Categories
Máy tính công nghiệp ADLINK
PLASTIM
KAI SUH SUH
- RJ45 Modular Plug And Plug Cover
- Bushings
- Cable Clamps
- Cable Marker
- Cable Tie
- Fasteners
- Terminal
- Cord End Terminal
- Cord End Terminal (double)
- Male Lug
- Non Insulated Cord End
- Blade Terminal
- Flanged Spade Terminal
- Fully Receptacle
- Hook Terminal
- Insulated Bullet
- Insulated Ring Terminal
- Insulated Ring Terminal Easy Entry
- Insulated Y Terminal
- Insulated Y Terminal Easy Entry
- Pin Terminals
- Ring Terminal
- Y Terminal
- Tubes
- Wire Connectors
- Wrapping Bands
PHOENIX CONTACT
- SCHNEIDER
AdvancedTCA
AdvancedTCA Platform
CompactPCI, PC/104, VPX SBCs
CompactPCI/PlusIO/Serial
Computer-On-Modules
GPU & Edge AI
Industrial Motherboards & SBCs
ATX Motherboards
Industrial PCs, Fanless Embedded PCs
Expandable Fanless Embedded PCs
Medically Certified Products
Motion, Machine Vision, Fieldbus
Motion Control
Panel PCs & HMIs
Rugged SFF Platforms & Servers
TERMINAL BLOCK
Accessories
PCB connectors
Tool
Ethernet Switch
SFNB Switch
MCR Technology- MINI MCR
Power Supply
STEP Power supply- Kích thước nhỏ gọn và hiệu quả
Essential Series
Quint Power supply
Trio Power supply
Uno Power supply
Relay
Signal conditioners
Surge Arrester
Terminal Blocks
UT Screw
PT Push-in Terminal block
ST Spring-cage Terminal block
ECAT-TRG4
4-channel high speed position comparison and trigger module
Datasheet: Download
Key Features
- 4 table trigger—10 Mhz max w/ FIFO 255 points
- 4 linear trigger—10 Mhz max.
- 4 channel latch response—3 MHz max. w/ 255 points
- Hardware emergency stop interface
- Supports gantry function up to 32 sets with master
- Power-off memory for axis parameter
- Supports encoder re-driver function
- Supports advanced point table
Introduction
The ECAT-TRG4 is EtherCAT slave module with high-speed position comparison trigger and encoder single redriver function, helping machine and equipment builders to use multiple triggers simultaneously for AOI, glue dispensing, display tests, and storage assembly applications.
Ordering Information
-
ECAT-TRG44-channel high speed position comparison and trigger module
-
ECAT-4XMO4-channel motion control and high-speed trigger and module for the bridge connected to EtherCAT
Sản phẩm tương tự
-
EtherCAT/EtherNET Solution
EPS Series
Đọc tiếpEtherCAT Slave System
Key Features
- Compatible with certified 3rd party EtherCAT masters
- Comprehensive slave modules include high-density digital I/ O, analog I/O, thermal measurement, and motion control
- EtherCAT COE, FOE protocol support
- Compliance with industrial IEC standard
- Automatic Detection System by LinkMasterPro™ application detects and generates corresponding ESI files automatically
- Intelligent status monitoring for EPS modules
- Hot-swappable to reduce MTTR
- Operable in environments from -20°C to 60°C
-
EtherCAT/EtherNET Solution
Talos-3012
Đọc tiếpIntel® Atom™ Processor E3845 1.9 GHz-based EtherCAT Master Controller
Datasheet: Download
Key Features
- Powered by ADLINK Softmotion
- Supports IEC-61131-3-compliant programming environment
- Minimal control cycle time within 250 µs
- Motion control of up to 64 axes and up to 10,000 I/O points of control
- Supports EtherCAT COE, FOE as well as EOE protocols
- Code executable when host Windows system crashed
- Built-in SD socket for logging manufacturing data
- 3 user-defined indicators for CTR diagnostic
-
Motion Control
PCIe-8332
Đọc tiếp16-axis PCIe EtherCAT Master Motion Controller
Datasheet: Download
Key Features
- PCI Express® x 1 compliant
- Up to 16-axis motion control & 10,000 I/O point control
- EtherCAT cycle times up to 250μs
- Broad range of compatible EtherCAT slaves
- Dedicated emergency stop input
- 4CH isolated digital input/4CH isolated digital output
- 1CH pulsar input
- Point-table functions for contouring application
Đặt mua ECAT-TRG4
ECAT-TRG4
Liên hệ:
Phoenix Contact
ADLINK – Máy tính Công nghiệp
KSS (đầu Cos, phụ kiện KSS)
Đánh giá
Chưa có đánh giá nào.