Categories
Máy tính công nghiệp ADLINK
PLASTIM
KAI SUH SUH
Cable Clips
Caps
Communication Connectors
Conduits
PCB Parts
Plastic Screws
RJ45 Modular Plug And Plug Cover
Value Pack
Wiring Ducts
Bushings
Cable Clamps
Cable Gland
Cable Marker
Cable Tie
Fasteners
Terminal
Cord End Terminal
Cord End Terminal (double)
Female Lug
Male Lug
- Non Insulated Cord End
- Wire Connector/Nut
- Blade Terminal
- Flanged Spade Terminal
- Fully Receptacle
- Hook Terminal
- Insulated Bullet
- Insulated Ring Terminal
- Insulated Ring Terminal Easy Entry
- Insulated Y Terminal
- Insulated Y Terminal Easy Entry
- Pin Terminals
- Ring Terminal
- Y Terminal
Tubes
Wire Connectors
Wrapping Bands
PHOENIX CONTACT
AUTOMATE
CONNECT
Cables and lines for signals, data, and power
Connectors for device connection and field cabling
Distribution blocks for load and control current distribution
Distributors, adapters, and conductor connectors for reliable signal, data, and power cabling
Electronics housings for the DIN rail and for field applications
Accessories and HMI components for electronics housings
Customer-specific electronics housings
Development kits for electronics housings
DIN rail housings for control cabinet applications
BC modular electronics housings for building automation
EH basic electronics housings for universal applications
Electronics housings for Raspberry Pi applications
ICS modular electronics housings for IoT applications
ME MAX modular electronics housings in a flexible modular design
ME modular electronics housings in an easy-to-install cup shape
ME-IO multifunctional electronics housings with modular front connection technology
ME-PLC multifunctional housings for controllers
UM-ALU extruded profile housings for high EMC
UM-BASIC extruded profile housings for custom PCB sizes
UM-PRO extruded profile housings for high temperature resistance
Field housings for outdoor use
FINEPITCH board-to-board connectors for the connection of PCBs within the device
PCB terminal blocks and PCB connectors
Plug-in test systems for protection technology and control engineering
System cabling for controllers
Terminal Blocks
Disconnect and knife-disconnect terminal blocks
- End Cover
Feed-through terminal blocks, multi-conductor terminal blocks, and multi-level terminal blocks
Fuse terminal blocks, component terminal blocks, and diode terminal blocks
High-current terminal blocks
Hybrid terminal blocks
Installation terminal blocks
Marshaling panels
Marshalling patchboards
Micro and miniature terminal blocks
Plug-in terminal blocks
Sensor terminal blocks and actuator terminal block
UT Screw
- UK Universal
- TB Screw
PT Push-in Terminal block
ST Spring-cage Terminal block
QT Fast
RT Bolt
- SK Shield
MARK, ASSEMBLE, AND INSTALL
Automatic tools
Control cabinet accessories
Crimp connectors
Ferrules
Hand tools for industry and manual work
Industrial lighting and signal technology
Junction boxes and empty enclosures
Marking material for industrial identification
Printers
Software for control cabinet building
Worker assistance systems
SUPPLY, CHARGE, AND PROTECT
CHARX – Charging technology for e-mobility
DC/DC converters and DC/AC inverters
Device circuit breakers
EMC filters for a reliable power supply
Power distributors: The system with integrated busbar for your control cabinet
Protective relays for mains protection
Redundancy modules
Surge protection and lightning protection
Uninterruptible power supplies (UPS)
Power Supply
SWITCH, MEASURE AND MONITOR
TERMINAL BLOCK
Accessories
- SCHNEIDER
Phoenix Contact
cPCI-6S10
6U CompactPCI 10 Gigabit Ethernet Switch Blade
Datasheet: Download
Key Features
- ARM Cortex-A9 processor integrated in Broadcom BCM56150 switch
- 24-port fully managed Gigabit Ethernet switch
- Pre-installed ADLINK PacketManager accelerates packet processing
- Layer 2/3 switching with advanced support for VLANs, QoS and IPv6
- Two 10 Gigabit Ethernet SFP+ uplink ports
- Supports IPMI based on PICMG 2.9 (System Management Specification)
Introduction
Conforming to the PICMG 2.16 specification, the ADLINK cPCI-6S10 is a fully-managed CompactPCI Gigabit Ethernet switch blade supporting up to twenty four 1GbE ports and two 10GbE SPF+ uplink ports. On the front panel are three GbE ports, two 10GbE SFP+ uplink ports, one COM port and one 10/100 RJ-45 management port. Twenty GbE ports are routed to rear I/O and an IPMI interface is provided to monitor and control system health.
