Categories
Máy tính công nghiệp ADLINK
- PLASTIM
- Uncategorized
KAI SUH SUH
- RJ45 Modular Plug And Plug Cover
- Bushings
- Cable Clamps
- Cable Marker
- Cable Tie
- Fasteners
- Terminal
- Cord End Terminal
- Cord End Terminal (double)
- Male Lug
- Non Insulated Cord End
- Blade Terminal
- Flanged Spade Terminal
- Fully Receptacle
- Hook Terminal
- Insulated Bullet
- Insulated Ring Terminal
- Insulated Ring Terminal Easy Entry
- Insulated Y Terminal
- Insulated Y Terminal Easy Entry
- Pin Terminals
- Ring Terminal
- Y Terminal
- Tubes
- Wire Connectors
- Wrapping Bands
PHOENIX CONTACT
- SCHNEIDER
AdvancedTCA
AdvancedTCA Platform
CompactPCI, PC/104, VPX SBCs
CompactPCI/PlusIO/Serial
Computer-On-Modules
GPU & Edge AI
Industrial Motherboards & SBCs
ATX Motherboards
Industrial PCs, Fanless Embedded PCs
Expandable Fanless Embedded PCs
Medically Certified Products
Motion, Machine Vision, Fieldbus
Motion Control
Panel PCs & HMIs
Rugged SFF Platforms & Servers
Accessories
PCB connectors
Tool
SFNB Switch
Essential Series
Quint Power supply
Trio Power supply
Uno Power supply
Relay
Signal conditioners
Surge Arrester
Terminal Blocks
3246366 – Cầu đấu dây vặn vít TB 35 I – Feed-through terminal block
Cầu đấu dây 35 mm², dòng 125A, rộng 15.2mm, màu xám đen
– Điện áp danh định : 1000 V
– Dòng điện normal : 125 A , Dòng Max : 125 A
– Phương thức kết nối: Kết nối trục vít
– Tiết diện: 10 mm² – 35 mm²
– AWG: 8 – 2
– Chiều rộng: 15,2 mm, màu: màu xám đen
– Vỏ ngoài: bằng nhựa màu xám, bền, dẻo
– Kiểu lắp: NS 35 / 7,5, NS 35/15
– Dòng cầu đấu dây cơ bản giá rẻ của Phoenix Contact
Địa chỉ: Số 48 đường số 5 khu đô thị Vạn Phúc, P. Hiệp Bình Phước, Q. Thủ Đức, TP. Hồ Chí Minh, Việt Nam
Hotline: 1900 6697
Email: info@thien-son.com.vn
Luôn đặt lợi ích của khách hàng lên hàng đầu, giữ vững đạo đức trong kinh doanh.
“Lợi ích của bạn – thành công của chúng tôi; thành công của bạn – niềm vui của chúng tôi”.
General
| Number of levels | 1 |
|---|---|
| Number of connections | 2 |
| Potentials | 1 |
| Nominal cross section | 35 mm² |
| Color | dark gray |
| Insulating material | PA |
| Flammability rating according to UL 94 | V0 |
| Rated surge voltage | 8 kV |
| Degree of pollution | 3 |
| Overvoltage category | III |
| Insulating material group | I |
| Maximum power dissipation for nominal condition | 4.06 W |
| Maximum load current | 125 A |
| Nominal current IN | 125 A |
| Nominal voltage UN | 1000 V |
| Open side panel | Yes |
| Ambient temperature (operation) | -60 °C … 85 °C |
| Ambient temperature (storage/transport) | -25 °C … 55 °C (For a short time, not exceeding 24 h, -60 to +70 °C) |
| Permissible humidity (storage/transport) | 30 % … 70 % |
| Ambient temperature (assembly) | -5 °C … 70 °C |
| Ambient temperature (actuation) | -5 °C … 70 °C |
| Shock protection test specification | IEC 60529:2001-02 |
| Back of the hand protection | guaranteed |
| Finger protection | guaranteed |
| Result of surge voltage test | Test passed |
| Surge voltage test setpoint | 9.8 kV |
| Result of power-frequency withstand voltage test | Test passed |
| Power frequency withstand voltage setpoint | 2.2 kV |
| Result of the test for mechanical stability of terminal points (5 x conductor connection) | Test passed |
| Result of bending test | Test passed |
| Bending test rotation speed | 10 rpm |
| Bending test turns | 135 |
| Bending test conductor cross section/weight | 10 mm² / 2 kg |
| 35 mm² / 6.8 kg | |
| Tensile test result | Test passed |
| Conductor cross section tensile test | 10 mm² |
| Tractive force setpoint | 90 N |
| Conductor cross section tensile test | 35 mm² |
| Tractive force setpoint | 190 N |
| Result of tight fit on support | Test passed |
| Tight fit on carrier | NS 35 |
| Setpoint | 10 N |
| Result of voltage-drop test | Test passed |
| Requirements, voltage drop | ≤ 3.2 mV |
| Result of temperature-rise test | Test passed |
| Short circuit stability result | Test passed |
| Conductor cross section short circuit testing | 35 mm² |
| Short-time current | 4.2 kA |
| Result of thermal test | Test passed |
| Proof of thermal characteristics (needle flame) effective duration | 30 s |
| Relative insulation material temperature index (Elec., UL 746 B) | 130 °C |
| Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) | 130 °C |
| Static insulating material application in cold | -60 °C |
| Surface flammability NFPA 130 (ASTM E 162) | passed |
| Specific optical density of smoke NFPA 130 (ASTM E 662) | passed |
| Smoke gas toxicity NFPA 130 (SMP 800C) | passed |
| Calorimetric heat release NFPA 130 (ASTM E 1354) | 28 MJ/kg |
| Fire protection for rail vehicles (DIN EN 45545-2) R22 | HL 1 – HL 3 |
| Fire protection for rail vehicles (DIN EN 45545-2) R23 | HL 1 – HL 3 |
| Fire protection for rail vehicles (DIN EN 45545-2) R24 | HL 1 – HL 3 |
| Fire protection for rail vehicles (DIN EN 45545-2) R26 | HL 1 – HL 3 |
Connection data
| Note | Terminal point |
|---|---|
| Connection method | Screw connection |
| Screw thread | M6 |
| Stripping length | 16 mm |
| Tightening torque, min | 3.2 Nm |
| Tightening torque max | 3.7 Nm |
| Connection in acc. with standard | IEC 60947-7-1 |
| Conductor cross section solid min. | 10 mm² |
| Conductor cross section solid max. | 35 mm² |
| Conductor cross section AWG min. | 8 |
| Conductor cross section AWG max. | 2 |
| Conductor cross section flexible min. | 10 mm² |
| Conductor cross section flexible max. | 35 mm² |
| Min. AWG conductor cross section, flexible | 8 |
| Max. AWG conductor cross section, flexible | 2 |
| Conductor cross section flexible, with ferrule without plastic sleeve min. | 6 mm² |
| Conductor cross section flexible, with ferrule without plastic sleeve max. | 35 mm² |
| Conductor cross section flexible, with ferrule with plastic sleeve min. | 6 mm² |
| Conductor cross section flexible, with ferrule with plastic sleeve max. | 35 mm² |
Sản phẩm tương tự
-
PHOENIX CONTACT
Female test connector – PSB 3/10/4 – 0601292
Đọc tiếp*Description: Female test connector, color: silver
*Country of origin: PL (Poland)
Your advantages
-Test sockets PSB … are used for a reliable test connection
-With PSB 6/5/6, the test plug with a 4 mm diameter is used
-All test sockets are screwed into the bridge shaft
-
PHOENIX CONTACT
Switch công nghiệp FL SWITCH SFNB 8TX-2891002
Đọc tiếp*Description: Ethernet switch, 8 TP RJ45 ports, automatic detection of data transmission speed of 10/100 Mbps (RJ45), autocrossing function
*Country of origin: TW (Taiwan)
Your advantages
-Auto negotiation and autocrossing detection simplifies installation and setup
-Local diagnostic indicators with LEDs
-RJ45 ports support a transmission speed of 10/100 Mbps
-
PHOENIX CONTACT
Bộ nguồn – ESSENTIAL-PS/1AC/24DC/120W/EE – 2910586
Đọc tiếp- Mã sản phẩm: 2910586
- Tên sản phẩm: Bộ nguồn ESSENTIAL-PS/1AC/24DC/120W/EE
- Hãng sản xuất: Phoenix Contact
- Mô tả:Bộ nguồn ESSENTIAL đầu vào 1 pha AC, đầu ra 24VDC/5A, mã hàng ESSENTIAL-PS/1AC/24DC/120W/EE – 2910586, gắn được trên thanh DIN rail.
- Địa chỉ: Số 48 đường số 5 khu đô thị Vạn Phúc, P. Hiệp Bình Phước, Q. Thủ Đức, TP. Hồ Chí Minh, Việt Nam
Hotline: 1900 6697
Email: info@thien-son.com.vn - Luôn đặt lợi ích của khách hàng lên hàng đầu, giữ vững đạo đức trong kinh doanh. “Lợi ích của bạn – thành công của chúng tôi; thành công của bạn – niềm vui của chúng tôi”.
-
PHOENIX CONTACT
Type 1+2 protective device combination – FLT-SEC-T1+T2-3S-350/25-FM – 2905470
Đọc tiếp*Description: Plug-in lightning and surge arrester combination, in accordance with Type 1+2/Class I+II, for 3-phase power supply networks, with separate N and PE (L1, L2, L3, PE, N).
*Country of origin: DE (Germany)
Your advantages
-Directly coordinated combination of type 1 spark gap without line follow current and type 2 varistor arrester
-Particularly suitable for maximum protection of sensitive devices in harsh environments
-High continuous voltage of 350 V AC for 230/400 V AC networks with high voltage fluctuations
-Pluggable
-Low voltage protection level of 1.5 kV
-Optical, mechanical status indicator
-With floating remote indication contact
-Plugs can be checked with CHECKMASTER 2
Liên hệ:
Phoenix Contact
Mr Khánh – 0326 32 33 22
Mr Kha – 0879 296 759
Mr Trường – 0902 853 421
Mr Vương – 0916 827 412
ADLINK – Máy tính Công nghiệp
Mr Nguyên – 0964 044 518
Sale ADMIN
Ms Ngân – 0785 503 824
Đánh giá
Chưa có đánh giá nào.