Categories
- Máy tính công nghiệp ADLINK
- PLASTIM
- KAI SUH SUH
- Cable Clips
- Caps
- Communication Connectors
- Conduits
- PCB Parts
- Plastic Screws
- RJ45 Modular Plug And Plug Cover
- Value Pack
- Wiring Ducts
- Bushings
- Cable Clamps
- Cable Gland
- Cable Marker
- Cable Tie
- Fasteners
- Terminal
- Cord End Terminal
- Cord End Terminal (double)
- Female Lug
- Male Lug
- Non Insulated Cord End
- Wire Connector/Nut
- Blade Terminal
- Flanged Spade Terminal
- Fully Receptacle
- Hook Terminal
- Insulated Bullet
- Insulated Ring Terminal
- Insulated Ring Terminal Easy Entry
- Insulated Y Terminal
- Insulated Y Terminal Easy Entry
- Pin Terminals
- Ring Terminal
- Y Terminal
- Tubes
- Wire Connectors
- Wrapping Bands
- PHOENIX CONTACT
- AUTOMATE
- CONNECT
- Cables and lines for signals, data, and power
- Connectors for device connection and field cabling
- Distribution blocks for load and control current distribution
- Distributors, adapters, and conductor connectors for reliable signal, data, and power cabling
- Electronics housings for the DIN rail and for field applications
- Accessories and HMI components for electronics housings
- Customer-specific electronics housings
- Development kits for electronics housings
- DIN rail housings for control cabinet applications
- BC modular electronics housings for building automation
- EH basic electronics housings for universal applications
- Electronics housings for Raspberry Pi applications
- ICS modular electronics housings for IoT applications
- ME MAX modular electronics housings in a flexible modular design
- ME modular electronics housings in an easy-to-install cup shape
- ME-IO multifunctional electronics housings with modular front connection technology
- ME-PLC multifunctional housings for controllers
- UM-ALU extruded profile housings for high EMC
- UM-BASIC extruded profile housings for custom PCB sizes
- UM-PRO extruded profile housings for high temperature resistance
- Field housings for outdoor use
- FINEPITCH board-to-board connectors for the connection of PCBs within the device
- PCB terminal blocks and PCB connectors
- Plug-in test systems for protection technology and control engineering
- System cabling for controllers
- Terminal Blocks
- Disconnect and knife-disconnect terminal blocks
- End Cover
- Feed-through terminal blocks, multi-conductor terminal blocks, and multi-level terminal blocks
- Fuse terminal blocks, component terminal blocks, and diode terminal blocks
- High-current terminal blocks
- Hybrid terminal blocks
- Installation terminal blocks
- Marshaling panels
- Marshalling patchboards
- Micro and miniature terminal blocks
- Plug-in terminal blocks
- Sensor terminal blocks and actuator terminal block
- UT Screw
- UK Universal
- TB Screw
- PT Push-in Terminal block
- ST Spring-cage Terminal block
- QT Fast
- RT Bolt
- SK Shield
- MARK, ASSEMBLE, AND INSTALL
- Automatic tools
- Control cabinet accessories
- Crimp connectors
- Ferrules
- Hand tools for industry and manual work
- Industrial lighting and signal technology
- Junction boxes and empty enclosures
- Marking material for industrial identification
- Printers
- Software for control cabinet building
- Worker assistance systems
- SUPPLY, CHARGE, AND PROTECT
- CHARX – Charging technology for e-mobility
- DC/DC converters and DC/AC inverters
- Device circuit breakers
- EMC filters for a reliable power supply
- Power distributors: The system with integrated busbar for your control cabinet
- Protective relays for mains protection
- Redundancy modules
- Surge protection and lightning protection
- Uninterruptible power supplies (UPS)
- Power Supply
- SWITCH, MEASURE AND MONITOR
- TERMINAL BLOCK
- Accessories
- SCHNEIDER
Phoenix Contact
HPERC-KBL-MC
Extreme Rugged Cold Plate Mount System with Intel® Xeon® Processor and MIL-DTL-38999 Connectors
Datasheet: Download
Key Features
- VITA 75 cold plate mounting
- Intel® Xeon® Processor E3-1505M v6, quad-core; 16GB DDR4-2400 with ECC soldered down
- Compliant with MIL-STD-810G/461F/704F/1275E
- Quad Gigabit Ethernet and 6x USB ports
- Available GPGPU on PCI Express x16 Gen3
- 3 independent displays (DVI/VGA)
- Wide temperature range: storage -40°C to +85°C, operating -40°C to +75°C
- OS support: Windows 10, RHEL 7.3
Introduction
Inside the tiny footprint of ADLINK’s HPERC lives the power of Intel® Xeon® processor and optional GPGPU parallel processing engine based on a NVIDIA Quadro MXM module. Dual removable secure erase RAID-0 SSDs provide 12Gb/s throughput and security for deployment in hostile environments.
Easy configuration and expansion allows for fast integration of custom rugged embedded applications. Uniquely-keyed MIL-DTL-38999 connectors provide a wide array of fast IO. The HPERC reserves connector pins for expansion interfaces. The GPGPU sits on a 16-lane 3rd generation PCI Express interface to enable image processing and other applications driven by AI and Deep Learning technologies. Built with proven Ampro (acquired by ADLINK in 2008) reliability, the rugged capabilities of the HPERC are ideal for ground, air and sea deployments in military and aerospace. The HPERC systems survive shock, resist corrosion and galvanic oxidation, and perform in the humid jungle, the heat of the desert, and the bitter cold of frozen mountain passes.
