Categories
Máy tính công nghiệp ADLINK
PLASTIM
KAI SUH SUH
Cable Clips
Caps
Communication Connectors
Conduits
PCB Parts
Plastic Screws
RJ45 Modular Plug And Plug Cover
Value Pack
Wiring Ducts
Bushings
Cable Clamps
Cable Gland
Cable Marker
Cable Tie
Fasteners
Terminal
Cord End Terminal
Cord End Terminal (double)
Female Lug
Male Lug
- Non Insulated Cord End
- Wire Connector/Nut
- Blade Terminal
- Flanged Spade Terminal
- Fully Receptacle
- Hook Terminal
- Insulated Bullet
- Insulated Ring Terminal
- Insulated Ring Terminal Easy Entry
- Insulated Y Terminal
- Insulated Y Terminal Easy Entry
- Pin Terminals
- Ring Terminal
- Y Terminal
Tubes
Wire Connectors
Wrapping Bands
PHOENIX CONTACT
AUTOMATE
CONNECT
Cables and lines for signals, data, and power
Connectors for device connection and field cabling
Distribution blocks for load and control current distribution
Distributors, adapters, and conductor connectors for reliable signal, data, and power cabling
Electronics housings for the DIN rail and for field applications
Accessories and HMI components for electronics housings
Customer-specific electronics housings
Development kits for electronics housings
DIN rail housings for control cabinet applications
BC modular electronics housings for building automation
EH basic electronics housings for universal applications
Electronics housings for Raspberry Pi applications
ICS modular electronics housings for IoT applications
ME MAX modular electronics housings in a flexible modular design
ME modular electronics housings in an easy-to-install cup shape
ME-IO multifunctional electronics housings with modular front connection technology
ME-PLC multifunctional housings for controllers
UM-ALU extruded profile housings for high EMC
UM-BASIC extruded profile housings for custom PCB sizes
UM-PRO extruded profile housings for high temperature resistance
Field housings for outdoor use
FINEPITCH board-to-board connectors for the connection of PCBs within the device
PCB terminal blocks and PCB connectors
Plug-in test systems for protection technology and control engineering
System cabling for controllers
Terminal Blocks
Disconnect and knife-disconnect terminal blocks
- End Cover
Feed-through terminal blocks, multi-conductor terminal blocks, and multi-level terminal blocks
Fuse terminal blocks, component terminal blocks, and diode terminal blocks
High-current terminal blocks
Hybrid terminal blocks
Installation terminal blocks
Marshaling panels
Marshalling patchboards
Micro and miniature terminal blocks
Plug-in terminal blocks
Sensor terminal blocks and actuator terminal block
UT Screw
- UK Universal
- TB Screw
PT Push-in Terminal block
ST Spring-cage Terminal block
QT Fast
RT Bolt
- SK Shield
MARK, ASSEMBLE, AND INSTALL
Automatic tools
Control cabinet accessories
Crimp connectors
Ferrules
Hand tools for industry and manual work
Industrial lighting and signal technology
Junction boxes and empty enclosures
Marking material for industrial identification
Printers
Software for control cabinet building
Worker assistance systems
SUPPLY, CHARGE, AND PROTECT
CHARX – Charging technology for e-mobility
DC/DC converters and DC/AC inverters
Device circuit breakers
EMC filters for a reliable power supply
Power distributors: The system with integrated busbar for your control cabinet
Protective relays for mains protection
Redundancy modules
Surge protection and lightning protection
Uninterruptible power supplies (UPS)
Power Supply
SWITCH, MEASURE AND MONITOR
TERMINAL BLOCK
Accessories
- SCHNEIDER
Phoenix Contact
HPERC-KBL-MH
Rugged Convection Cooled System with Intel® Xeon® Processor and MIL-DTL-38999 Connectors
Datasheet: Download
Key Features
- VITA 75 mount with passive convection cooling
- Intel® Xeon® Processor E3-1505M v6, quad-core; 16GB DDR4-2400 with ECC soldered down
- Compliant with MIL-STD-810G/461F/704F/1275E
- Quad Gigabit Ethernet and 6x USB ports
- Available GPGPU on PCI Express x16 Gen3
- 3 independent displays (DVI/VGA)
- Wide temperature range: storage -40°C to +85°C, operating -40°C to +75°C
- OS support: Windows 10, RHEL 7.3
Introduction
Inside the tiny footprint of ADLINK’s HPERC lives the power of Intel® Xeon® processor and optional GPGPU parallel processing engine based on a NVIDIA Quadro MXM module. Dual removable secure erase RAID-0 SSDs provide 12Gb/s throughput and security for deployment in hostile environments.
Easy configuration and expansion allows for fast integration of custom rugged embedded applications. Uniquely-keyed MIL-DTL-38999 connectors provide a wide array of fast IO. The HPERC reserves connector pins for expansion interfaces. The GPGPU sits on a 16-lane 3rd generation PCI Express interface to enable image processing and other applications driven by AI and Deep Learning technologies. Built with proven Ampro (acquired by ADLINK in 2008) reliability, the rugged capabilities of the HPERC are ideal for ground, air and sea deployments in military and aerospace. The HPERC systems survive shock, resist corrosion and galvanic oxidation, and perform in the humid jungle, the heat of the desert, and the bitter cold of frozen mountain passes.
