Categories
Máy tính công nghiệp ADLINK
KAI SUH SUH
Cable Clips
Caps
Communication Connectors
Conduits
PCB Parts
Plastic Screws
RJ45 Modular Plug And Plug Cover
Value Pack
Wiring Ducts
Bushings
Cable Clamps
Cable Gland
Cable Marker
Cable Tie
Fasteners
Terminal
Cord End Terminal
Cord End Terminal (double)
Female Lug
Male Lug
- Non Insulated Cord End
- Wire Connector/Nut
- Blade Terminal
- Flanged Spade Terminal
- Fully Receptacle
- Hook Terminal
- Insulated Bullet
- Insulated Ring Terminal
- Insulated Ring Terminal Easy Entry
- Insulated Y Terminal
- Insulated Y Terminal Easy Entry
- Pin Terminals
- Ring Terminal
- Y Terminal
Tubes
Wire Connectors
Wrapping Bands
PHOENIX CONTACT
AUTOMATE
CONNECT
Cables and lines for signals, data, and power
Connectors for device connection and field cabling
Distribution blocks for load and control current distribution
Distributors, adapters, and conductor connectors for reliable signal, data, and power cabling
Electronics housings for the DIN rail and for field applications
Accessories and HMI components for electronics housings
Customer-specific electronics housings
Development kits for electronics housings
DIN rail housings for control cabinet applications
BC modular electronics housings for building automation
EH basic electronics housings for universal applications
Electronics housings for Raspberry Pi applications
ICS modular electronics housings for IoT applications
ME MAX modular electronics housings in a flexible modular design
ME modular electronics housings in an easy-to-install cup shape
ME-IO multifunctional electronics housings with modular front connection technology
ME-PLC multifunctional housings for controllers
UM-ALU extruded profile housings for high EMC
UM-BASIC extruded profile housings for custom PCB sizes
UM-PRO extruded profile housings for high temperature resistance
Field housings for outdoor use
FINEPITCH board-to-board connectors for the connection of PCBs within the device
PCB terminal blocks and PCB connectors
Plug-in test systems for protection technology and control engineering
System cabling for controllers
Terminal Blocks
Disconnect and knife-disconnect terminal blocks
- End Cover
Feed-through terminal blocks, multi-conductor terminal blocks, and multi-level terminal blocks
Fuse terminal blocks, component terminal blocks, and diode terminal blocks
High-current terminal blocks
Hybrid terminal blocks
Installation terminal blocks
Marshaling panels
Marshalling patchboards
Micro and miniature terminal blocks
Plug-in terminal blocks
Sensor terminal blocks and actuator terminal block
UT Screw
- UK Universal
- TB Screw
PT Push-in Terminal block
ST Spring-cage Terminal block
QT Fast
RT Bolt
- SK Shield
MARK, ASSEMBLE, AND INSTALL
Automatic tools
Control cabinet accessories
Crimp connectors
Ferrules
Hand tools for industry and manual work
Industrial lighting and signal technology
Junction boxes and empty enclosures
Marking material for industrial identification
Printers
Software for control cabinet building
Worker assistance systems
SUPPLY, CHARGE, AND PROTECT
CHARX – Charging technology for e-mobility
DC/DC converters and DC/AC inverters
Device circuit breakers
EMC filters for a reliable power supply
Power distributors: The system with integrated busbar for your control cabinet
Protective relays for mains protection
Redundancy modules
Surge protection and lightning protection
Uninterruptible power supplies (UPS)
Power Supply
SWITCH, MEASURE AND MONITOR
TERMINAL BLOCK
Accessories
- SCHNEIDER
Phoenix Contact
AmITX-CF-G
Mini-ITX Embedded Board with 8th/9th Gen Intel® Core™ Desktop Processor
Datasheet: Download
Key Features
- 8th/9th Gen Intel® Core™ i7/i5/i3, Intel® Pentium® and Celeron® Desktop Processor with Intel® Q370/H310 Chipset
- Up to 32GB dual channel DDR4 at 2400MHz
- PCIe x16, PCIe x1, M.2 and Mini-PCIe expansion
- 3 DisplayPort outputs on rear IO (Q370)
- Supports Smart Embedded Management Agent (SEMA®) functions
- 2x USB 3.1 Gen 1 onboard header (H310: 1x USB 2.0)
- 4x USB 3.1 Gen 1
Introduction
Targeted at gaming customers and system integrators, AmITX-CF-G is a Mini-ITX board specially designed for Gaming. AmITX-CF-G features GLI compliance, easy and flexible configuration, security enhancements, and system resilience. The values of AmITX-CF-G include amplified visual impact, guaranteed system integrity, secure transactions with fast TTM and low TCO, and maximized system uptime. AmITX-CF-G can satisfy application function requirements and meet GLI certification which cannot be offered by other conventional Mini-ITX boards.
