Categories
Máy tính công nghiệp ADLINK
PLASTIM
KAI SUH SUH
Cable Clips
Caps
Communication Connectors
Conduits
PCB Parts
Plastic Screws
RJ45 Modular Plug And Plug Cover
Value Pack
Wiring Ducts
Bushings
Cable Clamps
Cable Gland
Cable Marker
Cable Tie
Fasteners
Terminal
Cord End Terminal
Cord End Terminal (double)
Female Lug
Male Lug
- Non Insulated Cord End
- Wire Connector/Nut
- Blade Terminal
- Flanged Spade Terminal
- Fully Receptacle
- Hook Terminal
- Insulated Bullet
- Insulated Ring Terminal
- Insulated Ring Terminal Easy Entry
- Insulated Y Terminal
- Insulated Y Terminal Easy Entry
- Pin Terminals
- Ring Terminal
- Y Terminal
Tubes
Wire Connectors
Wrapping Bands
PHOENIX CONTACT
AUTOMATE
CONNECT
Cables and lines for signals, data, and power
Connectors for device connection and field cabling
Distribution blocks for load and control current distribution
Distributors, adapters, and conductor connectors for reliable signal, data, and power cabling
Electronics housings for the DIN rail and for field applications
Accessories and HMI components for electronics housings
Customer-specific electronics housings
Development kits for electronics housings
DIN rail housings for control cabinet applications
BC modular electronics housings for building automation
EH basic electronics housings for universal applications
Electronics housings for Raspberry Pi applications
ICS modular electronics housings for IoT applications
ME MAX modular electronics housings in a flexible modular design
ME modular electronics housings in an easy-to-install cup shape
ME-IO multifunctional electronics housings with modular front connection technology
ME-PLC multifunctional housings for controllers
UM-ALU extruded profile housings for high EMC
UM-BASIC extruded profile housings for custom PCB sizes
UM-PRO extruded profile housings for high temperature resistance
Field housings for outdoor use
FINEPITCH board-to-board connectors for the connection of PCBs within the device
PCB terminal blocks and PCB connectors
Plug-in test systems for protection technology and control engineering
System cabling for controllers
Terminal Blocks
Disconnect and knife-disconnect terminal blocks
- End Cover
Feed-through terminal blocks, multi-conductor terminal blocks, and multi-level terminal blocks
Fuse terminal blocks, component terminal blocks, and diode terminal blocks
High-current terminal blocks
Hybrid terminal blocks
Installation terminal blocks
Marshaling panels
Marshalling patchboards
Micro and miniature terminal blocks
Plug-in terminal blocks
Sensor terminal blocks and actuator terminal block
UT Screw
- UK Universal
- TB Screw
PT Push-in Terminal block
ST Spring-cage Terminal block
QT Fast
RT Bolt
- SK Shield
MARK, ASSEMBLE, AND INSTALL
Automatic tools
Control cabinet accessories
Crimp connectors
Ferrules
Hand tools for industry and manual work
Industrial lighting and signal technology
Junction boxes and empty enclosures
Marking material for industrial identification
Printers
Software for control cabinet building
Worker assistance systems
SUPPLY, CHARGE, AND PROTECT
CHARX – Charging technology for e-mobility
DC/DC converters and DC/AC inverters
Device circuit breakers
EMC filters for a reliable power supply
Power distributors: The system with integrated busbar for your control cabinet
Protective relays for mains protection
Redundancy modules
Surge protection and lightning protection
Uninterruptible power supplies (UPS)
Power Supply
SWITCH, MEASURE AND MONITOR
TERMINAL BLOCK
Accessories
- SCHNEIDER
Phoenix Contact
cPCIS-3320/AC
9U Dual System CompactPCI® Chassis with Redundant Power Supplies
Datasheet: Download
Key Features
- Standard 6U CompactPCI® and PICMG® 2.5 H.110 CT Bus for all peripheral slots
- PICMG® 2.1 Hot Swap compliant 64-bit CompactPCI® backplane with P3 & P5 rear I/O
- Dual cPCI segments (System A: 1 + 7 slots, System B: 1 + 4 slots)
- 3+1 (750 W + 250 W) hot swappable redundant power supplies with universal AC input
- Redundant cooling architecture
- Magnetic circuit breaker protection for AC input
Introduction
The cPCIS-3320 Series 9U Dual-System Platform is ideal for developing telecom applications focusing on media and signaling gateways, as well as telecom value-added services like Location Based Service (LBS), Ring Back Tone (RBT), and Multimedia Message Systems (MMS).
