Bộ nguồn – QUINT-PS/1AC/24DC/10-2866763

Mã sản phẩm: 2866763
Tên sản phẩm: Bộ nguồn QUINT-PS/1AC/24DC/10-2866763
Hãng sản xuất: Phoenix Contact
Mô tả:Bộ nguồn QUINT đầu vào: 1 AC, đầu ra: 24 VDC /10A, mã hàng QUINT-PS/1AC/24DC/10 – 2866763 , gắn được trên thanh DIN rail với công nghệ SFB(ngắt cầu chì chọn lọc)
Địa chỉ: Số 48 đường số 5 khu đô thị Vạn Phúc, P. Hiệp Bình Phước, Q. Thủ Đức, TP. Hồ Chí Minh, Việt Nam
Hotline: 1900 6697
Email: info@thien-son.com.vn
Luôn đặt lợi ích của khách hàng lên hàng đầu, giữ vững đạo đức trong kinh doanh. “Lợi ích của bạn – thành công của chúng tôi; thành công của bạn – niềm vui của chúng tôi”.

Danh mục: Power supplies with maximum functionality, Power Supply Từ khóa: 2866763, bộ nguồn quint, power supply, quint

Mô tả
Đánh giá (0)

Dimensions

Width	60 mm
Height	130 mm
Depth	125 mm
Width with alternative assembly	122 mm
Height with alternative assembly	130 mm
Depth with alternative assembly	63 mm

Ambient conditions

Degree of protection	IP20
Ambient temperature (operation)	-25 °C … 70 °C (> 60 °C Derating: 2.5 %/K)
Ambient temperature (start-up type tested)	-40 °C
Ambient temperature (storage/transport)	-40 °C … 85 °C
Max. permissible relative humidity (operation)	≤ 95 % (at 25 °C, non-condensing)
Climatic class	3K3 (in acc. with EN 60721)
Degree of pollution	2
Installation height	5000 m

Input data

Nominal input voltage range	100 V AC … 240 V AC
	110 V DC … 250 V DC
Input voltage range	85 V AC … 264 V AC
	90 V DC … 350 V DC (UL 508: ≤ 300 V DC)
Dielectric strength maximum	300 V AC
AC frequency range	45 Hz … 65 Hz
Frequency range DC	0 Hz
Discharge current to PE	< 3.5 mA
Current consumption	2.2 A (120 V AC)
	1.3 A (230 V AC)
	2.5 A (110 V DC)
	1.2 A (220 V DC)
Nominal power consumption	302 VA
Inrush current	< 15 A
Mains buffering time	> 36 ms (120 V AC)
	> 36 ms (230 V AC)
Input fuse	10 A (slow-blow, internal)
Recommended breaker for input protection	10 A … 20 A (AC: Characteristics B, C, D, K)
Power factor (cos phi)	0.85
Type of protection	Transient surge protection
Protective circuit/component	Varistor, gas-filled surge arrester

Output data

Nominal output voltage	24 V DC ±1 %
Setting range of the output voltage (U_Set)	18 V DC … 29.5 V DC (> 24 V DC, constant capacity restricted)
Nominal output current (I_N)	10 A (-25 °C … 60 °C, U_OUT = 24 V DC)
POWER BOOST (I_Boost)	15 A (-25°C … 40°C permanent, U_OUT = 24 V DC )
Selective Fuse Breaking (I_SFB)	60 A (12 ms)
Derating	60 °C … 70 °C (2.5%/K)
Connection in parallel	Yes, for redundancy and increased capacity
Connection in series	yes
Feedback voltage resistance	max. 35 V DC
Protection against overvoltage at the output (OVP)	< 35 V DC
Control deviation	< 1 % (change in load, static 10 % … 90 %)
	< 2 % (change in load, dynamic 10 % … 90 %)
	< 0.1 % (change in input voltage ±10 %)
Residual ripple	< 50 mV_PP (with nominal values)
Output power	240 W
Typical response time	< 0.15 s
Maximum power dissipation in no-load condition	9.1 W
Power loss nominal load max.	22 W

General

Net weight	1.1 kg
Efficiency	> 92.5 % (for 230 V AC and nominal values)
MTBF (IEC 61709, SN 29500)	> 940000 h (25 °C)
	> 530000 h (40 °C)
	> 230000 h (60 °C)
Insulation voltage input/output	4 kV AC (type test)
	2 kV AC (routine test)
Insulation voltage input / PE	3.5 kV AC (type test)
	2 kV AC (routine test)
Insulation voltage output / PE	500 V DC (routine test)
Degree of protection	IP20
Protection class	I
Mounting position	horizontal DIN rail NS 35, EN 60715
Assembly instructions	alignable: P_N ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm vertically alignable: P_N <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom

