Current transducers – MCR-S-1/5-UI-DCI-NC – 2814715

*Description: MCR current transducer, programmable and configurable, for measuring direct, alternating and distorted currents, input current 0…0.2 to 0…11 A, unconfigured

*Country of origin: DE (Germany)

Your advantages

-True r.m.s. value measurement

-Device can be set via DIP switches or MCR/PI-CONF-WIN configuration software

-3-way isolation

Mua ngay Gọi điện xác nhận và giao hàng tận nơi

Danh mục: PHOENIX CONTACT, Signal conditioners

Mô tả
Đánh giá (0)

Dimensions

Width	22.5 mm
Height	99 mm
Depth	114.5 mm

Ambient conditions

Ambient temperature (operation)	-20 °C … 60 °C
Ambient temperature (storage/transport)	-40 °C … 85 °C
Maximum altitude	< 2000 m
Degree of protection	IP20
Noise immunity	EN 61000-6-2

Input data

Input	Current measuring input
Number of inputs	3
Configurable/programmable	Yes, unconfigured
Input current range	0 A … 11 A (AC/DC)
Operate threshold	2 % (of measuring range nominal value 1/5/10 A)
Setting range for min. input current	0 A … 200 mA
Setting range for max. input current	0 A … 11 A
Impulse form	AC, DC or distorted currents
Overload capacity	2 x I_{N (}continuous)
Surge strength	20 x I_N (1 s)
Frequency measuring range	15 Hz … 400 Hz
Connection method	Screw connection

Output data

Output name	Voltage output / current output
Configurable/programmable	Yes, unconfigured
Voltage output signal	0 V … 10 V
	2 V … 10 V
	-10 V … 10 V
	0 V … 5 V
	1 V … 5 V
	-5 V … 5 V
	10 V … 0 V
	10 V … 2 V
	10 V … -10 V
	5 V … 0 V
	5 V … 1 V
	5 V … -5 V
Current output signal	0 mA … 20 mA
	4 mA … 20 mA
	20 mA … 0 mA
	20 mA … 4 mA
Load/output load voltage output	> 10 kΩ
Load/output load current output	< 500 Ω

Power supply

Supply voltage range	20 V DC … 30 V DC
Max. current consumption	< 40 mA (without load)

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “Current transducers – MCR-S-1/5-UI-DCI-NC – 2814715”

Sản phẩm tương tự

PHOENIX CONTACT
Installation terminal block – UIK 35 – 3006182

Quick view

*Description: Installation terminal block, Screw connection, cross section: 0.75 mm² – 35 mm², AWG: 18 – 2, width: 15.2 mm, color: gray, mounting type: NS 35/7,5, NS 35/15, NS 32

*Country of origin: CN (China)

Your advantages

Your advantages

-Installation terminal blocks with a particularly low-profile design for use in flat distributors

-The asymmetrical arrangement of the terminal blocks on the DIN rail enables the neutral busbar to be routed past the terminal blocks

Đọc tiếp
PHOENIX CONTACT
Plug-in bridge – FBS 10-5 – 3030213

Quick view

₫2.28

*Description: Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 50.6 mm, number of positions: 10, color: red

*Country of origin: DE (Germany)

Your advantages

-The 2- to 50-pos. jumpers can bridge up to 50 terminal blocks in the two bridge shafts of the CLIPLINE complete system in one step

Mua hàng
PHOENIX CONTACT
Surge protection device – D-UFB-V24/S-DSUB 9/SB-B – 2762773

Quick view

*Description: Attachment plug with surge voltage fine protection for V.24 interface. Connection: D-SUB-9 male/female plug, for installation in lines

*Country of origin: DE (Germany)

Đọc tiếp
PHOENIX CONTACT
End cover – D-UT 16 – 3047206

Quick view

₫0.80

*Description:End cover, length: 52.8 mm, width: 2.2 mm, height: 47.3 mm, color: gray

*Country of origin: DE (Germany)

Mua hàng