Categories
Máy tính công nghiệp ADLINK
PLASTIM
KAI SUH SUH
Cable Clips
Caps
Communication Connectors
Conduits
PCB Parts
Plastic Screws
RJ45 Modular Plug And Plug Cover
Value Pack
Wiring Ducts
Bushings
Cable Clamps
Cable Gland
Cable Marker
Cable Tie
Fasteners
Terminal
Cord End Terminal
Cord End Terminal (double)
Female Lug
Male Lug
- Non Insulated Cord End
- Wire Connector/Nut
- Blade Terminal
- Flanged Spade Terminal
- Fully Receptacle
- Hook Terminal
- Insulated Bullet
- Insulated Ring Terminal
- Insulated Ring Terminal Easy Entry
- Insulated Y Terminal
- Insulated Y Terminal Easy Entry
- Pin Terminals
- Ring Terminal
- Y Terminal
Tubes
Wire Connectors
Wrapping Bands
PHOENIX CONTACT
AUTOMATE
CONNECT
Cables and lines for signals, data, and power
Connectors for device connection and field cabling
Distribution blocks for load and control current distribution
Distributors, adapters, and conductor connectors for reliable signal, data, and power cabling
Electronics housings for the DIN rail and for field applications
Accessories and HMI components for electronics housings
Customer-specific electronics housings
Development kits for electronics housings
DIN rail housings for control cabinet applications
BC modular electronics housings for building automation
EH basic electronics housings for universal applications
Electronics housings for Raspberry Pi applications
ICS modular electronics housings for IoT applications
ME MAX modular electronics housings in a flexible modular design
ME modular electronics housings in an easy-to-install cup shape
ME-IO multifunctional electronics housings with modular front connection technology
ME-PLC multifunctional housings for controllers
UM-ALU extruded profile housings for high EMC
UM-BASIC extruded profile housings for custom PCB sizes
UM-PRO extruded profile housings for high temperature resistance
Field housings for outdoor use
FINEPITCH board-to-board connectors for the connection of PCBs within the device
PCB terminal blocks and PCB connectors
Plug-in test systems for protection technology and control engineering
System cabling for controllers
Terminal Blocks
Disconnect and knife-disconnect terminal blocks
- End Cover
Feed-through terminal blocks, multi-conductor terminal blocks, and multi-level terminal blocks
Fuse terminal blocks, component terminal blocks, and diode terminal blocks
High-current terminal blocks
Hybrid terminal blocks
Installation terminal blocks
Marshaling panels
Marshalling patchboards
Micro and miniature terminal blocks
Plug-in terminal blocks
Sensor terminal blocks and actuator terminal block
UT Screw
- UK Universal
- TB Screw
PT Push-in Terminal block
ST Spring-cage Terminal block
QT Fast
RT Bolt
- SK Shield
MARK, ASSEMBLE, AND INSTALL
Automatic tools
Control cabinet accessories
Crimp connectors
Ferrules
Hand tools for industry and manual work
Industrial lighting and signal technology
Junction boxes and empty enclosures
Marking material for industrial identification
Printers
Software for control cabinet building
Worker assistance systems
SUPPLY, CHARGE, AND PROTECT
CHARX – Charging technology for e-mobility
DC/DC converters and DC/AC inverters
Device circuit breakers
EMC filters for a reliable power supply
Power distributors: The system with integrated busbar for your control cabinet
Protective relays for mains protection
Redundancy modules
Surge protection and lightning protection
Uninterruptible power supplies (UPS)
Power Supply
SWITCH, MEASURE AND MONITOR
TERMINAL BLOCK
Accessories
- SCHNEIDER
Phoenix Contact
ETX-BT
ETX Module with Intel Atom® Processor E3800 Series SoC (formerly codename: Bay Trail)
Datasheet: Download
Key Features
- Intel Atom® E3800 Series SoC and Celeron® N2930/J1900 Processor
- Up to 8 GB non-ECC DDR3L at 1333 MHz
- Dual channel 24-bit LVDS and VGA
- 2x SATA or 2x PATA (Master only), 4x USB 2.0, 10/100 Mbps LAN (GbE via onboard connector)
- Extreme Rugged operating temperature: -40° to +85° (opt.)
- Supports Smart Embedded Management Agent (SEMA) functions
Introduction
The ETX-BT is based on the latest Intel Atom® processor E3800 SoC series, adopting the latest 22nm process technology with 3-D Tri-Gate transistors featuring significant improvements in computational performance and energy efficiency. The E3800 SOC series integrates processor and GPU cores and all I/O on a single chip. Processor performance is scalable from a single-core Intel Atom® processor E3815 at 1.4GHz to a quad-core Intel Atom® processor E3845 at 1.9GHz. Two quad-core Intel® Celeron® processors, based on the same microarchitecture, are also available.
The module supports a single SODIMM for up to 8GB of DDR3L system memory and comes with integrated support for high resolution VGA and single/dual channel LVDS. Optionally, a third display can be connected through an onboard flat cable connector. The ETX-BT’s graphics core supporting two independent displays easily outperforms earlier ETX module generations. ETX-BT standard build supports one SATA and one PATA but special build can support up to 2 SATA or up to two PATA. It further supports, ISA-bus, PCI-bus, serial/parallel ports and Intel based 10/100Mbps LAN. As a way to migrate away from legacy PATA flash devices, the module offers an optional soldered SATA-based SSD with a capacity of 2 to 64 GB.
Ordering information
-
ETX-BT-E3845ETX® module with Intel Atom® E3845 at 1.91 GHz
-
ETX-BT-E3805ETX® Module with Intel Atom® E3805 1.33 GHz 3W
-
ETX-BT-E3827ETX® module with Intel Atom® E3827 at 1.75 GHz
-
ETX-BT-E3826ETX® module with Intel Atom® E3826 at 1.46 GHz
-
ETX-BT-E3825ETX® module with Intel Atom® E3825 at 1.33 GHz
-
ETX-BT-E3815ETX® module with Intel Atom® E3815 at 1.46 GHz
-
ETX-BT-J1900ETX® module with Intel® Celeron® J1900 at 2.00 G
-
ETX-BT-N2930ETX® module with Intel® Celeron® N2930 at 1.83 GHz
-
HTS-eBT-BHeatspreader for ETX-BT with threaded standoffs for bottom mounting
-
HTS-eBT-BTHeatspreader for ETX-BT with through-hole standoffs for top mounting
-
THS-eBT-BLLow profile heatsink for ETX-BT with threaded standoffs for bottom mounting
-
THS-eBT-BTLLow profile heatsink for ETX-BT with through-hole standoffs for top mounting
-
THSF-eBT-BHigh profile heatsink for ETX-BT with threaded standoffs for bottom mounting
Sản phẩm tương tự
Giỏ hàng
Liên hệ:
Phoenix Contact
ADLINK – Máy tính Công nghiệp
KSS (đầu Cos, phụ kiện KSS)
Đánh giá
Chưa có đánh giá nào.