Categories
Máy tính công nghiệp ADLINK
PLASTIM
KAI SUH SUH
Cable Clips
Caps
Communication Connectors
Conduits
PCB Parts
Plastic Screws
RJ45 Modular Plug And Plug Cover
Value Pack
Wiring Ducts
Bushings
Cable Clamps
Cable Gland
Cable Marker
Cable Tie
Fasteners
Terminal
Cord End Terminal
Cord End Terminal (double)
Female Lug
Male Lug
- Non Insulated Cord End
- Wire Connector/Nut
- Blade Terminal
- Flanged Spade Terminal
- Fully Receptacle
- Hook Terminal
- Insulated Bullet
- Insulated Ring Terminal
- Insulated Ring Terminal Easy Entry
- Insulated Y Terminal
- Insulated Y Terminal Easy Entry
- Pin Terminals
- Ring Terminal
- Y Terminal
Tubes
Wire Connectors
Wrapping Bands
PHOENIX CONTACT
AUTOMATE
CONNECT
Cables and lines for signals, data, and power
Connectors for device connection and field cabling
Distribution blocks for load and control current distribution
Distributors, adapters, and conductor connectors for reliable signal, data, and power cabling
Electronics housings for the DIN rail and for field applications
Accessories and HMI components for electronics housings
Customer-specific electronics housings
Development kits for electronics housings
DIN rail housings for control cabinet applications
BC modular electronics housings for building automation
EH basic electronics housings for universal applications
Electronics housings for Raspberry Pi applications
ICS modular electronics housings for IoT applications
ME MAX modular electronics housings in a flexible modular design
ME modular electronics housings in an easy-to-install cup shape
ME-IO multifunctional electronics housings with modular front connection technology
ME-PLC multifunctional housings for controllers
UM-ALU extruded profile housings for high EMC
UM-BASIC extruded profile housings for custom PCB sizes
UM-PRO extruded profile housings for high temperature resistance
Field housings for outdoor use
FINEPITCH board-to-board connectors for the connection of PCBs within the device
PCB terminal blocks and PCB connectors
Plug-in test systems for protection technology and control engineering
System cabling for controllers
Terminal Blocks
Disconnect and knife-disconnect terminal blocks
- End Cover
Feed-through terminal blocks, multi-conductor terminal blocks, and multi-level terminal blocks
Fuse terminal blocks, component terminal blocks, and diode terminal blocks
High-current terminal blocks
Hybrid terminal blocks
Installation terminal blocks
Marshaling panels
Marshalling patchboards
Micro and miniature terminal blocks
Plug-in terminal blocks
Sensor terminal blocks and actuator terminal block
UT Screw
- UK Universal
- TB Screw
PT Push-in Terminal block
ST Spring-cage Terminal block
QT Fast
RT Bolt
- SK Shield
MARK, ASSEMBLE, AND INSTALL
Automatic tools
Control cabinet accessories
Crimp connectors
Ferrules
Hand tools for industry and manual work
Industrial lighting and signal technology
Junction boxes and empty enclosures
Marking material for industrial identification
Printers
Software for control cabinet building
Worker assistance systems
SUPPLY, CHARGE, AND PROTECT
CHARX – Charging technology for e-mobility
DC/DC converters and DC/AC inverters
Device circuit breakers
EMC filters for a reliable power supply
Power distributors: The system with integrated busbar for your control cabinet
Protective relays for mains protection
Redundancy modules
Surge protection and lightning protection