-
AmITX-CF-G-Q370Mini-ITX Embedded Board with 8th/9th generation Intel® Core™ i7/i5/i3 Desktop Processor with Q370 Chipset
-
AmITX-CF-G-H310Mini-ITX Embedded Board with 8th/9th generation Intel® Core™ i7/i5/i3 Desktop Processor with H310 Chipset
-
30-20876-0000COM Port Cable, 1 Port, 25cm
-
30-20873-0000USB 3.0 Cable, 2 ports, 20cm (for AmITX-KB-G-Q370)
-
30-20874-1000USB 2.0 Cable, 2 ports, 20cm (for AmITX-KB-G-H310)
-
32-20581-0000LGA1150 CPU Cooler, H=59.52mm, 35W
-
32-20818-1000-A0LGA1150 CPU Cooler, H=65.6mm, 65W
Sản phẩm tương tự
-
Mini-ITX Motherboards
AmITX-HL-G
Đọc tiếpMini-ITX Embedded Board with 4th Gen Intel Core i7/i5/i3, Pentium and Celeron Desktop Processor (formerly codename: Haswell/Refresh Haswell)
Datasheet: Download
Key Features
- 4th Gen Intel Core i7/i5/i3, Pentium and Celeron Desktop Processor with Intel® Q87/H81 Chipset (codename: Haswell/Haswell Refresh)
- 1x PCIe x16, 1x PCIe x1 and Mini PCIe expansions
- 3 DisplayPorts and LVDS (opt.)
- Q87: 3x SATA 6 Gb/s; H81: 1x SATA 3 Gb/s and 2x SATA 6 Gb/s
- Q87: 4x USB 3.0, 9x USB 2.0; H81: 2x USB 3.0, 11x USB 2.0
- 1x PCIe x16, 1x PCIe x1, 1x full size Mini PCIe + USB or mSATA, 1x half size Mini PCIe USB, 1x SPI header for external BIOS
- High Definition Audio with 7.1 channels
- Vertical onboard USB 2.0 for a security dongle
-
Mini-ITX Motherboards
AmITX-BE-G
Đọc tiếpMini-ITX Embedded Board with AMD Embedded R-Series APU (formerly codename: Bald Eagle)
Datasheet: Download
Key Features
- AMD® Embedded R-Series APU with A77E Fusion Controller Hub
- Up to 16 GB non-ECC dual channel DDR3L at 1600/1333 MHz
- 2x LAN, 4x USB 3.0, 9x USB 2.0, 4x COM, 2x Mini-PCIe, mSATA, PCIe x16 (Gen 3) & PCIe x1 (Gen 2)
- 4 DisplayPort and LVDS (opt.)
- Vertical onboard USB 3.0 port with spacing for security
- SPI pin-header and socketed SPI BIOS chip for option
- 2x PCIe cards in parallel
- Designed to meet GLI
-
Mini-ITX Motherboards
AmITX-SL-G
Đọc tiếpUpdated Mini-ITX Embedded Board with 6th/7th Gen Intel Core i7/i5/i3, Pentium and Celeron Desktop Processor (formerly codename: Sky Lake)
Datasheet: Download
Key Features- 6th/7th Gen Intel Core i7/i5/i3, Intel Pentium G4400/G4400TE and Celeron G3900/G3900TE Desktop Processor with Intel® Q170/H110 Chipsets
- Up to 32 GB dual channel DDR4 at 2133 MHz
- Intel Gen 9 graphics, 3x DP, LVDS co-lay with eDP (opt.)
