Current transducers - MCR-SL-S-100-I-LP

Current transducers – MCR-SL-S-100-I-LP – 2813486

*Description: MCR current measuring transducer, for measuring sinusoidal and non-sinusoidal alternating currents, input current 0…100 A, loop-powered output with 4…20 mA

*Country of origin: JP (Japan)

Your advantages

-Can be retrofitted with open-up Rogowski coil

-Loop-powered

-30 … 6000 Hz true r.m.s. value measurement

-Measuring range selection via slide switch

Dimensions

Width	55 mm
Height	85 mm
Depth	70.5 mm
Primary round conductor (diameter)	18.5 mm

Ambient conditions

Ambient temperature (operation)	-20 °C … 60 °C
Ambient temperature (storage/transport)	-40 °C … 85 °C
Degree of protection	IP20

Input data

Input	Current measuring input
Input current range	0 A … 100 A (0 … 50/75/100 A)
Operate threshold	1 % (of final value)
Setting range for min. input current	0 A … 50 A
Setting range for max. input current	0 A … 100 A
Overload capacity	Depending on laid conductor
Surge strength	Depending on through connected conductor
Frequency measuring range	30 Hz … 6000 Hz

Output data

Output name	Current output
Current output signal	4 mA … 20 mA
Max. output current	< 25 mA
Load/output load current output	(U_B – 12 V) x 350 / 12 A

Power supply

Supply voltage range	12 V DC … 24 V DC

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “Current transducers – MCR-SL-S-100-I-LP – 2813486”

Sản phẩm tương tự

PHOENIX CONTACT

Switching jumper – SB 4-RTK/S – 0311265

Quick view

*Description: Switching jumper, pitch: 8.2 mm, number of positions: 4, color: silver

*Country of origin: PL (Poland)

Đọc tiếp

PHOENIX CONTACT

Chống sét thiết bị – Surge protection device – DT-LAN-CAT.6+ – 2881007

Quick view

*Description: Surge protection in accordance with Class E_A (CAT6_A), for Gigabit Ethernet (up to 10 Gbps), token ring, FDDI/CDDI, ISDN, and DS1. Suitable for Power over Ethernet (PoE+) “Mode A” and “Mode B”. RJ45 attachment plug with separate grounding cable and ground connection snap-on foot for NS 35 DIN rails.

*Country of origin: DE (Germany)

Your advantages

-Reliable transmission speeds up to 10 Gbps

-Protective adapter for eight signal paths via RJ45 connector

-Suitable for category 6 high-speed data networks

-Can be installed in a control cabinet by removing the ground connection adapter

Đọc tiếp

PHOENIX CONTACT

Feed-through terminal block – UK 16 N – 3006043

Quick view

₫1.85

*Description: Feed-through terminal block, nom. voltage: 800 V, nominal current: 76 A, connection method: Screw connection, number of connections: 2, cross section: 2.5 mm² – 25 mm², AWG: 14 – 4, width: 12.2 mm, color: gray, mounting type: NS 35/7,5, NS 35/15, NS 32

*Country of origin: CN (China)