Uninterruptible power supplies (UPS)
Power Supply
SWITCH, MEASURE AND MONITOR
TERMINAL BLOCK
Accessories
- SCHNEIDER
Phoenix Contact
cPCI-A3515 Series
3U CompactPCI Serial 4th/5th Generation Intel® Core™ Processor Blade with ECC
Datasheet: Download
Key Features
- PICMG® CPCI-S.0 CompactPCI® Serial Processor Blade
- Quad-core 4th/5th Generation Intel® Core™ i7 processor
- Up to 16GB DDR3L ECC soldered memory
- Up to three independent displays
- Optional extended operating temperature -40°C to +85°C (with Intel® cTDP)
- Optional PICMG® 2.0 (CompactPCI®) support
- Smart Embedded Management Agent (SEMA) for system health monitoring
Introduction
CompactPCI Serial (PICMG CPCI-S.0) is a new modular computer standard officially adopted by PICMG in 2011. The Compact-PCI Serial standard defines a completely new connector to support high-speed serial interfaces including PCI Express, SATA, USB and Ethernet. The mechanical specification is fully compliant with PICMG 2.0 CompactPCI and interoperable with existing CompactPCI systems via hybrid backplanes. A CompactPCI Serial backplane has six high-speed connectors P1 to P6 on the system slot but only P1 is mandatory on peripheral slots, P2 to P6 being optional. A CompactPCI Serial system can comprise a total of nine blades (one system blade and eight peripheral I/O blades) through an Ethernet full mesh or single star architecture. The CompactPCI Serial standard is the next-generation of the CompactPCI specification and provides more flexibility and higher speed and bandwidth in modular system solutions.
The ADLINK cPCI-A3515 Series is a 3U CompactPCI Serial compatible processor blade with soldered DDR3L-1333/1600 ECC memory up to 16GB. The ADLINK cPCI-A3515 features a 4th/5th generation Intel® Core™ processor with Mobile Intel® QM87 Chipset.
The cPCI-A3515 Series is a 3U CompactPCI Serial blade available in single-slot (4HP) or dual-slot (8HP) width form factors with various daughter boards to provide a broad range of I/O requirements. Faceplate I/O on the single-slot (4HP) version includes 2x DP, 2x GbE and 2x USB 3.0 ports (these I/O are common to all versions). Faceplate I/O on the dual-slot (8HP) version includes additional 2x USB 2.0, 1x COM, 1x VGA on the cPCI-A3515B or additional 2x USB 2.0, 1x COM and Line-in/Line-out on the cPCI-A3515D.
Graphics support is integrated on the CPU and allows 3 independent displays on the faceplate of the cPCI-A3515B with its additional VGA output. Storage includes an mSATA slot or a 32GB SSD (optional) and 2.5″ SATA drive on the layer 2 riser card (cPCI-A3515B/D).
Serial interfaces on the backplane connectors P1 to P5 include one PCI Express x8, two PCI Express x4, three PCI Express x1, four SATA 6Gb/s, two USB 3.0, and eight USB 2.0 ports. Additionally, the P6 connector supports up to eight Gigabit Ethernet interfaces.
The cPCI-A3515 is a high performance solution for transportation, factory automation, defense and other industrial applications that require superior data transfer capability and advanced computing power. The ADLINK cPCI-A3515 provides high manageability, supports Satellite mode operation as a standalone blade in peripheral slots, and Smart Embedded Management Agent (SEMA) for system health monitoring. In addition, with multiple operating system and board support package (BSP) support, users can build a reliable and high-performance industrial system with cPCI-A3515 Series.
