Categories
- Máy tính công nghiệp ADLINK
- PLASTIM
- KAI SUH SUH
- Cable Clips
- Caps
- Communication Connectors
- Conduits
- PCB Parts
- Plastic Screws
- RJ45 Modular Plug And Plug Cover
- Value Pack
- Wiring Ducts
- Bushings
- Cable Clamps
- Cable Gland
- Cable Marker
- Cable Tie
- Fasteners
- Terminal
- Cord End Terminal
- Cord End Terminal (double)
- Female Lug
- Male Lug
- Non Insulated Cord End
- Wire Connector/Nut
- Blade Terminal
- Flanged Spade Terminal
- Fully Receptacle
- Hook Terminal
- Insulated Bullet
- Insulated Ring Terminal
- Insulated Ring Terminal Easy Entry
- Insulated Y Terminal
- Insulated Y Terminal Easy Entry
- Pin Terminals
- Ring Terminal
- Y Terminal
- Tubes
- Wire Connectors
- Wrapping Bands
- PHOENIX CONTACT
- AUTOMATE
- CONNECT
- Cables and lines for signals, data, and power
- Connectors for device connection and field cabling
- Distribution blocks for load and control current distribution
- Distributors, adapters, and conductor connectors for reliable signal, data, and power cabling
- Electronics housings for the DIN rail and for field applications
- Accessories and HMI components for electronics housings
- Customer-specific electronics housings
- Development kits for electronics housings
- DIN rail housings for control cabinet applications
- BC modular electronics housings for building automation
- EH basic electronics housings for universal applications
- Electronics housings for Raspberry Pi applications
- ICS modular electronics housings for IoT applications
- ME MAX modular electronics housings in a flexible modular design
- ME modular electronics housings in an easy-to-install cup shape
- ME-IO multifunctional electronics housings with modular front connection technology
- ME-PLC multifunctional housings for controllers
- UM-ALU extruded profile housings for high EMC
- UM-BASIC extruded profile housings for custom PCB sizes
- UM-PRO extruded profile housings for high temperature resistance
- Field housings for outdoor use
- FINEPITCH board-to-board connectors for the connection of PCBs within the device
- PCB terminal blocks and PCB connectors
- Plug-in test systems for protection technology and control engineering
- System cabling for controllers
- Terminal Blocks
- Disconnect and knife-disconnect terminal blocks
- End Cover
- Feed-through terminal blocks, multi-conductor terminal blocks, and multi-level terminal blocks
- Fuse terminal blocks, component terminal blocks, and diode terminal blocks
- High-current terminal blocks
- Hybrid terminal blocks
- Installation terminal blocks
- Marshaling panels
- Marshalling patchboards
- Micro and miniature terminal blocks
- Plug-in terminal blocks
- Sensor terminal blocks and actuator terminal block
- UT Screw
- UK Universal
- TB Screw
- PT Push-in Terminal block
- ST Spring-cage Terminal block
- QT Fast
- RT Bolt
- SK Shield
- MARK, ASSEMBLE, AND INSTALL
- Automatic tools
- Control cabinet accessories
- Crimp connectors
- Ferrules
- Hand tools for industry and manual work
- Industrial lighting and signal technology
- Junction boxes and empty enclosures
- Marking material for industrial identification
- Printers
- Software for control cabinet building
- Worker assistance systems
- SUPPLY, CHARGE, AND PROTECT
- CHARX – Charging technology for e-mobility
- DC/DC converters and DC/AC inverters
- Device circuit breakers
- EMC filters for a reliable power supply
- Power distributors: The system with integrated busbar for your control cabinet
- Protective relays for mains protection
- Redundancy modules
- Surge protection and lightning protection
- Uninterruptible power supplies (UPS)
- Power Supply
- SWITCH, MEASURE AND MONITOR
- TERMINAL BLOCK
- Accessories
- SCHNEIDER
Phoenix Contact
Bộ nguồn UNO-PS/1AC/24DC/100W – 2902993
- Mã sản phẩm:2902993
- Tên sản phẩm: Bộ nguồn UNO-PS/1AC/24DC/100W
- Hãng sản xuất: Phoenix Contact
- Mô tả:Bộ nguồn UNO đầu vào 1 pha AC, đầu ra 24VDC 4 A, mã hàng UNO-PS / 1AC / 24DC / 100W – 2902993, gắn được trên thanh DIN rail.
