Categories
- Máy tính công nghiệp ADLINK
- PLASTIM
- KAI SUH SUH
- Cable Clips
- Caps
- Communication Connectors
- Conduits
- PCB Parts
- Plastic Screws
- RJ45 Modular Plug And Plug Cover
- Value Pack
- Wiring Ducts
- Bushings
- Cable Clamps
- Cable Gland
- Cable Marker
- Cable Tie
- Fasteners
- Terminal
- Cord End Terminal
- Cord End Terminal (double)
- Female Lug
- Male Lug
- Non Insulated Cord End
- Wire Connector/Nut
- Blade Terminal
- Flanged Spade Terminal
- Fully Receptacle
- Hook Terminal
- Insulated Bullet
- Insulated Ring Terminal
- Insulated Ring Terminal Easy Entry
- Insulated Y Terminal
- Insulated Y Terminal Easy Entry
- Pin Terminals
- Ring Terminal
- Y Terminal
- Tubes
- Wire Connectors
- Wrapping Bands
- PHOENIX CONTACT
- AUTOMATE
- CONNECT
- Cables and lines for signals, data, and power
- Connectors for device connection and field cabling
- Distribution blocks for load and control current distribution
- Distributors, adapters, and conductor connectors for reliable signal, data, and power cabling
- Electronics housings for the DIN rail and for field applications
- Accessories and HMI components for electronics housings
- Customer-specific electronics housings
- Development kits for electronics housings
- DIN rail housings for control cabinet applications
- BC modular electronics housings for building automation
- EH basic electronics housings for universal applications
- Electronics housings for Raspberry Pi applications
- ICS modular electronics housings for IoT applications
- ME MAX modular electronics housings in a flexible modular design
- ME modular electronics housings in an easy-to-install cup shape
- ME-IO multifunctional electronics housings with modular front connection technology
- ME-PLC multifunctional housings for controllers
- UM-ALU extruded profile housings for high EMC
- UM-BASIC extruded profile housings for custom PCB sizes
- UM-PRO extruded profile housings for high temperature resistance
- Field housings for outdoor use
- FINEPITCH board-to-board connectors for the connection of PCBs within the device
- PCB terminal blocks and PCB connectors
- Plug-in test systems for protection technology and control engineering
- System cabling for controllers
- Terminal Blocks
- Disconnect and knife-disconnect terminal blocks
- End Cover
- Feed-through terminal blocks, multi-conductor terminal blocks, and multi-level terminal blocks
- Fuse terminal blocks, component terminal blocks, and diode terminal blocks
- High-current terminal blocks
- Hybrid terminal blocks
- Installation terminal blocks
- Marshaling panels
- Marshalling patchboards
- Micro and miniature terminal blocks
- Plug-in terminal blocks
- Sensor terminal blocks and actuator terminal block
- UT Screw
- UK Universal
- TB Screw
- PT Push-in Terminal block
- ST Spring-cage Terminal block
- QT Fast
- RT Bolt
- SK Shield
- MARK, ASSEMBLE, AND INSTALL
- Automatic tools
- Control cabinet accessories
- Crimp connectors
- Ferrules
- Hand tools for industry and manual work
- Industrial lighting and signal technology
- Junction boxes and empty enclosures
- Marking material for industrial identification
- Printers
- Software for control cabinet building
- Worker assistance systems
- SUPPLY, CHARGE, AND PROTECT
- CHARX – Charging technology for e-mobility
- DC/DC converters and DC/AC inverters
- Device circuit breakers
- EMC filters for a reliable power supply
- Power distributors: The system with integrated busbar for your control cabinet
- Protective relays for mains protection
- Redundancy modules
- Surge protection and lightning protection
- Uninterruptible power supplies (UPS)
- Power Supply
- SWITCH, MEASURE AND MONITOR
- TERMINAL BLOCK
- Accessories
- SCHNEIDER
Phoenix Contact
cPCI-A3525 Series
3U CompactPCI Serial 9th Gen Intel Xeon®/Core™ i7 Processor Blade
Datasheet: Download
Key Features
- PICMG® CPCI-S.0 CompactPCI® Serial Processor Blade
- 14nm multi-core 9th Gen Intel® processor (formerly Coffee Lake Refresh)
- Graphics engine integrated in processor supporting independent displays with DirectX 12, OpenGL 4.5
- Max. 32GB DDR4-2666 by 2x SODIMM
- Supports 2x PCIe x8 Gen 3 and 2x PCIe x4 Gen 3
- Up to 10x USB 2.0/3.0, up to 7x SATA to rear
- Supports Satellite mode operation as a standalone blade in peripheral slots
Introduction
CompactPCI® Serial (PICMG CPCI-S.0) is a new modular computer standard officially adopted by PICMG in 2011. The CompactPCI Serial standard defines a completely new connector to support high-speed serial interfaces including PCI Express, SATA, USB and Ethernet. A CompactPCI Serial backplane has six high-speed connectors P1 to P6 on the system slot but only P1 is mandatory on peripheral slots, P2 to P6 being optional. A CompactPCI Serial system can comprise a total of nine blades (one system blade and eight peripheral I/O blades) through an Ethernet full mesh or single star architecture. The CompactPCI® Serial standard is the next-generation of the CompactPCI® specification and provides more flexibility and higher speed and bandwidth in modular system solutions.
