Categories
- Máy tính công nghiệp ADLINK
- PLASTIM
- KAI SUH SUH
- Cable Clips
- Caps
- Communication Connectors
- Conduits
- PCB Parts
- Plastic Screws
- RJ45 Modular Plug And Plug Cover
- Value Pack
- Wiring Ducts
- Bushings
- Cable Clamps
- Cable Gland
- Cable Marker
- Cable Tie
- Fasteners
- Terminal
- Cord End Terminal
- Cord End Terminal (double)
- Female Lug
- Male Lug
- Non Insulated Cord End
- Wire Connector/Nut
- Blade Terminal
- Flanged Spade Terminal
- Fully Receptacle
- Hook Terminal
- Insulated Bullet
- Insulated Ring Terminal
- Insulated Ring Terminal Easy Entry
- Insulated Y Terminal
- Insulated Y Terminal Easy Entry
- Pin Terminals
- Ring Terminal
- Y Terminal
- Tubes
- Wire Connectors
- Wrapping Bands
- PHOENIX CONTACT
- AUTOMATE
- CONNECT
- Cables and lines for signals, data, and power
- Connectors for device connection and field cabling
- Distribution blocks for load and control current distribution
- Distributors, adapters, and conductor connectors for reliable signal, data, and power cabling
- Electronics housings for the DIN rail and for field applications
- Accessories and HMI components for electronics housings
- Customer-specific electronics housings
- Development kits for electronics housings
- DIN rail housings for control cabinet applications
- BC modular electronics housings for building automation
- EH basic electronics housings for universal applications
- Electronics housings for Raspberry Pi applications
- ICS modular electronics housings for IoT applications
- ME MAX modular electronics housings in a flexible modular design
- ME modular electronics housings in an easy-to-install cup shape
- ME-IO multifunctional electronics housings with modular front connection technology
- ME-PLC multifunctional housings for controllers
- UM-ALU extruded profile housings for high EMC
- UM-BASIC extruded profile housings for custom PCB sizes
- UM-PRO extruded profile housings for high temperature resistance
- Field housings for outdoor use
- FINEPITCH board-to-board connectors for the connection of PCBs within the device
- PCB terminal blocks and PCB connectors
- Plug-in test systems for protection technology and control engineering
- System cabling for controllers
- Terminal Blocks
- Disconnect and knife-disconnect terminal blocks
- End Cover
- Feed-through terminal blocks, multi-conductor terminal blocks, and multi-level terminal blocks
- Fuse terminal blocks, component terminal blocks, and diode terminal blocks
- High-current terminal blocks
- Hybrid terminal blocks
- Installation terminal blocks
- Marshaling panels
- Marshalling patchboards
- Micro and miniature terminal blocks
- Plug-in terminal blocks
- Sensor terminal blocks and actuator terminal block
- UT Screw
- UK Universal
- TB Screw
- PT Push-in Terminal block
- ST Spring-cage Terminal block
- QT Fast
- RT Bolt
- SK Shield
- MARK, ASSEMBLE, AND INSTALL
- Automatic tools
- Control cabinet accessories
- Crimp connectors
- Ferrules
- Hand tools for industry and manual work
- Industrial lighting and signal technology
- Junction boxes and empty enclosures
- Marking material for industrial identification
- Printers
- Software for control cabinet building
- Worker assistance systems
- SUPPLY, CHARGE, AND PROTECT
- CHARX – Charging technology for e-mobility
- DC/DC converters and DC/AC inverters
- Device circuit breakers
- EMC filters for a reliable power supply
- Power distributors: The system with integrated busbar for your control cabinet
- Protective relays for mains protection
- Redundancy modules
- Surge protection and lightning protection
- Uninterruptible power supplies (UPS)
- Power Supply
- SWITCH, MEASURE AND MONITOR
- TERMINAL BLOCK
- Accessories
- SCHNEIDER
Phoenix Contact
AmITX-CF-I
Mini-ITX Embedded Board with 8th/9th Gen Intel® Core™ i7/i5/i3 Processors
Datasheet: Download
- 8th/9th Gen Intel® Core™ i7/i5/i3 and Intel® Pentium®/Celeron®
- Dual-channel DDR4 2400/2666 MHz non-ECC SODIMM memory up to 32 GB (dependent on CPU)
- DisplayPort, HDMI and DVI-D display outputs on rear IO
Introduction
The AmITX-CF-I is a Mini-ITX motherboard supporting the 8th/9th Gen Intel® Core™ i9/i7/i5/i3, Pentium® and Celeron® processor in the LGA1151 package, and the Intel Q370/H310 chipset. The AmITX-CF-I is specifically designed for customers who need high-level processing and graphics performance with a long product life solution. This model supports ubiquitous high-speed data transfer interfaces PCIe 3.0, USB 3.1 Gen2 and SATA 6 Gb/s (SATA III), with dual-channel DDR4 2400/2666 MHz non-ECC memory up to 32 GB in two SODIMM slots. The AmITX-CF-I features DVI, DP and HDMI ports, LVDS header, dual Gigabit Ethernet ports, USB 3.0 ports, USB 2.0 ports, SATA 6 Gb/s ports, and audio with Line-out, Line-in and Mic-in connectors. Expansion is provided by one PCIe x16, one M.2, and one mini-PCIe slot. The onboard pin header provides GPIO, USB and RS-232 support. The board is equipped with SPI AMI EFI BIOS, supporting embedded features such as hardware monitor and watchdog timer.