This flexible and reliable development platform with optimized I/O and storage provides the best solution for equipment manufacturers and system integrators and shortens time-to-market for fast growing business revenues.
The cPCIS-3320 supports dual systems and two 5.25″ drive bays. System A (left side) supports 1+7 slots (1 host slot + 7 peripheral slots), and System B (right side) supports 1+4 slots (1 host slot and 4 peripheral slots). Both segments support 64-bit/66MHz PCI and H.110 CT buses.
Ordering infomation
-
cPCIS-3320/AC/CMM9U 64-bit/66MHz CompactPCI® Dual System with AC input AT PSU (4x 250W) & CMM slot
-
cPCIS-3320/AC9U 64-bit/66MHz CompactPCI® Dual System with AC input AT PSU (4x 250W) & Basic Alarm Board
Sản phẩm tương tự
-
CompactPCI/PlusIO/Serial
cPCI-3511(BL) Series
Đọc tiếp3U CompactPCI PlusIO 4th/5th Generation Intel® Core™ i7 Processor Blade with ECCDatasheet: DownloadKey Features- Quad-core 4th/5th Generation Intel® Core™ i7 processor
- Up to 8GB DDR3L ECC soldered memory onboard (16GB for cPCI-3511BL)
- System/Peripheral slot operation
- PICMG 2.30 CompactPCI PlusIO compliant
- Intel® AMT 9.0 support
-
CompactPCI/PlusIO/Serial
cPCIS-6230R/ 6240R Series
Đọc tiếp2U Rackmount Chassis with 1U ATX Power Supply
Datasheet: Download
Key Features- 19″ rackmount, 2U height for 6U cPCI boards with 80 mm rear I/O
- Suitable for one dual-slot system module (cPCIS-6230R Series) or one single-slot system board with three expansion boards (cPCIS-6240R Series)
- Standard 6U CompactPCI® and optional PICMG® 2.5 H.110 CT Bus
- PICMG® 2.1 Hot Swap compliant 32-bit/64-bit 3-slot/4-slot CompactPCI® backplane with P3 & P5 rear I/O
- Built-in 300 W AC input 1U ATX power supply
- Built-in slim type optical drive
-
CompactPCI/PlusIO/Serial
cPCI-3548
Đọc tiếp3U CompactPCI 8-port serial communication module
Key Features
- Supports 32-bit/33MHz CompactPCI bus
- 16C550A compatible serial communication controller
- Eight RS-232/422/485 asynchronous communications ports with intelligent buffer
- 2500 VDC signal to ground isolation voltage
- Auto-flow control; change mode by dip switch
- Plug-and-play, IRQ & I/O address automatically assigned by PCI BIOS, shared IRQ
- Surge protectors; rugged DB-62 connector
-
CompactPCI/PlusIO/Serial
cPCIS-6235R
Đọc tiếp2U Rackmount Chassis with Dual AC-Input Mini Redundant Power Supplies
Datasheet:
Features
● 19” Rackmount, 2U height for 6U cPCI boards with 80 mm rear I/O
● Standard 6U CompactPCI®
and PICMG®
2.5 H.110 CT Bus
● PICMG®
2.1 Hot Swap compliant 32/64-bit 3-slot CompactPCI®
backplane with P3 & P5 rear I/O
● Built-in 300 W + 300 W Dual AC-input mini redundant power
supply units
● LED indicators for power status, fan status, temperature alarm
Giỏ hàng
Liên hệ:
Phoenix Contact
ADLINK – Máy tính Công nghiệp
KSS (đầu Cos, phụ kiện KSS)
Đánh giá
Chưa có đánh giá nào.