Categories
Máy tính công nghiệp ADLINK
- PLASTIM
- Uncategorized
KAI SUH SUH
- RJ45 Modular Plug And Plug Cover
- Bushings
- Cable Clamps
- Cable Marker
- Cable Tie
- Fasteners
- Terminal
- Cord End Terminal
- Cord End Terminal (double)
- Male Lug
- Non Insulated Cord End
- Blade Terminal
- Flanged Spade Terminal
- Fully Receptacle
- Hook Terminal
- Insulated Bullet
- Insulated Ring Terminal
- Insulated Ring Terminal Easy Entry
- Insulated Y Terminal
- Insulated Y Terminal Easy Entry
- Pin Terminals
- Ring Terminal
- Y Terminal
- Tubes
- Wire Connectors
- Wrapping Bands
PHOENIX CONTACT
- SCHNEIDER
Phoenix Contact
Bộ Nguồn QUINT-PS/24DC/24DC/10 – 2320092
- Mã sản phẩm: 2320092
- Tên sản phẩm: Bộ Nguồn – QUINT-PS/24DC/24DC/10
- Hãng sản xuất: Phoenix Contact
- Mô tả: Bộ nguồn QUINT đầu vào: 24 V DC, đầu ra: 24 V DC / 10A, mã hàng QUINT-PS/24DC/24DC/ 8 – 2320092, gắn được trên thanh DIN rail với công nghệ độc quyền SFB(ngắt cầu chì chọn lọc)
- Địa chỉ: Số 48 đường số 5 khu đô thị Vạn Phúc, P. Hiệp Bình Phước, Q. Thủ Đức, TP. Hồ Chí Minh, Việt Nam
Hotline: 1900 6697
Email: info@thien-son.com.vn - Luôn đặt lợi ích của khách hàng lên hàng đầu, giữ vững đạo đức trong kinh doanh. “Lợi ích của bạn – thành công của chúng tôi; thành công của bạn – niềm vui của chúng tôi”.
Dimensions
Width | 48 mm |
---|---|
Height | 130 mm |
Depth | 125 mm |
Width with alternative assembly | 122 mm |
Height with alternative assembly | 130 mm |
Depth with alternative assembly | 51 mm |
Ambient conditions
Degree of protection | IP20 |
---|---|
Ambient temperature (operation) | -25 °C … 70 °C (> 60 °C derating, 2.5 %/K, startup at -40°C type-tested) |
Ambient temperature (start-up type tested) | -40 °C |
Ambient temperature (storage/transport) | -40 °C … 85 °C |
Max. permissible relative humidity (operation) | ≤ 95 % (at 25 °C, non-condensing) |
Climatic class | 3K3 (in acc. with EN 60721) |
Degree of pollution | 2 |
Input data
Nominal input voltage range | 24 V DC |
---|---|
Input voltage range | 18 V DC … 32 V DC |
Extended input voltage range in operation | 14 V DC … 18 V DC (Derating) |
Current consumption | 14 A (24 V, IBOOST) |
Inrush current | < 15 A (typical) |
Mains buffering time | > 12 ms (24 V DC) |
Input fuse | 25 A (internal (device protection)) |
Recommended breaker for input protection | 16 A … 20 A (Characteristics B, C, D, K) |
Type of protection | Transient surge protection |
Protective circuit/component | Varistor |
Output data
Nominal output voltage | 24 V DC ±1 % |
---|---|
Setting range of the output voltage (USet) | 18 V DC … 29.5 V DC (> 24 V DC, constant capacity restricted) |
Nominal output current (IN) | 10 A (-25 °C … 60 °C) |
POWER BOOST (IBoost) | 12.5 A (-25°C … 40°C permanent, UOUT = 24 V DC ) |
Selective Fuse Breaking (ISFB) | 60 A (12 ms) |
Derating | 60 °C … 70 °C (2.5%/K) |
Connection in parallel | Yes, for redundancy and increased capacity |
Connection in series | yes |
Feedback voltage resistance | 35 V DC |
Protection against overvoltage at the output (OVP) | < 35 V DC |
Max. capacitive load | unlimited |
Active current limitation | Approx. 18 A |
Control deviation | < 1 % (change in load, static 10 % … 90 %) |
< 2 % (change in load, dynamic 10 % … 90 %) | |
< 0.1 % (change in input voltage ±10 %) | |
Residual ripple | < 20 mVPP |
Peak switching voltages nominal load | < 10 mVPP (20 MHz) |
Maximum power dissipation in no-load condition | 1.6 W |
Power loss nominal load max. | 24 W |
Sản phẩm tương tự
-
PHOENIX CONTACT
Female test connector – PSB 3/10/4 – 0601292
Đọc tiếp*Description: Female test connector, color: silver
*Country of origin: PL (Poland)
Your advantages
-Test sockets PSB … are used for a reliable test connection
-With PSB 6/5/6, the test plug with a 4 mm diameter is used
-All test sockets are screwed into the bridge shaft
-
PHOENIX CONTACT
Installation terminal block – UIK 35 – 3006182
Đọc tiếp*Description: Installation terminal block, Screw connection, cross section: 0.75 mm² – 35 mm², AWG: 18 – 2, width: 15.2 mm, color: gray, mounting type: NS 35/7,5, NS 35/15, NS 32
*Country of origin: CN (China)
Your advantages
Your advantages
-Installation terminal blocks with a particularly low-profile design for use in flat distributors
-The asymmetrical arrangement of the terminal blocks on the DIN rail enables the neutral busbar to be routed past the terminal blocks
-
PHOENIX CONTACT
End clamp – E/UK – 1201442
₫0.80Mua hàng*Description: End clamp, width: 9.5 mm, height: 35.3 mm, material: PA, length: 50.5 mm, Mounting on a DIN rail NS 32 or NS 35, color: gray
*Country of origin: IN (India)
Your advantages
-With universal foot for NS 35 and NS 32 DIN rails
-Tall and low-profile designs
-Large-surface labeling

Giỏ hàng
Liên hệ:
Phoenix Contact
ADLINK – Máy tính Công nghiệp
KSS (đầu Cos, phụ kiện KSS)
Đánh giá
Chưa có đánh giá nào.