Categories
- Máy tính công nghiệp ADLINK
- PLASTIM
- KAI SUH SUH
- Cable Clips
- Caps
- Communication Connectors
- Conduits
- PCB Parts
- Plastic Screws
- RJ45 Modular Plug And Plug Cover
- Value Pack
- Wiring Ducts
- Bushings
- Cable Clamps
- Cable Gland
- Cable Marker
- Cable Tie
- Fasteners
- Terminal
- Cord End Terminal
- Cord End Terminal (double)
- Female Lug
- Male Lug
- Non Insulated Cord End
- Wire Connector/Nut
- Blade Terminal
- Flanged Spade Terminal
- Fully Receptacle
- Hook Terminal
- Insulated Bullet
- Insulated Ring Terminal
- Insulated Ring Terminal Easy Entry
- Insulated Y Terminal
- Insulated Y Terminal Easy Entry
- Pin Terminals
- Ring Terminal
- Y Terminal
- Tubes
- Wire Connectors
- Wrapping Bands
- PHOENIX CONTACT
- AUTOMATE
- CONNECT
- Cables and lines for signals, data, and power
- Connectors for device connection and field cabling
- Distribution blocks for load and control current distribution
- Distributors, adapters, and conductor connectors for reliable signal, data, and power cabling
- Electronics housings for the DIN rail and for field applications
- Accessories and HMI components for electronics housings
- Customer-specific electronics housings
- Development kits for electronics housings
- DIN rail housings for control cabinet applications
- BC modular electronics housings for building automation
- EH basic electronics housings for universal applications
- Electronics housings for Raspberry Pi applications
- ICS modular electronics housings for IoT applications
- ME MAX modular electronics housings in a flexible modular design
- ME modular electronics housings in an easy-to-install cup shape
- ME-IO multifunctional electronics housings with modular front connection technology
- ME-PLC multifunctional housings for controllers
- UM-ALU extruded profile housings for high EMC
- UM-BASIC extruded profile housings for custom PCB sizes
- UM-PRO extruded profile housings for high temperature resistance
- Field housings for outdoor use
- FINEPITCH board-to-board connectors for the connection of PCBs within the device
- PCB terminal blocks and PCB connectors
- Plug-in test systems for protection technology and control engineering
- System cabling for controllers
- Terminal Blocks
- Disconnect and knife-disconnect terminal blocks
- End Cover
- Feed-through terminal blocks, multi-conductor terminal blocks, and multi-level terminal blocks
- Fuse terminal blocks, component terminal blocks, and diode terminal blocks
- High-current terminal blocks
- Hybrid terminal blocks
- Installation terminal blocks
- Marshaling panels
- Marshalling patchboards
- Micro and miniature terminal blocks
- Plug-in terminal blocks
- Sensor terminal blocks and actuator terminal block
- UT Screw
- UK Universal
- TB Screw
- PT Push-in Terminal block
- ST Spring-cage Terminal block
- QT Fast
- RT Bolt
- SK Shield
- MARK, ASSEMBLE, AND INSTALL
- Automatic tools
- Control cabinet accessories
- Crimp connectors
- Ferrules
- Hand tools for industry and manual work
- Industrial lighting and signal technology
- Junction boxes and empty enclosures
- Marking material for industrial identification
- Printers
- Software for control cabinet building
- Worker assistance systems
- SUPPLY, CHARGE, AND PROTECT
- CHARX – Charging technology for e-mobility
- DC/DC converters and DC/AC inverters
- Device circuit breakers
- EMC filters for a reliable power supply
- Power distributors: The system with integrated busbar for your control cabinet
- Protective relays for mains protection
- Redundancy modules
- Surge protection and lightning protection
- Uninterruptible power supplies (UPS)
- Power Supply
- SWITCH, MEASURE AND MONITOR
- TERMINAL BLOCK
- Accessories
- SCHNEIDER
Phoenix Contact
HPERC-IBR-HH
Key Features
- Tested to MIL-STD-810G and MIL-STD-461F standards; IP67 rating SWaP efficient sealed SFF System
- VITA 75.21 mount with passive cooling
- Intel® Core™ i7 dual or quad core Processor
- Soldered DDR3L-1333 8GB, up to 16GB RAM
- Quad Gigabit Ethernet; dual independent displays (HDMI/DVI/VGA)
- Available GPGPU on 16-lane 3rd Generation PCI Express
- Rugged operating temperature: -40°C to +75°C
- OS support: VxWorks 6.9, Ubuntu, Windows® 7 and WES7
Introduction
HPERC-IBR-HH has scheduled to be EOL.