Connection data, input

Connection method	Pluggable screw connection
Conductor cross section solid min.	0.2 mm²
Conductor cross section solid max.	2.5 mm²
Conductor cross section flexible min.	0.2 mm²
Conductor cross section flexible max.	2.5 mm²
Conductor cross section AWG min.	16
Conductor cross section AWG max.	12
Stripping length	7 mm
Screw thread	M3

Connection data, output

Connection method	Pluggable screw connection
Conductor cross section solid min.	0.2 mm²
Conductor cross section solid max.	2.5 mm²
Conductor cross section flexible min.	0.2 mm²
Conductor cross section flexible max.	2.5 mm²
Conductor cross section AWG min.	16
Conductor cross section AWG max.	12
Stripping length	7 mm
Screw thread	M3

Connection data for signaling

Connection method	Pluggable screw connection
Conductor cross section solid min.	0.2 mm²
Conductor cross section solid max.	2.5 mm²
Conductor cross section flexible min.	0.2 mm²
Conductor cross section flexible max.	2.5 mm²
Conductor cross section AWG min.	16
Conductor cross section AWG max.	12
Screw thread	M3

Standards and Regulations

Electromagnetic compatibility	Conformance with EMC Directive 2014/30/EU
Noise immunity	EN 61000-6-2
Connection in acc. with standard	CSA
Standards/regulations	EN 61000-4-2
Contact discharge	4 kV (Test Level 2)
Standards/regulations	EN 61000-4-3
Frequency range	80 MHz … 1 GHz
Test field strength	10 V/m (Test Level 3)
Frequency range	1.4 GHz … 2 GHz
Test field strength	3 V/m (Test Level 2)
Standards/regulations	EN 61000-4-4
Comments	Criterion B
Standards/regulations	EN 61000-6-3
	EN 61000-4-6
Frequency range	0.15 MHz … 80 MHz
Voltage	10 V (Test Level 3)
Low Voltage Directive	Conformance with Low Voltage Directive 2014/35/EC
Standard – Electrical safety	IEC 60950-1/VDE 0805 (SELV)
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations	EN 50178/VDE 0160 (PELV)
Standard – Safety extra-low voltage	IEC 60950-1 (SELV) and EN 60204-1 (PELV)
Standard – Safe isolation	DIN VDE 0100-410
Standard – Limitation of mains harmonic currents	EN 61000-3-2
Standard – Equipment safety	BG (design tested)
Standard – Approval for medical use	IEC 60601-1, 2 x MOOP
Shipbuilding approval	DNV GL (EMC B), ABS, LR, RINA, NK, BV
UL approvals	UL Listed UL 508
	UL/C-UL Recognized UL 60950-1
	UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D (Hazardous Location)
DeviceNet approval	DeviceNet™ Power Supply Conformance Tested
Shock	18 ms, 30g, in each space direction (according to IEC 60068-2-27)
Vibration (operation)	< 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6)
	15 Hz … 150 Hz, 2.3g, 90 min.
Approval – requirement of the semiconductor industry with regard to mains voltage dips	SEMI F47-0706 Compliance Certificate
Certificate	IEC 60950-1 (2^nd Edition)
Rail applications	EN 50121-4
Overvoltage category (EN 62477-1)	III

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “Bộ nguồn – QUINT-PS/1AC/24DC/10-2866763”

Phoenix Contact

Bộ nguồn – QUINT-PS/1AC/24DC/10-2866763

Dimensions

Ambient conditions

Input data

Output data

General

Connection data, input

Connection data, output

Connection data for signaling

Standards and Regulations

Đánh giá

Giỏ hàng

Liên hệ:

Phoenix Contact

Bộ nguồn – QUINT-PS/1AC/24DC/10-2866763

Dimensions

Ambient conditions

Input data

Output data

General

Connection data, input

Connection data, output

Connection data for signaling

Standards and Regulations

Đánh giá

Sản phẩm tương tự

Bộ nguồn TRIO-PS/1AC/48DC/ 5 – 2866491

Bộ nguồn – ESSENTIAL-PS/1AC/24DC/120W/EE – 2910586

Bộ nguồn UNO-PS / 1AC / 24DC / 30W – 2902991

Bộ nguồn – TRIO-PS/1AC/24DC/10 – 2866323

Giỏ hàng

Liên hệ: