Categories
Máy tính công nghiệp ADLINK
PLASTIM
KAI SUH SUH
Cable Clips
Caps
Communication Connectors
Conduits
PCB Parts
Plastic Screws
RJ45 Modular Plug And Plug Cover
Value Pack
Wiring Ducts
Bushings
Cable Clamps
Cable Gland
Cable Marker
Cable Tie
Fasteners
Terminal
Cord End Terminal
Cord End Terminal (double)
Female Lug
Male Lug
- Non Insulated Cord End
- Wire Connector/Nut
- Blade Terminal
- Flanged Spade Terminal
- Fully Receptacle
- Hook Terminal
- Insulated Bullet
- Insulated Ring Terminal
- Insulated Ring Terminal Easy Entry
- Insulated Y Terminal
- Insulated Y Terminal Easy Entry
- Pin Terminals
- Ring Terminal
- Y Terminal
Tubes
Wire Connectors
Wrapping Bands
PHOENIX CONTACT
AUTOMATE
CONNECT
Cables and lines for signals, data, and power
Connectors for device connection and field cabling
Distribution blocks for load and control current distribution
Distributors, adapters, and conductor connectors for reliable signal, data, and power cabling
Electronics housings for the DIN rail and for field applications
Accessories and HMI components for electronics housings
Customer-specific electronics housings
Development kits for electronics housings
DIN rail housings for control cabinet applications
BC modular electronics housings for building automation
EH basic electronics housings for universal applications
Electronics housings for Raspberry Pi applications
ICS modular electronics housings for IoT applications
ME MAX modular electronics housings in a flexible modular design
ME modular electronics housings in an easy-to-install cup shape
ME-IO multifunctional electronics housings with modular front connection technology
ME-PLC multifunctional housings for controllers
UM-ALU extruded profile housings for high EMC
UM-BASIC extruded profile housings for custom PCB sizes
UM-PRO extruded profile housings for high temperature resistance
Field housings for outdoor use
FINEPITCH board-to-board connectors for the connection of PCBs within the device
PCB terminal blocks and PCB connectors
Plug-in test systems for protection technology and control engineering
System cabling for controllers
Terminal Blocks
Disconnect and knife-disconnect terminal blocks
- End Cover
Feed-through terminal blocks, multi-conductor terminal blocks, and multi-level terminal blocks
Fuse terminal blocks, component terminal blocks, and diode terminal blocks
High-current terminal blocks
Hybrid terminal blocks
Installation terminal blocks
Marshaling panels
Marshalling patchboards
Micro and miniature terminal blocks
Plug-in terminal blocks
Sensor terminal blocks and actuator terminal block
UT Screw
- UK Universal
- TB Screw
PT Push-in Terminal block
ST Spring-cage Terminal block
QT Fast
RT Bolt
- SK Shield
MARK, ASSEMBLE, AND INSTALL
Automatic tools
Control cabinet accessories
Crimp connectors
Ferrules
Hand tools for industry and manual work
Industrial lighting and signal technology
Junction boxes and empty enclosures
Marking material for industrial identification
Printers
Software for control cabinet building
Worker assistance systems
SUPPLY, CHARGE, AND PROTECT
CHARX – Charging technology for e-mobility
DC/DC converters and DC/AC inverters
Device circuit breakers
EMC filters for a reliable power supply
Power distributors: The system with integrated busbar for your control cabinet
Protective relays for mains protection
Redundancy modules
Surge protection and lightning protection
Uninterruptible power supplies (UPS)
Power Supply
SWITCH, MEASURE AND MONITOR
TERMINAL BLOCK
Accessories
- SCHNEIDER
Phoenix Contact
CM3-BT4
Introduction
The CMx-BTx is a PC/104-based, Single Board Computer (SBC), fully compliant with the PCI-104 Specification, Version 1.1 and partially compliant with the PC/104 Specification, Version 2.6. PC/104 SBCs are very compact and highly integrated computers. This SBC features the 22nm, Intel® Bay Trail SoC. The board provides a DDR3L SO-DIMM socket, a PC/104 connector, a PCI-104 connector, three USB 2.0 ports, up to two Gigabit Ethernet ports, up to two SATA 3 Gb/s ports, one dedicated HD-Audio panel connector, one VGA port, one LVDS port, up to four COM ports, one mini-PCIe slot (with one USB 2.0 port included). The CMx-BTx can be run with only 5 volts and is capable of running operating systems like DOS, Windows 7/8 in either 32-bit or 64-bit configuration, Linux, VxWorks, and others. Another feature included on the board is a fail safe BIOS that enables the user to start the module even if the original BIOS is corrupted.