In addition to Intel’s constantly evolving roadmap, NVIDIA’s many-core GPUs have transformed some areas of sensor processing, including radar, wide-area surveillance, and hyperspectral imaging, due the inherent suitability of parallel processing of those data sets. While this parallel processing paradigm has rapidly increased the processing capability within a given SWaP envelope, the real gains are yet to be exploited – the advent of Deep Learning will likely power the next wave of systems capabilities.
Image processing methods perform operations to enhance an image and/or extract useful information from it. Applications include pattern of life analysis, surveillance, reconnaissance, target identification, and geolocation in GPS-denied areas. For example, to collect tens of thousands of hours of aerial surveillance video and other theaters of operation. Turning what are often grainy, shaky videos taken by drones or satellites into clean image streams suitable for analysis — especially real-time analysis — poses a massive computational burden. According to NVIDIA and Motion DSP, GPUs can process such video seven times faster than CPU-only approaches. Coupled with NVIDIA’s CUDA graphics processing and the OpenGL API, ADLINK’s HPERC, provides solution engineers with a powerful COTS (commercial off-the-shelf) sub-system with which they can design the next generation of image processing systems. More applications, including:
● ISR platforms (intelligence, surveillance and reconnaissance)
● Radar processing
● Software-defined radio (SDR)
● Sonar processing
● Forward looking infrared radiometry (FLIR)
Certifications & Standards
Immersion
IEC60529, IP-67
Salt Spray
RTCA/DO-160G, Section 14, Category S
Shock
MIL-STD-810G – 516.6 Procedures I and V
Vibration
MIL-STD-810G – 514.6 Procedure I Categories 4, 9, 11, 21
EMI/EMC
MIL-STD-461F
Power
MIL-STD-704F & MIL-STD-1275E
Operating Temp.
MIL-STD-810G – 501.5 Procedure II
MIL-STD-810G – 502.5, Procedure 1 and 2
-
HPERC-KBLMC-100XNCold plate, Intel® Xeon® E3-1505M v6, 16GB RAM
-
HPERC-X-03HPERC breakout cable kit including Amphenol MIL-STD Nkey & Akey (I/O cables), and AC Adapter
-
GPGPU MXM moduleMXM NVIDIA Quadro P1000 GPU card, with 4GB GDDR5 memory (must be pre-assembled at ADLINK factory)
Sản phẩm tương tự
-
Rugged SFF Platforms
HPERC-KBL-MH
Đọc tiếpRugged Convection Cooled System with Intel® Xeon® Processor and MIL-DTL-38999 Connectors
Datasheet: Download
Key Features
- VITA 75 mount with passive convection cooling
- Intel® Xeon® Processor E3-1505M v6, quad-core; 16GB DDR4-2400 with ECC soldered down
- Compliant with MIL-STD-810G/461F/704F/1275E
- Quad Gigabit Ethernet and 6x USB ports
- Available GPGPU on PCI Express x16 Gen3
- 3 independent displays (DVI/VGA)
- Wide temperature range: storage -40°C to +85°C, operating -40°C to +75°C
- OS support: Windows 10, RHEL 7.3
-
Rugged SFF Platforms
HPERC-IBR-HH
Đọc tiếpRugged Finned-convection System with 3rd Gen Intel® Core™ i7 Processor and MIL-DTL-38999 High Speed ConnectorsThe HPERC-IBR-HH is scheduled for discontinuation as of 2020/03/01. The recommended replacement product is HPERC-KBL-MH.Datasheet: DownloadKey Features
- Tested to MIL-STD-810G and MIL-STD-461F standards; IP67 rating SWaP efficient sealed SFF System
- VITA 75.21 mount with passive cooling
- Intel® Core™ i7 dual or quad core Processor
- Soldered DDR3L-1333 8GB, up to 16GB RAM
- Quad Gigabit Ethernet; dual independent displays (HDMI/DVI/VGA)
- Available GPGPU on 16-lane 3rd Generation PCI Express
- Rugged operating temperature: -40°C to +75°C
- OS support: VxWorks 6.9, Ubuntu, Windows® 7 and WES7
-
Rugged SFF Platforms
HPERC-IBR-MH
Đọc tiếpRugged Finned-Convection System with 3rd Gen Intel® Core™ i7 Processor and MIL-DTL-38999 ConnectorsThe HPERC-IBR-MH is scheduled for discontinuation as of 2020/03/01. The recommended replacement product is HPERC-KBL-MH.Datasheet: DownloadKey Features
- Tested to MIL-STD-810G and MIL-STD-461F standards; IP67 rating SWaP efficient sealed SFF System
- VITA 75.21 mount with passive cooling
- Intel® Core™ i7 dual or quad core Processor
- Soldered DDR3L-1333 8GB, up to 16GB RAM
- Quad Gigabit Ethernet; dual independent displays (DVI/VGA)
- Available GPGPU on 16-lane 3rd Generation PCI Express
- Simple user expansion and configuration
- OS support: VxWorks 6.9, Ubuntu, Windows® 7 and WES7
Giỏ hàng
Liên hệ:
Phoenix Contact
ADLINK – Máy tính Công nghiệp
KSS (đầu Cos, phụ kiện KSS)
Đánh giá
Chưa có đánh giá nào.