Categories
Máy tính công nghiệp ADLINK
PLASTIM
KAI SUH SUH
- RJ45 Modular Plug And Plug Cover
- Bushings
- Cable Clamps
- Cable Marker
- Cable Tie
- Fasteners
- Terminal
- Cord End Terminal
- Cord End Terminal (double)
- Male Lug
- Non Insulated Cord End
- Blade Terminal
- Flanged Spade Terminal
- Fully Receptacle
- Hook Terminal
- Insulated Bullet
- Insulated Ring Terminal
- Insulated Ring Terminal Easy Entry
- Insulated Y Terminal
- Insulated Y Terminal Easy Entry
- Pin Terminals
- Ring Terminal
- Y Terminal
- Tubes
- Wire Connectors
- Wrapping Bands
PHOENIX CONTACT
- SCHNEIDER
AdvancedTCA
AdvancedTCA Platform
CompactPCI, PC/104, VPX SBCs
CompactPCI/PlusIO/Serial
Computer-On-Modules
GPU & Edge AI
Industrial Motherboards & SBCs
ATX Motherboards
Industrial PCs, Fanless Embedded PCs
Expandable Fanless Embedded PCs
Medically Certified Products
Motion, Machine Vision, Fieldbus
Motion Control
Panel PCs & HMIs
Rugged SFF Platforms & Servers
TERMINAL BLOCK
Accessories
PCB connectors
Tool
Ethernet Switch
SFNB Switch
MCR Technology- MINI MCR
Power Supply
STEP Power supply- Kích thước nhỏ gọn và hiệu quả
Essential Series
Quint Power supply
Trio Power supply
Uno Power supply
Relay
Signal conditioners
Surge Arrester
Terminal Blocks
UT Screw
PT Push-in Terminal block
ST Spring-cage Terminal block
Feed-through terminal block – UT 35 – 3044225
₫3.50
*Description: Feed-through terminal block, nom. voltage: 1000 V, nominal current: 125 A, connection method: Screw connection, number of connections: 2, cross section: 1.5 mm² – 50 mm², AWG: 16 – 1/0, width: 16 mm, height: 65.1 mm, color: gray, mounting type: NS 35/7,5, NS 35/15
*Country of origin: DE (Germany)
Your advantages
-The flexible options for reducing bridging in the CLIPLINE complete system can be found in “Accessories for the CLIPLINE complete modular terminal block system”
-Easy and time-saving potential supply and distribution of large currents and cross sections up to 35 mm² with reducing bridges
-Tested for railway applications
-The reducing bridges can be used to connect terminal blocks with different connection technologies, e.g., UT 35 screw terminal block with Push-in technology 2,5 Push-in terminal blocks, to form power blocks
General
| Number of levels | 1 |
|---|---|
| Number of connections | 2 |
| Potentials | 1 |
| Nominal cross section | 35 mm² |
| Color | gray |
| Insulating material | PA |
| Flammability rating according to UL 94 | V0 |
| Area of application | Railway industry |
| Machine building | |
| Plant engineering | |
| Process industry | |
| Rated surge voltage | 8 kV |
| Degree of pollution | 3 |
| Overvoltage category | III |
| Insulating material group | I |
| Maximum power dissipation for nominal condition | 4.06 W |
| Designation | Level 1 above 1 below 1 |
| Maximum load current | 150 A (with 50 mm² conductor cross section) |
| Nominal current IN | 125 A |
| Nominal voltage UN | 1000 V |
Dimensions
| Width | 16 mm |
|---|---|
| End cover width | 2.2 mm |
| Length | 61.2 mm |
| Height | 65.1 mm |
| Height NS 35/7,5 | 65.7 mm |
| Height NS 35/15 | 73.2 mm |
Sản phẩm tương tự
-
PHOENIX CONTACT
Chống sét thiết bị – Surge protection device – DT-LAN-CAT.6+ – 2881007
Đọc tiếp*Description: Surge protection in accordance with Class EA (CAT6A), for Gigabit Ethernet (up to 10 Gbps), token ring, FDDI/CDDI, ISDN, and DS1. Suitable for Power over Ethernet (PoE+) “Mode A” and “Mode B”. RJ45 attachment plug with separate grounding cable and ground connection snap-on foot for NS 35 DIN rails.
*Country of origin: DE (Germany)
Your advantages
-Reliable transmission speeds up to 10 Gbps
-Protective adapter for eight signal paths via RJ45 connector
-Suitable for category 6 high-speed data networks
-Can be installed in a control cabinet by removing the ground connection adapter
-
PHOENIX CONTACT
Type 1+2 protective device combination – FLT-SEC-T1+T2-3S-350/25-FM – 2905470
Đọc tiếp*Description: Plug-in lightning and surge arrester combination, in accordance with Type 1+2/Class I+II, for 3-phase power supply networks, with separate N and PE (L1, L2, L3, PE, N).
*Country of origin: DE (Germany)
Your advantages
-Directly coordinated combination of type 1 spark gap without line follow current and type 2 varistor arrester
-Particularly suitable for maximum protection of sensitive devices in harsh environments
-High continuous voltage of 350 V AC for 230/400 V AC networks with high voltage fluctuations
-Pluggable
-Low voltage protection level of 1.5 kV
-Optical, mechanical status indicator
-With floating remote indication contact
-Plugs can be checked with CHECKMASTER 2
-
PHOENIX CONTACT
Type 3 surge protection device – PLT-SEC-T3-3S-230-FM – 2905230
Đọc tiếp*Description: Plug-in device protection, according to type 3/class III, for 3-phase power supply networks with separate N and PE (5-conductor system: L1, L2, L3, N, PE), with integrated surge-proof fuse and remote indication contact.
*Country of origin: DE (Germany)
Your advantages
-Varistor-based device protection
-Can be used without separate backup fuse thanks to integrated overcurrent protection
-For multi-phase power supply units
-Pluggable
-Optical status indicator via LED
-With floating remote indication contact
-Plugs can be checked with CHECKMASTER 2
Liên hệ:
Phoenix Contact
ADLINK – Máy tính Công nghiệp
KSS (đầu Cos, phụ kiện KSS)
Đánh giá
Chưa có đánh giá nào.