Last buy date: 2020/3/1
Last shipment date: 2020/6/1
Replacement: HPERC-KBL-MH
Inside the tiny footprint of HPERC lives the power of 3rd generation Intel® Core™ i7 processor and optional GPGPU parallel processing engine. Dual removable SSDs provide 12Gb/s throughput and security for deployment in hostile environments. Easy configuration and expansion allows for fast integration of custom rugged embedded applications. HPERC reserves connector pins for expansion interfaces. The GPGPU sits on a 16-lane 3rd generation PCI Express interface. Uniquely-keyed MIL-DTL-38999 connectors provide a wide array of fast IO. Built with proven Ampro reliability, the rugged capabilities of HPERC are ideal for ground, air and sea deployments. HPERC systems survive shock, resist corrosion and galvanic oxidation, and perform in the humid jungle, the heat of the desert, and the bitter cold of frozen mountain passes.
OS support: VxWorks 6.9, Windows 7 and WES7
Sản phẩm tương tự
-
Rugged SFF Platforms
HPERC-IBR-MH
Đọc tiếpRugged Finned-Convection System with 3rd Gen Intel® Core™ i7 Processor and MIL-DTL-38999 ConnectorsThe HPERC-IBR-MH is scheduled for discontinuation as of 2020/03/01. The recommended replacement product is HPERC-KBL-MH.Datasheet: DownloadKey Features
- Tested to MIL-STD-810G and MIL-STD-461F standards; IP67 rating SWaP efficient sealed SFF System
- VITA 75.21 mount with passive cooling
- Intel® Core™ i7 dual or quad core Processor
- Soldered DDR3L-1333 8GB, up to 16GB RAM
- Quad Gigabit Ethernet; dual independent displays (DVI/VGA)
- Available GPGPU on 16-lane 3rd Generation PCI Express
- Simple user expansion and configuration
- OS support: VxWorks 6.9, Ubuntu, Windows® 7 and WES7
-
Rugged SFF Platforms
HPERC-KBL-MH
Đọc tiếpRugged Convection Cooled System with Intel® Xeon® Processor and MIL-DTL-38999 Connectors
Datasheet: Download
Key Features
- VITA 75 mount with passive convection cooling
- Intel® Xeon® Processor E3-1505M v6, quad-core; 16GB DDR4-2400 with ECC soldered down
- Compliant with MIL-STD-810G/461F/704F/1275E
- Quad Gigabit Ethernet and 6x USB ports
- Available GPGPU on PCI Express x16 Gen3
- 3 independent displays (DVI/VGA)
- Wide temperature range: storage -40°C to +85°C, operating -40°C to +75°C
- OS support: Windows 10, RHEL 7.3
-
Rugged SFF Platforms
HPERC-KBL-MC
Đọc tiếpExtreme Rugged Cold Plate Mount System with Intel® Xeon® Processor and MIL-DTL-38999 Connectors
Datasheet: Download
Key Features
- VITA 75 cold plate mounting
- Intel® Xeon® Processor E3-1505M v6, quad-core; 16GB DDR4-2400 with ECC soldered down
- Compliant with MIL-STD-810G/461F/704F/1275E
- Quad Gigabit Ethernet and 6x USB ports
- Available GPGPU on PCI Express x16 Gen3
- 3 independent displays (DVI/VGA)
- Wide temperature range: storage -40°C to +85°C, operating -40°C to +75°C
- OS support: Windows 10, RHEL 7.3
Giỏ hàng
Liên hệ:
Phoenix Contact
ADLINK – Máy tính Công nghiệp
KSS (đầu Cos, phụ kiện KSS)
Đánh giá
Chưa có đánh giá nào.