The ADLINK cPCI-6S10 integrates Broadcom BCM56150 switch silicon with built-in ARM Cortex-A9 processor and one Broadcom BCM54685 Octal port 1000BASE-T PHY. The cPCI-6S10 is ideal for CompactPCI platform adopters who require high-speed and high-bandwidth data transport interconnects for packet switching management.
The ADLINK cPCI-6S10 supports ADLINK PacketManager, a software suite with an extensive feature set and integration capabilities that enables powerful networking functionality for the Base Interface. It supports friendly CLI (Command Line Interface) for customer easy management and provides comprehensive device management capabilities for network administrators. The cPCI-6S10 bundled PacketManager supports port management, LACP(IEEE802.3ad Link Aggregation Control Protocal), STP (IEEE802.1D Spanning Tree Protocal), VLAN management, ACL (Access Control List) and QoS (Quality of Service).
Designed to meet the needs of various challenging applications in industrial and military systems, the ADLINK cPCI-6S10 facilitates communications within a chassis and outside of chassis. It supports redundancy based on PICMG 2.16 specification to be used for mission critical environment supporting IPMI v1.5 and extended temperature configuration on request.
Ordering information
-
cPCI-6S101-slot (4HP) 6U CompactPCI switch blade with 24-port 100BASE-T, 2-port 10G SFP+ ports and PacketManager software bundle
-
cBP-6609A Backplane8-slot 64-bit 6U cPCI H.110 & 2.16 Bus Backplane cBP-6614A
-
cPCI-R6S10 Rear Transition Module6U 8HP CompactPCI, 20-port 1000/BASE-T Ethernet Rear Transition Module
Sản phẩm tương tự
-
CompactPCI/PlusIO/Serial
cPCI-8602
Đọc tiếp6U CompactPCI Dual 64-bit PMC Slots Carrier Board
Datasheet: Download
Key Features
- Supports two single-size 32,64-bit/33,66 MHz PMC sites in 4HP width
- PICMG® 2.0 32,64-bit/33,66 MHz cPCI bus
- PICMG® 2.1 Hot Swap Specification Compliant
- 3.3V or 5V V(I/O) for cPCI bus and PMC sites
- PLX® PCI-to PCI bridge PCI6154 for PCI bus
- Power and HotSwap LED incidators on front panel
-
CompactPCI/PlusIO/Serial
cPCI-3548
Đọc tiếp3U CompactPCI 8-port serial communication module
Key Features
- Supports 32-bit/33MHz CompactPCI bus
- 16C550A compatible serial communication controller
- Eight RS-232/422/485 asynchronous communications ports with intelligent buffer
- 2500 VDC signal to ground isolation voltage
- Auto-flow control; change mode by dip switch
- Plug-and-play, IRQ & I/O address automatically assigned by PCI BIOS, shared IRQ
- Surge protectors; rugged DB-62 connector
-
CompactPCI/PlusIO/Serial
cPCIS-6400X Series
Đọc tiếp4U 5-slot CompactPCI® Chassis with 400 W Power Supply
Datasheet: Download
Key Features- Standard 6U CompactPCI® and PICMG® 2.5 H.110 CT Bus
- PICMG® 2.1 Hot Swap compliant 32-bit or 64-bit 5-slot CompactPCI® backplane with P3 & P5 rear I/O
- Built-in 400 W AC-input ATX power supply
- Built-in slim type optical drive
- Dual-removable SATA HDD racks
Giỏ hàng
Liên hệ:
Phoenix Contact
ADLINK – Máy tính Công nghiệp
KSS (đầu Cos, phụ kiện KSS)
Đánh giá
Chưa có đánh giá nào.