Categories
Máy tính công nghiệp ADLINK
- PLASTIM
- Uncategorized
KAI SUH SUH
- RJ45 Modular Plug And Plug Cover
- Bushings
- Cable Clamps
- Cable Marker
- Cable Tie
- Fasteners
- Terminal
- Cord End Terminal
- Cord End Terminal (double)
- Male Lug
- Non Insulated Cord End
- Blade Terminal
- Flanged Spade Terminal
- Fully Receptacle
- Hook Terminal
- Insulated Bullet
- Insulated Ring Terminal
- Insulated Ring Terminal Easy Entry
- Insulated Y Terminal
- Insulated Y Terminal Easy Entry
- Pin Terminals
- Ring Terminal
- Y Terminal
- Tubes
- Wire Connectors
- Wrapping Bands
PHOENIX CONTACT
- SCHNEIDER
Phoenix Contact
Feed-through terminal block – ST 35 – 3036178
*Description: Feed-through terminal block, nom. voltage: 1000 V, nominal current: 125 A, connection method: Spring-cage connection, number of connections: 2, cross section: 2.5 mm² – 35 mm², AWG: 14 – 2, width: 16 mm, color: gray, mounting type: NS 35/7,5, NS 35/15
*Country of origin: PL (Poland)
Your advantages
-The double bridge shaft not only enables individual chain bridging, but also reducing bridging to spring-cage terminal blocks with smaller cross sections
-The flexible options for reducing bridging in the CLIPLINE complete system can be found in “Accessories for the CLIPLINE complete modular terminal block system”
General
Rated surge voltage | 8 kV |
---|
Maximum power dissipation for nominal condition | 4.06 W |
---|---|
Maximum load current | 125 A (with 35 mm² conductor cross section) |
Nominal current IN | 125 A |
Nominal voltage UN | 1000 V |
Sản phẩm tương tự
-
PHOENIX CONTACT
Chống sét thiết bị – Surge protection device – DT-LAN-CAT.6+ – 2881007
Đọc tiếp*Description: Surge protection in accordance with Class EA (CAT6A), for Gigabit Ethernet (up to 10 Gbps), token ring, FDDI/CDDI, ISDN, and DS1. Suitable for Power over Ethernet (PoE+) “Mode A” and “Mode B”. RJ45 attachment plug with separate grounding cable and ground connection snap-on foot for NS 35 DIN rails.
*Country of origin: DE (Germany)
Your advantages
-Reliable transmission speeds up to 10 Gbps
-Protective adapter for eight signal paths via RJ45 connector
-Suitable for category 6 high-speed data networks
-Can be installed in a control cabinet by removing the ground connection adapter
-
PHOENIX CONTACT
Type 3 surge protection device – PLT-SEC-T3-3S-230-FM – 2905230
Đọc tiếp*Description: Plug-in device protection, according to type 3/class III, for 3-phase power supply networks with separate N and PE (5-conductor system: L1, L2, L3, N, PE), with integrated surge-proof fuse and remote indication contact.
*Country of origin: DE (Germany)
Your advantages
-Varistor-based device protection
-Can be used without separate backup fuse thanks to integrated overcurrent protection
-For multi-phase power supply units
-Pluggable
-Optical status indicator via LED
-With floating remote indication contact
-Plugs can be checked with CHECKMASTER 2

Giỏ hàng
Liên hệ:
Phoenix Contact
Mr Khánh – 0326 32 33 22
Mr Kha – 0879 296 759
Mr Trường – 0902 853 421
Mr Vương – 0916 827 412
ADLINK – Máy tính Công nghiệp
Mr Nguyên – 0964 044 518
Sale ADMIN
Ms Ngân – 0785 503 824
Đánh giá
Chưa có đánh giá nào.