*Description: Ethernet switch, 8 TP RJ45 ports, automatic detection of data transmission speed of 10/100 Mbps (RJ45), autocrossing function
*Country of origin: TW (Taiwan)
-Auto negotiation and autocrossing detection simplifies installation and setup
-Local diagnostic indicators with LEDs
-RJ45 ports support a transmission speed of 10/100 Mbps
| Utilization restriction | EMC: class A product, see manufact |
|---|
| Width | 50 mm |
|---|---|
| Height | 110 mm |
| Depth | 70 mm |
| Degree of protection | IP20 |
|---|---|
| Ambient temperature (operation) | -10 °C … 60 °C |
| Ambient temperature (storage/transport) | -20 °C … 85 °C |
| Permissible humidity (operation) | 5 % … 95 % (non-condensing) |
| Permissible humidity (storage/transport) | 5 % … 95 % (non-condensing) |
| Air pressure (operation) | 86 kPa … 108 kPa (up to 1500 m above sea level) |
| Interface | Ethernet (RJ45) |
|---|---|
| No. of ports | 8 (RJ45 ports) |
| Note on the connection method | Auto negotiation and autocrossing |
| Transmission physics | Ethernet in RJ45 twisted pair |
| Transmission speed | 10/100 Mbps |
| Transmission length | 100 m (per segment) |
| Signal LEDs | Data receive, link status |
| Basic functions | Unmanaged switch / auto negotiation, complies with IEEE 802.3, store and forward switching mode |
|---|---|
| Additional functions | Autonegotiation |
| MAC address table | 2k |
| Status and diagnostic indicators | LEDs: US, link and activity per port |
| Supply voltage | 24 V DC |
|---|---|
| Residual ripple | 3.6 VPP (within the permitted voltage range) |
| Supply voltage range | 9 V DC … 32 V DC |
| Typical current consumption | 140 mA (at US = 24 V DC) |
| Max. current consumption | 380 mA (@9 V DC) |
| Mounting type | DIN rail |
|---|---|
| Type AX | Block design |
| Net weight | 385 g |
| Housing material | Aluminum |
| MTTF | 254.9 Years (MIL-HDBK-217F standard, temperature 25°C, operating cycle 100%) |