The ADLINK cPCI-A3525 Series is a 3U CompactPCI Serial compatible processor blade with SO-DIMM DDR4-2666 ECC memory up to 64GB. The ADLINK cPCI-A3525 features a 8th/9th generation Intel® Core™ processor with Mobile Intel® CM246 PCH Chipset.
The cPCI-A3525 Series is a 3U CompactPCI Serial blade available in single-slot (4HP) form factors with optional daughter boards to provide extra storage and with 2 extra GbE port throught P6 to the rear backplane. Faceplate I/O on the single slot (4HP) includes 1x DP, 2x GbE and 2x USB 3.0 ports (these I/O are common to all versions).
Serial interfaces on the backplane connectors P1 to P5 include two PCI Express x8, one PCI Express x2, two PCI Express x4, three PCI Express x1, seven SATA 6Gb/s, two USB 3.0, and eight USB 2.0 ports. Addition- ally, the P6 connector supports two Gigabit Ethernet interfaces.
The cPCI-A3525 is a high-performance solution for transportation, factory automation, defense and other industrial applications that require superior data transfer capability and advanced computing power. The ADLINK cPCI-A3525 provides high manageability, supports Satellite mode operation as a standalone blade in peripheral slots, and Smart Embedded Management Agent (SEMA) for system health monitoring. In addition, with multiple operating system and board support package (BSP) support, users can build a reliable and high-performance industrial system with cPCI-A3525 Series.
Ordering Infomation
-
cPCI-A3525/9850/M16/S1281-slot (4HP) 3U CompactPCI Serial blade with Intel® Core™ i7-9850HL processor and 2x 8GB DDR4-2666 SODIMM, 2x DP, 2x GbE, 2x USB 3.0 and onboard 128GB SSD
-
cPCI-A3525/9850/M161-slot (4HP) 3U CompactPCI Serial blade with Intel® Core™ i7-9850HL processor and 2x 8GB DDR4-2666 SODIMM, 2x DP, 2x GbE and 2x USB 3.0
-
cPCI-A3525/2276/M16/S1281-slot (4HP) 3U CompactPCI Serial blade with Intel® Xeon® E-2276ML processor and 2x 8GB DDR4-2666 SODIMM, 2x DP, 2x GbE, 2x USB 3.0 and onboard 128GB SSD
-
cPCI-A3525/2276/M161-slot (4HP) 3U CompactPCI Serial blade with Intel® Xeon® E-2276ML processor and 2x 8GB DDR4-2666 SODIMM, 2x DP, 2x GbE and 2x USB 3.0
-
DP-DVI cableDisplayPort to DVI adapter cable
-
DP-VGA cableDisplayPort to VGA adapter cable
-
DP-HDMI cableDisplayPort to HDMI adapter cable
-
cPCI-A3H103U CompactPCI Serial 2.5″ SATA storage carrier with hot-swap support, anti-shock and anti-vibration storage kit
-
cPCI-A3X103U CompactPCI Serial XMC module carrier
Sản phẩm tương tự
-
CompactPCI/PlusIO/Serial
cPCI-A3H10
Đọc tiếp3U CompactPCI Serial 2.5″ SATA Storage Carrier
Datasheet: Download
Key Features- 3U 4HP CPCI-S.0 peripheral
- One 2.5″ SATA 6Gb/s drive slot
- Status LEDs on faceplate: drive activity, hot-swap status, user-configurable
- Hot swap support
- Operating temperature: -40°C to 85°C with qualified compon
-
CompactPCI/PlusIO/Serial
cPCIS-ET1100 Series
Đọc tiếp3U Enclosure with 32-bit Backplane and Wide Temperature Range CompactPCI® Redundant Power SupplyDatasheet: DownloadKey Features- 3U CompactPCI® single system, seven peripheral slot configuration
- Equipped with wide temperature range CompactPCI® redundant power supply (Max. output 500 W)
- Suitable for both rackmount and desktop applications
- Comprehensive EMC shielding
- Optional rear I/O configuration (cPCI 50mm depth RTMs)
-
CompactPCI/PlusIO/Serial
cPCI-3548
Đọc tiếp3U CompactPCI 8-port serial communication module
Key Features
- Supports 32-bit/33MHz CompactPCI bus
- 16C550A compatible serial communication controller
- Eight RS-232/422/485 asynchronous communications ports with intelligent buffer
- 2500 VDC signal to ground isolation voltage
- Auto-flow control; change mode by dip switch
- Plug-and-play, IRQ & I/O address automatically assigned by PCI BIOS, shared IRQ
- Surge protectors; rugged DB-62 connector
Giỏ hàng
Liên hệ:
Phoenix Contact
ADLINK – Máy tính Công nghiệp
KSS (đầu Cos, phụ kiện KSS)
Đánh giá
Chưa có đánh giá nào.