Flush-type connector - SACC-DSI-FS-4CON-L180/12 SCO

Flush-type connector – SACC-DSI-FS-4CON-L180/12 SCO – 1410777

*Description: Sensor/actuator flush-type socket, 4-pos., M12 SPEEDCON, A-coded, rear/screw mounting with M16 thread, with straight solder connection

*Country of origin: DE (Germany)

Your advantages

-Easy PCB assembly: one-piece connectors for wave soldering

-All standard pin assignments and codings for signal, data, and power transmission with a uniform design-in design

-SPEEDCON fast locking system reduces cabling times

Mua ngay Gọi điện xác nhận và giao hàng tận nơi

Ambient conditions

Ambient temperature (operation)	-25 °C … 85 °C (Plug / socket)
	-40 °C … 85 °C (without mechanical actuation)
Degree of protection	IP67 (When plugged in)
	IP65 (When plugged in)

General

Note	The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.
Rated current at 40°C	4 A
Rated voltage	250 V
Rated surge voltage	2.5 kV
Number of positions	4
Coding	A – standard
Standards/regulations	M12 connector IEC 61076-2-101
Status display	No
Overvoltage category	II
Degree of pollution	3
Connection method	Solder pins
Insertion/withdrawal cycles	> 100
Torque	3 Nm … 4 Nm (Installation-side)

Material

Flammability rating according to UL 94	V0
Contact material	CuZn
Contact surface material	Au
Contact carrier material	PA 6.6
Material, knurls	Zinc die-cast, nickel-plated
Sealing material	NBR

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “Flush-type connector – SACC-DSI-FS-4CON-L180/12 SCO – 1410777”

Sản phẩm tương tự

PHOENIX CONTACT

Chống sét thiết bị – Surge protection device – DT-LAN-CAT.6+ – 2881007

Quick view

*Description: Surge protection in accordance with Class E_A (CAT6_A), for Gigabit Ethernet (up to 10 Gbps), token ring, FDDI/CDDI, ISDN, and DS1. Suitable for Power over Ethernet (PoE+) “Mode A” and “Mode B”. RJ45 attachment plug with separate grounding cable and ground connection snap-on foot for NS 35 DIN rails.

*Country of origin: DE (Germany)

Your advantages

-Reliable transmission speeds up to 10 Gbps

-Protective adapter for eight signal paths via RJ45 connector

-Suitable for category 6 high-speed data networks

-Can be installed in a control cabinet by removing the ground connection adapter

Đọc tiếp

PHOENIX CONTACT

Bộ nguồn – TRIO-PS/1AC/24DC/ 5 – 2866310

Quick view

Mã sản phẩm: 2866310
Tên sản phẩm: Bộ nguồn – TRIO-PS/1AC/24DC/ 5
Hãng sản xuất: Phoenix Contact
Mô tả:Bộ nguồn Trio đầu vào 1 pha AC, đầu ra 24VDC 5 A, mã hàng TRIO-PS/1AC/24DC/ 5 – 2866310 , gắn được trên thanh DIN rail.
Địa chỉ: Số 48 đường số 5 khu đô thị Vạn Phúc, P. Hiệp Bình Phước, Q. Thủ Đức, TP. Hồ Chí Minh, Việt Nam
Hotline: 1900 6697
Email: info@thien-son.com.vn
Luôn đặt lợi ích của khách hàng lên hàng đầu, giữ vững đạo đức trong kinh doanh. “Lợi ích của bạn – thành công của chúng tôi; thành công của bạn – niềm vui của chúng tôi”.