | 2.5 mm² |
Conductor cross section AWG min. | 24 |
Conductor cross section AWG max. | 12 |
Stripping length | 7 mm |
Standards and Regulations
Electromagnetic compatibility | Conformance with EMC Directive 2004/108/EC |
---|---|
Conformance | CE-compliant |
Environmental Product Compliance
REACh SVHC | Lead 7439-92-1 |
---|---|
China RoHS | Environmentally Friendly Use Period = 10; |
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer’s declaration” |
Sản phẩm tương tự
-
PHOENIX CONTACT
Type 1+2 protective device combination – FLT-SEC-T1+T2-3S-350/25-FM – 2905470
Đọc tiếp*Description: Plug-in lightning and surge arrester combination, in accordance with Type 1+2/Class I+II, for 3-phase power supply networks, with separate N and PE (L1, L2, L3, PE, N).
*Country of origin: DE (Germany)
Your advantages
-Directly coordinated combination of type 1 spark gap without line follow current and type 2 varistor arrester
-Particularly suitable for maximum protection of sensitive devices in harsh environments
-High continuous voltage of 350 V AC for 230/400 V AC networks with high voltage fluctuations
-Pluggable
-Low voltage protection level of 1.5 kV
-Optical, mechanical status indicator
-With floating remote indication contact
-Plugs can be checked with CHECKMASTER 2
-
PHOENIX CONTACT
Feed-through terminal block – UK 10 N – 3005073
₫1.70Thêm vào giỏ hàng*Description: Feed-through terminal block, nom. voltage: 800 V, nominal current: 57 A, connection method: Screw connection, number of connections: 2, cross section: 0.5 mm² – 16 mm², AWG: 20 – 6, width: 10.2 mm, color: gray, mounting type: NS 35/7,5, NS 35/15, NS 32
*Country of origin: CN (China)
Your advantages
-All universal terminal blocks in the UK… series can also be used in the Ex e area according to IEC/EN 60079 as standard
-The corresponding EC-type examination numbers for Ex approval can be found in the technical connection data
-
PHOENIX CONTACT
End clamp – E/UK – 1201442
₫0.80Thêm vào giỏ hàng*Description: End clamp, width: 9.5 mm, height: 35.3 mm, material: PA, length: 50.5 mm, Mounting on a DIN rail NS 32 or NS 35, color: gray
*Country of origin: IN (India)
Your advantages
-With universal foot for NS 35 and NS 32 DIN rails
-Tall and low-profile designs
-Large-surface labeling
-
PHOENIX CONTACT
3044814 – Cầu đấu dây 2 tầng cho dây 4mm² – Double-level terminal block – UTTB 4
Đọc tiếpDouble-level terminal block 4mm², Cầu nối dây 2 tầng cho dây 4mm²
– Loại cầu đấu Loại vặn vít có 2 đầu đấu nối, 2 tầng kết nối dây
– Tiết diện dây dành cho dây từ 0.14 mm² – 6 mm²
– Áp danh định : 800V
– Dòng danh định : 30A , Dòng Max 36A
– Kích thước : rộng 6,2mm
– Màu xám nhạt
– Cách gắn cài trên thanh Din chuẩn NS32, NS35/15, NS35/7.5
– Vật liệu chế tạo : Bằng nhựa màu xám, bền, dẻo và chống cháy nổ EX
– Các chứng chỉ công nhận CSA / UL/ KEMA-KEUR / cUL/ LR / PRS / KR / NK / LR / EAC IECEE CB Scheme /IECEx / ATEX / UL/ EAC Ex / GL / cULusĐịa chỉ: Số 48 đường số 5 khu đô thị Vạn Phúc, P. Hiệp Bình Phước, Q. Thủ Đức, TP. Hồ Chí Minh, Việt Nam
Hotline: 1900 6697
Email: info@thien-son.com.vnLuôn đặt lợi ích của khách hàng lên hàng đầu, giữ vững đạo đức trong kinh doanh.
“Lợi ích của bạn – thành công của chúng tôi; thành công của bạn – niềm vui của chúng tôi”.
Giỏ hàng
Liên hệ:
Phoenix Contact
ADLINK – Máy tính Công nghiệp
KSS (đầu Cos, phụ kiện KSS)
Đánh giá
Chưa có đánh giá nào.