In addition to Intel’s constantly evolving roadmap, NVIDIA’s many-core GPUs have transformed some areas of sensor processing, including radar, wide-area surveillance, and hyper spectral imaging, due the inherent suitability of parallel processing of those data sets. While this parallel processing paradigm has rapidly increased the processing capability within a given SWaP envelope, the real gains are yet to be exploited – the advent of Deep Learning will likely power the next wave of systems capabilities.
Image processing methods perform operations to enhance an image and/or extract useful information from it. Applications include pattern of life analysis, surveillance, reconnaissance, target identification, and geolocation in GPS-denied areas. For example, to collect tens of thousands of hours of aerial surveillance video and other theaters of operation. Turning what are often grainy, shaky videos taken by drones or satellites into clean image streams suitable for analysis — especially real-time analysis — poses a massive computational burden. According to NVIDIA and Motion DSP, GPUs can process such video seven times faster than CPU-only approaches. Coupled with NVIDIA’s CUDA graphics processing and the OpenGL API, ADLINK’s HPERC, provides solution engineers with a powerful COTS (commercial off-the-shelf) sub-system with which they can design the next generation of image processing systems. More applications, including:
● ISR platforms (intelligence, surveillance and reconnaissance)
● Radar processing
● Software-defined radio (SDR)
● Sonar processing
● Forward looking infrared radiometry (FLIR)
Certifications & Standards
Immersion
IEC60529, IP-67
Salt Spray
RTCA/DO-160G, Section 14, Category S
Altitude
0 to 50,000 ft.
Relative Humidity
95% at +60°C non-condensing
Shock
MIL-STD-810G – 516.6 Procedures I and V
Vibration
MIL-STD-810G – 514.6 Procedure I Categories 4, 9, 11, 21
EMI/EMC
MIL-STD-461F
Power
MIL-STD-704F & MIL-STD-1275E
Operating Temp.
MIL-STD-810G – 501.5 Procedure II
MIL-STD-810G – 502.5, Procedure 1 and 2
-
HPERC-KBLMH-100XNFinned-convection, Intel® Xeon® E3-1505M v6, 16GB RAM
-
HPERC-X-03HPERC breakout cable kit including Amphenol MIL-STD Nkey & Akey (I/O cables), and AC adapter
-
GPU MXM moduleMXM NVIDIA Quadro P1000 GPU card, with 4GB GDDR5 memory (must be pre-assembled at ADLINK factory)
Sản phẩm tương tự
-
Rugged SFF Platforms
HPERC-IBR-HH
Đọc tiếpRugged Finned-convection System with 3rd Gen Intel® Core™ i7 Processor and MIL-DTL-38999 High Speed ConnectorsThe HPERC-IBR-HH is scheduled for discontinuation as of 2020/03/01. The recommended replacement product is HPERC-KBL-MH.Datasheet: DownloadKey Features
- Tested to MIL-STD-810G and MIL-STD-461F standards; IP67 rating SWaP efficient sealed SFF System
- VITA 75.21 mount with passive cooling
- Intel® Core™ i7 dual or quad core Processor
- Soldered DDR3L-1333 8GB, up to 16GB RAM
- Quad Gigabit Ethernet; dual independent displays (HDMI/DVI/VGA)
- Available GPGPU on 16-lane 3rd Generation PCI Express
- Rugged operating temperature: -40°C to +75°C
- OS support: VxWorks 6.9, Ubuntu, Windows® 7 and WES7
-
Rugged SFF Platforms
HPERC-IBR-MH
Đọc tiếpRugged Finned-Convection System with 3rd Gen Intel® Core™ i7 Processor and MIL-DTL-38999 ConnectorsThe HPERC-IBR-MH is scheduled for discontinuation as of 2020/03/01. The recommended replacement product is HPERC-KBL-MH.Datasheet: DownloadKey Features
- Tested to MIL-STD-810G and MIL-STD-461F standards; IP67 rating SWaP efficient sealed SFF System
- VITA 75.21 mount with passive cooling
- Intel® Core™ i7 dual or quad core Processor
- Soldered DDR3L-1333 8GB, up to 16GB RAM
- Quad Gigabit Ethernet; dual independent displays (DVI/VGA)
- Available GPGPU on 16-lane 3rd Generation PCI Express
- Simple user expansion and configuration
- OS support: VxWorks 6.9, Ubuntu, Windows® 7 and WES7
-
Rugged SFF Platforms
HPERC-KBL-MC
Đọc tiếpExtreme Rugged Cold Plate Mount System with Intel® Xeon® Processor and MIL-DTL-38999 Connectors
Datasheet: Download
Key Features
- VITA 75 cold plate mounting
- Intel® Xeon® Processor E3-1505M v6, quad-core; 16GB DDR4-2400 with ECC soldered down
- Compliant with MIL-STD-810G/461F/704F/1275E
- Quad Gigabit Ethernet and 6x USB ports
- Available GPGPU on PCI Express x16 Gen3
- 3 independent displays (DVI/VGA)
- Wide temperature range: storage -40°C to +85°C, operating -40°C to +75°C
- OS support: Windows 10, RHEL 7.3
Giỏ hàng
Liên hệ:
Phoenix Contact
ADLINK – Máy tính Công nghiệp
KSS (đầu Cos, phụ kiện KSS)
Đánh giá
Chưa có đánh giá nào.