Ordering infomation
-
cPCI-A3515B/4700E/M82-slot (8HP) 3U CompactPCI and CompactPCI Serial blade with Intel® Core™ i7-4700EQ processor and 8GB DDR3L-1600 ECC soldered memory, 2x DP, 2x GbE, 2x USB 3.0, COM, 2x USB 2.0, VGA, mSATA socket, SATA connector, and CompactPCI J1 and J2 connectors
-
cPCI-A3515D/4700E/M82-slot (8HP) 3U CompactPCI Serial blade with Intel® Core™ i7-4700EQ processor and 8GB DDR3L-1600 ECC soldered memory, 2x DP, 2x GbE, 2x USB 3.0, COM, 2x USB 2.0, Line-in, Line-out, mSATA socket and SATA connector
-
cPCI-A3515D/5700E/M162-slot (8HP) 3U CompactPCI Serial blade with Intel® Core™ i7-5700EQ processor and 16GB DDR3L-1333 ECC soldered memory, 2x DP, 2x GbE, 2x USB 3.0, COM, 2x USB 2.0, Line-in, Line-out, mSATA socket and SATA connector
-
cPCI-A3515/5700E/M16/S321-slot (4HP) 3U CompactPCI Serial blade with Intel® Core™ i7-5700EQ processor and 16GB DDR3L-1333 ECC soldered memory, 2x DP, 2x GbE, 2x USB 3.0 and onboard 32GB SSD
-
cPCI-A3515/4700E/M8/S321-slot (4HP) 3U CompactPCI Serial blade with Intel® Core™ i7-4700EQ processor and 8GB DDR3L-1600 ECC soldered memory, 2x DP, 2x GbE, 2x USB 3.0 and onboard 32GB SSD
-
cPCI-A3515B/5700E/M162-slot (8HP) 3U CompactPCI and CompactPCI Serial blade with Intel® Core™ i7-5700EQ processor and 16GB DDR3L-1333 ECC soldered memory, 2x DP, 2x GbE, 2x USB 3.0, COM, 2x USB 2.0, VGA, mSATA socket, SATA connector, and CompactPCI J1 and J2 connectors
-
DP-DVI cableDisplayPort to DVI adapter cable
-
DP-VGA cableDisplayPort to VGA adapter cable
-
DP-HDMI cableDisplayPort to HDMI adapter cable
Sản phẩm tương tự
-
CompactPCI/PlusIO/Serial
cPCI-6S10
Đọc tiếp6U CompactPCI 10 Gigabit Ethernet Switch Blade
Datasheet: Download
Key Features
- ARM Cortex-A9 processor integrated in Broadcom BCM56150 switch
- 24-port fully managed Gigabit Ethernet switch
- Pre-installed ADLINK PacketManager accelerates packet processing
- Layer 2/3 switching with advanced support for VLANs, QoS and IPv6
- Two 10 Gigabit Ethernet SFP+ uplink ports
- Supports IPMI based on PICMG 2.9 (System Management Specification)
-
CompactPCI/PlusIO/Serial
cPCIS-6130R
Đọc tiếp2-slot CompactPCI® Rackmount ChassisDatasheet: DownloadKey Features- 19″ rackmount, 1U height for 6U cPCI boards with 80 mm rear I/O
- PICMG® 2.1 Hot Swap compliant 64-bit 2-slot CompactPCI® backplane
- One cPCI segment, lower-side system slot
- Built-in 200 W AC input power supply
- Guarded power switch and reset button
-
CompactPCI/PlusIO/Serial
cPCI-A3H10
Đọc tiếp3U CompactPCI Serial 2.5″ SATA Storage Carrier
Datasheet: Download
Key Features- 3U 4HP CPCI-S.0 peripheral
- One 2.5″ SATA 6Gb/s drive slot
- Status LEDs on faceplate: drive activity, hot-swap status, user-configurable
- Hot swap support
- Operating temperature: -40°C to 85°C with qualified compon
-
CompactPCI/PlusIO/Serial
cPCI-3548
Đọc tiếp3U CompactPCI 8-port serial communication module
Key Features
- Supports 32-bit/33MHz CompactPCI bus
- 16C550A compatible serial communication controller
- Eight RS-232/422/485 asynchronous communications ports with intelligent buffer
- 2500 VDC signal to ground isolation voltage
- Auto-flow control; change mode by dip switch
- Plug-and-play, IRQ & I/O address automatically assigned by PCI BIOS, shared IRQ
- Surge protectors; rugged DB-62 connector
Giỏ hàng
Liên hệ:
Phoenix Contact
ADLINK – Máy tính Công nghiệp
KSS (đầu Cos, phụ kiện KSS)
Đánh giá
Chưa có đánh giá nào.