-
AmITX-CF-IMini-ATX 8th/9th Intel® Core™ i9/i7/i5/i3, Pentium® or Celeron® industrial motherboard (Note: CPU, memory module and cooler kit are not included)
Sản phẩm tương tự
-
Mini-ITX Motherboards
AmITX-HL-G
Đọc tiếpMini-ITX Embedded Board with 4th Gen Intel Core i7/i5/i3, Pentium and Celeron Desktop Processor (formerly codename: Haswell/Refresh Haswell)
Datasheet: Download
Key Features
- 4th Gen Intel Core i7/i5/i3, Pentium and Celeron Desktop Processor with Intel® Q87/H81 Chipset (codename: Haswell/Haswell Refresh)
- 1x PCIe x16, 1x PCIe x1 and Mini PCIe expansions
- 3 DisplayPorts and LVDS (opt.)
- Q87: 3x SATA 6 Gb/s; H81: 1x SATA 3 Gb/s and 2x SATA 6 Gb/s
- Q87: 4x USB 3.0, 9x USB 2.0; H81: 2x USB 3.0, 11x USB 2.0
- 1x PCIe x16, 1x PCIe x1, 1x full size Mini PCIe + USB or mSATA, 1x half size Mini PCIe USB, 1x SPI header for external BIOS
- High Definition Audio with 7.1 channels
- Vertical onboard USB 2.0 for a security dongle
-
Mini-ITX Motherboards
AmITX-AL-I
Đọc tiếpThin Mini-ITX Embedded board with Intel Atom® E3900 series, Pentium®, and Celeron® SoC (formerly codename: Apollo Lake)
Datasheet: Download
Key Features
- Low-profile Thin Mini-ITX Embedded board
- Intel VT-x/VT-d supported
- Up to 16GB non-ECC DDR3L memory at 1866/1600 MHz in dual stacked SODIMM socket
- Intel® Gen9 Low Power graphics, up to 4k resolution and H.265 codec
- DisplayPort, HDMI, dual channel 18/24-bit LVDS (eDP by build option), supports three independent displays
- Supports Smart Embedded Management Agent (SEMA) functions
- Extreme Rugged operating temperature: -40°C to +85°C (build option for selected SKUs)
-
Mini-ITX Motherboards
AmITX-BE-G
Đọc tiếpMini-ITX Embedded Board with AMD Embedded R-Series APU (formerly codename: Bald Eagle)
Datasheet: Download
Key Features
- AMD® Embedded R-Series APU with A77E Fusion Controller Hub
- Up to 16 GB non-ECC dual channel DDR3L at 1600/1333 MHz
- 2x LAN, 4x USB 3.0, 9x USB 2.0, 4x COM, 2x Mini-PCIe, mSATA, PCIe x16 (Gen 3) & PCIe x1 (Gen 2)
- 4 DisplayPort and LVDS (opt.)
- Vertical onboard USB 3.0 port with spacing for security
- SPI pin-header and socketed SPI BIOS chip for option
- 2x PCIe cards in parallel
- Designed to meet GLI
-
Mini-ITX Motherboards
AmITX-SL-G
Đọc tiếpUpdated Mini-ITX Embedded Board with 6th/7th Gen Intel Core i7/i5/i3, Pentium and Celeron Desktop Processor (formerly codename: Sky Lake)
Datasheet: Download
Key Features- 6th/7th Gen Intel Core i7/i5/i3, Intel Pentium G4400/G4400TE and Celeron G3900/G3900TE Desktop Processor with Intel® Q170/H110 Chipsets
- Up to 32 GB dual channel DDR4 at 2133 MHz
- Intel Gen 9 graphics, 3x DP, LVDS co-lay with eDP (opt.)
- 1x PCIe x16 (Gen 3), 1x PCIe x1 (Gen 2), 1x full size Mini PCIe + USB or mSATA, 1x half size Mini PCIe + USB, 1x SPI header for external BIOS
- Q170: 7x USB 3.0, 4x USB 2.0; H110: 4x USB 3.0, 7x USB 2.0
Giỏ hàng
Liên hệ:
Phoenix Contact
ADLINK – Máy tính Công nghiệp
KSS (đầu Cos, phụ kiện KSS)
Đánh giá
Chưa có đánh giá nào.