- Địa chỉ: Số 48 đường số 5 khu đô thị Vạn Phúc, P. Hiệp Bình Phước, Q. Thủ Đức, TP. Hồ Chí Minh, Việt Nam
Hotline: 1900 6697
Email: info@thien-son.com.vn - Luôn đặt lợi ích của khách hàng lên hàng đầu, giữ vững đạo đức trong kinh doanh. “Lợi ích của bạn – thành công của chúng tôi; thành công của bạn – niềm vui của chúng tôi”.
Danh mục: PHOENIX CONTACT, Power supplies with basic functionality, Power Supply
Từ khóa: 2902993, bộ nguồn uno, power supply, uno 2902993
Dimensions
Width | 55 mm |
---|---|
Height | 90 mm |
Depth | 84 mm |
Ambient conditions
Degree of protection | IP20 |
---|---|
Inflammability class in acc. with UL 94 (housing / terminal blocks) | V0 |
Ambient temperature (operation) | -25 °C … 70 °C (> 55 °C Derating: 2.5 %/K) |
Ambient temperature (start-up type tested) | -40 °C |
Ambient temperature (storage/transport) | -40 °C … 85 °C |
Max. permissible relative humidity (operation) | ≤ 95 % (at 25 °C, non-condensing) |
Climatic class | 3K3 (in acc. with EN 60721) |
Degree of pollution | 2 |
Input data
Nominal input voltage range | 100 V AC … 240 V AC |
---|---|
Input voltage range | 85 V AC … 264 V AC |
Frequency range (fN) | 50 Hz … 60 Hz 10 % |
Current consumption | 2.1 A (100 V AC) |
0.95 A (240 V AC) | |
Nominal power consumption | 242.6 VA |
Inrush current | < 40 A (typical) |
Mains buffering time | > 20 ms (120 V AC) |
> 100 ms (230 V AC) | |
Input fuse | 4 A (slow-blow, internal) |
Recommended breaker for input protection | 6 A … 16 A (Characteristics B, C, D, K) |
Power factor (cos phi) | 0.47 |
Type of protection | Transient surge protection |
Protective circuit/component | Varistor |
Output data
Nominal output voltage | 24 V DC ±1 % |
---|---|
Nominal output current (IN) | 4.2 A (-25 °C … 55 °C) |
Derating | 55 °C … 70 °C (2.5%/K) |
Connection in parallel | Yes, for redundancy and increased capacity |
Connection in series | yes |
Feedback voltage resistance | < 35 V DC |
Protection against overvoltage at the output (OVP) | ≤ 35 V DC |
Control deviation | < 1 % (change in load, static 10 % … 90 %) |
< 2 % (Dynamic load change 10 % … 90 %, 10 Hz) | |
< 0.1 % (change in input voltage ±10 %) | |
Residual ripple | < 30 mVPP (with nominal values) |
Output power | 100 W |
Typical response time | < 1 s |
Maximum power dissipation in no-load condition | < 0.5 W |
Power loss nominal load max. | < 11 W |
General
Net weight | 0.34 kg |
---|---|
Efficiency | typ. 88 % (120 V AC) |
typ. 89 % (230 V AC) | |
MTBF (IEC 61709, SN 29500) | > 738000 h (40 °C) |
Insulation voltage input/output | 4 kV AC (type test) |
3 kV AC (routine test) | |
Degree of protection | IP20 |
Protection class | II (in closed control cabinet) |
Inflammability class in acc. with UL 94 (housing / terminal blocks) | V0 |
Housing material | Polycarbonate |
Foot latch material | POM (Polyoxymethylen) |
Mounting position | horizontal DIN rail NS 35, EN 60715 |
Assembly instructions | alignable: 0 mm horizontally, 30 mm vertically |
Connection data, input
Connection method | Screw connection |
---|---|
Conductor cross section solid min. | 0.2 mm² |
Conductor cross section solid max. | 2.5 mm² |
Conductor cross section flexible min. | 0.2 mm² |
Conductor cross section flexible max. | 2.5 mm² |
Conductor cross section AWG min. | 24 |
Conductor cross section AWG max. | 14 |
Stripping length | 8 mm |
Screw thread | M3 |
Connection data, output
Connection method | Screw connection |