SEMA
At the heart of SEMA is the Board Management Controller (BMC) supporting SEMA functions. The SEMA Extended EAPI provides access to all functions and can be integrated into the user’s own applications. The SEMA GUI and SEMA Command Line Interface allow monitoring, control and use of the SEMA parameters and functions directly on your device for test and demonstration purposes.Optionally SEMA supports also remote procedure calls – please refer to SEMA Software Installation Guide.
Detailed forensic information is available after system or module failures. The BMC Power-Up Error Log function provides detailed information about history of failures that may have occurred during power-up sequences. Log information includes e.g. error number, flags, restart event, power cycles, boot count, status, CPU temperature and board temperature. Moreover minimum and maximum temperature of the CPU and system is available, as well as HDD S.M.A.R.T information- all of which can be used to analyze system or module failure in detail.
SEMA is available for Linux and Windows operating systems and for various HW platforms.
Extreme Rugged
Our Rugged and Extreme Rugged products are developed using our Extreme Rugged Development Guidelines and Design Rules, and subjected to extensive voltage and temperature margin tests during the new product development process, in addition to Highly Accelerated Life Test (HALT) and shock and vibration testing. The ruggedness and reliability of the design is then validated using HALT, shock & vibration testing and voltage margining. This thorough testing regimen allows us to verify that ADLINK products meet the stringent requirements demanded by our customers.
– Highly Accelerated Life Test
– HALT
– Shock & Vibration
– Voltage and Temperature Margin Test
– Extended Temperature Testing
– Design Check
– Engineering Verification
– Pilot Run
– ETT Production Screening
– Conformal Coating
– Extended Life Cycle
Ordering information
-
CM3-BT4-E3845PCI-104, Atom E3845 (4C), 1.91 GHz, Quad Core, incl. heat spreader, Standard operating temperature: 0°C to +60°C (ETT screening -40°C to +85°C)
-
DDR3L memoryVerified 2GB, 4GB DDR3L SODIMM memory available
-
CMx-BTx-X-10CMx-BTx cable kit
-
CMx-BTx-TM-10Passive low profile heatsink for CMx-BTx
-
CMx-BTx-TM-20Active low profile heatsink for CMx-BTx (with fan)
Sản phẩm tương tự
-
PC/104 SBCs
CMx-SLx
Đọc tiếpPCI/104-Express Type 1 Single Board Computer with 6th Gen. Intel® Core™ Processor (formerly codenamed Skylake)
Datasheet: Download
Key Features
- 6th gen. Intel Core Processor (formerly codenamed Skylake)
- Up to 8GB DDR4-ECC soldered memory
- 3x DDI channels, 1x micro HDMI, 1x mini DP and 1x 18/24 bit single channel LVDS
- 4x PCIe x1 and 1x PCIe x 16 (PEG) configurable as 1x PCIe x16 or 2x PCIe x8 or 1x PCIe x8 + 2x PCIe x4
- 2x GbE LAN, 2x SATA 6Gb/s, 1x USB 3.1, 6x USB 2.0, 2x COM, 8x GPIO
- Supports Smart Embedded Management Agent (SEMA®) functions
- Extreme Rugged operating temperature -40°C to +85°C variant
Giỏ hàng
Liên hệ:
Phoenix Contact
ADLINK – Máy tính Công nghiệp
KSS (đầu Cos, phụ kiện KSS)
Đánh giá
Chưa có đánh giá nào.