- 1x PCIe x16 (Gen 3), 1x PCIe x1 (Gen 2), 1x full size Mini PCIe + USB or mSATA, 1x half size Mini PCIe + USB, 1x SPI header for external BIOS
- Q170: 7x USB 3.0, 4x USB 2.0; H110: 4x USB 3.0, 7x USB 2.0
-
Mini-ITX Motherboards
AmITX-AL-I
Đọc tiếpThin Mini-ITX Embedded board with Intel Atom® E3900 series, Pentium®, and Celeron® SoC (formerly codename: Apollo Lake)
Datasheet: Download
Key Features
- Low-profile Thin Mini-ITX Embedded board
- Intel VT-x/VT-d supported
- Up to 16GB non-ECC DDR3L memory at 1866/1600 MHz in dual stacked SODIMM socket
- Intel® Gen9 Low Power graphics, up to 4k resolution and H.265 codec
- DisplayPort, HDMI, dual channel 18/24-bit LVDS (eDP by build option), supports three independent displays
- Supports Smart Embedded Management Agent (SEMA) functions
- Extreme Rugged operating temperature: -40°C to +85°C (build option for selected SKUs)
Giỏ hàng
Liên hệ:
Phoenix Contact
ADLINK – Máy tính Công nghiệp
KSS (đầu Cos, phụ kiện KSS)

AdvancedTCA
AdvancedTCA Platform
AdvancedTCA Processor Blade
AdvancedTCA Switch Blade
CompactPCI, PC/104, VPX SBCs
CompactPCI/PlusIO/Serial
PC/104 SBCs
Computer-On-Modules
GPU & Edge AI
Industrial Motherboards & SBCs
ATX Motherboards
Industrial PCs, Fanless Embedded PCs
Expandable Fanless Embedded PCs
Integrated Fanless Embedded PCs
Motion, Machine Vision, Fieldbus
Motion Control
Panel PCs & HMIs
Peripherals
Rugged SFF Platforms & Servers
Movable Bushing
Screw Plug (Metric Thread)
Snap Bushing
Strain Relief Bushing
Cable Clamp
Saddle Type Tie Mount
Self Adhesive Tie Mount
ECP Type Cable Marker
Flat Cable Marker
Marker Box
Marker Plate
Marker Strip
O Type Marker Tube
Marker Tie
Security Marker Tie
Nylon Cable Tie
Nylon Cable Tie UV
Washer
Locking Wire Saddle
Cloud computing
Edge computing
HMI panels and industrial PCs
Industrial communication – From fieldbus through to Industrial Ethernet
Ethernet Switch
SFNB Switch
PLCs (controllers) and I/Os
Cables by the meter
Customer-specific cable assemblies
Data cables
Hybrid cables
Installation cable
PV cables
Signal cables and power cables
Circular connectors
Connectors for energy storage systems: Connection technology for busbars and battery poles
Data connectors for all interfaces
DC connectors
Heavy-duty connectors
Installation connector
Modular rectangular connectors
Photovoltaic connectors
Connectors
Adapters and couplings
Conductor connectors
Distributor boxes
Distributors and fuses
Distributors for installation systems
Distributors for M8, M12, and AS-Interface connections
Splice boxes for future-proof data transmission
DCS display carriers for wall mounting in industrial applications
ECS outdoor housings
HC-ALU profile housings
HCS handheld housings
Large-volume OCS outdoor housings
UCS universal housings
Customer-specific PCB connections
High-current feed-through terminal blocks
PCB terminal blocks
Wire-to-board connectors optimized
PCB connectors
Components for retrofits
Controller-specific system cabling
System cables with D-SUB and FLK connectors
Universal modules
Mounting material
Automatic crimping device
Automatic cutting device
Automatic stripping and crimping devices
Automatic stripping device
Cable entry system and cable glands
Cable routing and cable protection
Electrical outlets and service interfaces
Enclosure lights
Mounting material
Shield clamps
Crimping
Cutting tools
Electronics tools
Profile and DIN rail cutters
Screwdrivers and cordless screwdrivers
Stripping tool
Testing tools and measuring tools
Tool marking
Tool sets
Universal tools
Tool
Machine lights
Signal lights
Conductor and cable marking
Equipment marking
Plant marking
Automated identification
Laser marker
Mobile printer
Plotter and engraver
Thermal transfer printers
UV LED printers
Planning and marking software
Material provision
Worker assistance system
AC charging cables
AC charging controllers
AC charging sockets
Charging inlets
DC charging cables
DC charging controllers
DC power electronics
Surge protection for charging stations and home chargers
DC/AC inverters
DC/DC converter
Electronic circuit breakers
Thermal device circuit breakers
Thermomagnetic device circuit breakers
Active redundancy modules
Diode modules
Isolating spark gap
Surge protection for information technology
Surge protection for MCR technology and signals
Surge protection for photovoltaic systems
String combiner boxes for photovoltaic systems
Surge protective devices for photovoltaic systems
Surge protection for power supplies
Protection for NA power supply systems
Surge protection for direct current
Type 1+2 surge protection
Type 2 surge protection
Type 3 surge protection
Surge protection for transmitter and receiver systems
Test and monitoring devices
Surge Arrester
Power supplies for building automation
Essential Series
Power supplies with maximum functionality
Power supplies with standard functionality
Power supplies with basic functionality
Energy monitoring
I/O signal marshalling
Motor starters and electronic switching devices
Motor, machine, and system monitoring
Process indicators and field devices
Relays and optocouplers
Relay
Safety relay modules and sensors
Signal conditioners and measuring transducers
MCR Technology- MINI MCR
Signal conditioners
BIẾN TẦN









Đánh giá
Chưa có đánh giá nào.