---|---|
Conductor cross section solid min. | 0.2 mm² |
Conductor cross section solid max. | 2.5 mm² |
Conductor cross section flexible min. | 0.2 mm² |
Conductor cross section flexible max. | 2.5 mm² |
Conductor cross section AWG min. | 24 |
Conductor cross section AWG max. | 14 |
Stripping length | 8 mm |
Screw thread | M3 |
Standards
EMC requirements for noise immunity | EN 61000-6-1 |
---|---|
EN 61000-6-2 | |
EMC requirements for noise emission | EN 61000-6-3 |
EN 61000-6-4 | |
Standard – Safety of transformers | EN 61558-2-16 |
Standard – Electrical safety | IEC 60950-1/VDE 0805 (SELV) |
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations | EN 50178/VDE 0160 (PELV) |
Standard – Safety extra-low voltage | IEC 60950-1 (SELV) and EN 60204-1 (PELV) |
Standard – Safe isolation | DIN VDE 0100-410 |
Standard – Limitation of mains harmonic currents | EN 61000-3-2 |
Mains variation/undervoltage | EN 61000-4-11 |
Conformance/approvals
UL approvals | UL/C-UL listed UL 508 |
---|---|
UL/C-UL Listed ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D T4 (Hazardous Location) | |
UL/C-UL Recognized UL 60950-1 | |
CSA | CAN/CSA-C22.2 No. 60950-1-07 |
CSA-C22.2 No. 107.1-01 | |
CAN/CSA-C22.2 No. 213 Class I, Division 2, Groups A, B, C, D T4 (Hazardous Location) |
EMC data
Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
---|---|
Low Voltage Directive | Conformance with Low Voltage Directive 2014/35/EC |
Electrostatic discharge | EN 61000-4-2 |
Contact discharge | 6 kV (Test Level 3) |
Discharge in air | 8 kV (Test Level 3) |
Electromagnetic HF field | EN 61000-4-3 |
Frequency range | 80 MHz … 1 GHz |
Test field strength | 10 V/m |
Frequency range | 1 GHz … 2 GHz |
Test field strength | 10 V/m |
Frequency range | 2 GHz … 3 GHz |
Test field strength | 10 V/m |
Comments | Criterion A |
Fast transients (burst) | EN 61000-4-4 |
Input | 4 kV (Test Level 4 – asymmetrical) |
Output | 2 kV (Test Level 3 – asymmetrical) |
Comments | Criterion A |
Surge voltage load (surge) | EN 61000-4-5 |
Input | 2 kV (Test Level 3 – symmetrical) |
4 kV (Test Level 4 – asymmetrical) | |
Output | 1 kV (Test Level 2 – symmetrical) |
2 kV (Test Level 1 – asymmetrical) | |
Comments | Criterion B |
Conducted interference | EN 61000-4-6 |
Frequency range | 150 kHz … 80 MHz |
Voltage | 10 V (Test Level 3) |
Comments | Criterion A |
Voltage dips | EN 61000-4-11 |
Criterion A | Normal operating behavior within the specified limits. |
Criterion B | Temporary impairment to operational behavior that is corrected by the device itself. |
Environmental Product Compliance
REACh SVHC | Lead 7439-92-1 |
---|---|
China RoHS | Environmentally Friendly Use Period = 25; |
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer’s declaration” |
Hãy là người đầu tiên nhận xét “Bộ nguồn UNO-PS/1AC/24DC/100W – 2902993” Hủy
Sản phẩm tương tự
-
PHOENIX CONTACT
End clamp – E/UK – 1201442
₫0.80Thêm vào giỏ hàng*Description: End clamp, width: 9.5 mm, height: 35.3 mm, material: PA, length: 50.5 mm, Mounting on a DIN rail NS 32 or NS 35, color: gray
*Country of origin: IN (India)
Your advantages
-With universal foot for NS 35 and NS 32 DIN rails
-Tall and low-profile designs
-Large-surface labeling
Đặt mua Bộ nguồn UNO-PS/1AC/24DC/100W - 2902993
Bộ nguồn UNO-PS/1AC/24DC/100W - 2902993
Giỏ hàng
Liên hệ:
Phoenix Contact
ADLINK – Máy tính Công nghiệp
KSS (đầu Cos, phụ kiện KSS)
Đánh giá
Chưa có đánh giá nào.