Categories
Máy tính công nghiệp ADLINK
- PLASTIM
- Uncategorized
KAI SUH SUH
- RJ45 Modular Plug And Plug Cover
- Bushings
- Cable Clamps
- Cable Marker
- Cable Tie
- Fasteners
- Terminal
- Cord End Terminal
- Cord End Terminal (double)
- Male Lug
- Non Insulated Cord End
- Blade Terminal
- Flanged Spade Terminal
- Fully Receptacle
- Hook Terminal
- Insulated Bullet
- Insulated Ring Terminal
- Insulated Ring Terminal Easy Entry
- Insulated Y Terminal
- Insulated Y Terminal Easy Entry
- Pin Terminals
- Ring Terminal
- Y Terminal
- Tubes
- Wire Connectors
- Wrapping Bands
PHOENIX CONTACT
- SCHNEIDER
Phoenix Contact
3246311 – Cầu đấu dây vặn vít TB 2,5 I- Feed-through terminal block
Cầu đấu dây 2.5 mm², dòng 24A, rộng 5.2mm, màu xám
– Điện áp danh định : 800 V
– Dòng điện normal : 24 A , Dòng Max : 24 A
– Phương thức kết nối: Kết nối trục vít
– Tiết diện: 0.5 mm² – 4 mm²
– AWG: 20 – 12
– Chiều rộng: 5,2 mm, chiều cao: 46,9 mm, màu: màu xám
– Vỏ ngoài: bằng nhựa màu xám, bền, dẻo
– Kiểu lắp: NS 35 / 7,5, NS 35/15
– Dòng cầu đấu dây cơ bản giá rẻ của Phoenix Contact
Địa chỉ: Số 48 đường số 5 khu đô thị Vạn Phúc, P. Hiệp Bình Phước, Q. Thủ Đức, TP. Hồ Chí Minh, Việt Nam
Hotline: 1900 6697
Email: info@thien-son.com.vn
Luôn đặt lợi ích của khách hàng lên hàng đầu, giữ vững đạo đức trong kinh doanh.
“Lợi ích của bạn – thành công của chúng tôi; thành công của bạn – niềm vui của chúng tôi”.
General
Number of levels | 1 |
---|---|
Number of connections | 2 |
Potentials | 1 |
Nominal cross section | 2.5 mm² |
Color | dark gray |
Insulating material | PA |
Flammability rating according to UL 94 | V0 |
Rated surge voltage | 8 kV |
Degree of pollution | 3 |
Overvoltage category | III |
Insulating material group | I |
Maximum power dissipation for nominal condition | 0.77 W |
Maximum load current | 24 A |
Nominal current IN | 24 A |
Nominal voltage UN | 800 V (630 V for 4 mm² connection) |
Open side panel | Yes |
Ambient temperature (operation) | -60 °C … 85 °C |
Ambient temperature (storage/transport) | -25 °C … 55 °C (For a short time, not exceeding 24 h, -60 to +70 °C) |
Permissible humidity (storage/transport) | 30 % … 70 % |
Ambient temperature (assembly) | -5 °C … 70 °C |
Ambient temperature (actuation) | -5 °C … 70 °C |
Shock protection test specification | DIN EN 50274 (VDE 0660-514):2002-11 |
Back of the hand protection | guaranteed |
Finger protection | guaranteed |
Result of surge voltage test | Test passed |
Surge voltage test setpoint | 9.8 kV |
Result of power-frequency withstand voltage test | Test passed |
Power frequency withstand voltage setpoint | 2 kV |
Result of the test for mechanical stability of terminal points (5 x conductor connection) | Test passed |
Result of bending test | Test passed |
Bending test rotation speed | 10 rpm |
Bending test turns | 135 |
Bending test conductor cross section/weight | 0.5 mm² / 0.3 kg |
2.5 mm² / 0.7 kg | |
4 mm² / 0.9 kg | |
Tensile test result | Test passed |
Conductor cross section tensile test | 0.5 mm² |
Tractive force setpoint | 20 N |
Conductor cross section tensile test | 2.5 mm² |
Tractive force setpoint | 50 N |
Conductor cross section tensile test | 4 mm² |
Tractive force setpoint | 60 N |
Result of tight fit on support | Test passed |
Tight fit on carrier | NS 35/NS 32 |
Setpoint | 1 N |
Result of voltage-drop test | Test passed |
Requirements, voltage drop | ≤ 3.2 mV |
Result of temperature-rise test | Test passed |
Short circuit stability result | Test passed |
Conductor cross section short circuit testing | 2.5 mm² |
Short-time current | 0.3 kA |
Result of thermal test | Test passed |
Proof of thermal characteristics (needle flame) effective duration | 30 s |
Relative insulation material temperature index (Elec., UL 746 B) | 130 °C |
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) | 130 °C |
Static insulating material application in cold | -60 °C |
Dimensions
Width | 5.2 mm |
---|---|
End cover width | 1.5 mm |
Length | 42.5 mm |
Height NS 35/7,5 | 42 mm |
Height NS 35/15 | 49.5 mm |
Height NS 32 | 47 mm |
Connection data
Note | Terminal point |
---|---|
Connection method | Screw connection |
Screw thread | M2,5 |
Stripping length | 7 mm |
Tightening torque, min | 0.4 Nm |
Tightening torque max | 0.5 Nm |
Connection in acc. with standard | IEC 60947-7-1 |
Conductor cross section solid min. | 0.5 mm² |
Conductor cross section solid max. | 4 mm² |
Conductor cross section AWG min. | 20 |
Conductor cross section AWG max. | 12 |
Conductor cross section flexible min. | 0.5 mm² |
Conductor cross section flexible max. | 2.5 mm² |
Min. AWG conductor cross section, flexible | 20 |
Max. AWG conductor cross section, flexible | 14 |
Conductor cross section flexible, with ferrule without plastic sleeve min. | 0.5 mm² |
Conductor cross section flexible, with ferrule without plastic sleeve max. | 2.5 mm² |
Conductor cross section flexible, with ferrule with plastic sleeve min. | 0.5 mm² |
Conductor cross section flexible, with ferrule with plastic sleeve max. | 1.5 mm² |
Cross section with insertion bridge solid min. | 0.5 mm² |
Cross section with insertion bridge, solid max. | 2.5 mm² |
Cross section with insertion bridge stranded min. | 0.5 mm² |
Cross section with insertion bridge, stranded max. | 2.5 mm² |
Standards and Regulations
Connection in acc. with standard | UL |
---|---|
IEC 60947-7-1 | |
Flammability rating according to UL 94 | V0 |
Sản phẩm tương tự
-
PHOENIX CONTACT
Feed-through terminal block – UK 10 N – 3005073
₫1.70Mua hàng*Description: Feed-through terminal block, nom. voltage: 800 V, nominal current: 57 A, connection method: Screw connection, number of connections: 2, cross section: 0.5 mm² – 16 mm², AWG: 20 – 6, width: 10.2 mm, color: gray, mounting type: NS 35/7,5, NS 35/15, NS 32
*Country of origin: CN (China)
Your advantages
-All universal terminal blocks in the UK… series can also be used in the Ex e area according to IEC/EN 60079 as standard
-The corresponding EC-type examination numbers for Ex approval can be found in the technical connection data
-
PHOENIX CONTACT
Plug-in bridge – FBS 10-5 – 3030213
₫2.28Mua hàng*Description: Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 50.6 mm, number of positions: 10, color: red
*Country of origin: DE (Germany)
Your advantages
-The 2- to 50-pos. jumpers can bridge up to 50 terminal blocks in the two bridge shafts of the CLIPLINE complete system in one step
-
PHOENIX CONTACT
Installation terminal block – UIK 35 – 3006182
Đọc tiếp*Description: Installation terminal block, Screw connection, cross section: 0.75 mm² – 35 mm², AWG: 18 – 2, width: 15.2 mm, color: gray, mounting type: NS 35/7,5, NS 35/15, NS 32
*Country of origin: CN (China)
Your advantages
Your advantages
-Installation terminal blocks with a particularly low-profile design for use in flat distributors
-The asymmetrical arrangement of the terminal blocks on the DIN rail enables the neutral busbar to be routed past the terminal blocks

Giỏ hàng
Liên hệ:
Phoenix Contact
Mr Khánh – 0326 32 33 22
Mr Kha – 0879 296 759
Mr Trường – 0902 853 421
Mr Vương – 0916 827 412
ADLINK – Máy tính Công nghiệp
Mr Nguyên – 0964 044 518
Sale ADMIN
Ms Ngân – 0785 503 824
Đánh giá
Chưa có đánh giá nào.