Categories
- Máy tính công nghiệp ADLINK
- PLASTIM
- KAI SUH SUH
- Cable Clips
- Caps
- Communication Connectors
- Conduits
- PCB Parts
- Plastic Screws
- RJ45 Modular Plug And Plug Cover
- Value Pack
- Wiring Ducts
- Bushings
- Cable Clamps
- Cable Gland
- Cable Marker
- Cable Tie
- Fasteners
- Terminal
- Cord End Terminal
- Cord End Terminal (double)
- Female Lug
- Male Lug
- Non Insulated Cord End
- Wire Connector/Nut
- Blade Terminal
- Flanged Spade Terminal
- Fully Receptacle
- Hook Terminal
- Insulated Bullet
- Insulated Ring Terminal
- Insulated Ring Terminal Easy Entry
- Insulated Y Terminal
- Insulated Y Terminal Easy Entry
- Pin Terminals
- Ring Terminal
- Y Terminal
- Tubes
- Wire Connectors
- Wrapping Bands
- PHOENIX CONTACT
- AUTOMATE
- CONNECT
- Cables and lines for signals, data, and power
- Connectors for device connection and field cabling
- Distribution blocks for load and control current distribution
- Distributors, adapters, and conductor connectors for reliable signal, data, and power cabling
- Electronics housings for the DIN rail and for field applications
- Accessories and HMI components for electronics housings
- Customer-specific electronics housings
- Development kits for electronics housings
- DIN rail housings for control cabinet applications
- BC modular electronics housings for building automation
- EH basic electronics housings for universal applications
- Electronics housings for Raspberry Pi applications
- ICS modular electronics housings for IoT applications
- ME MAX modular electronics housings in a flexible modular design
- ME modular electronics housings in an easy-to-install cup shape
- ME-IO multifunctional electronics housings with modular front connection technology
- ME-PLC multifunctional housings for controllers
- UM-ALU extruded profile housings for high EMC
- UM-BASIC extruded profile housings for custom PCB sizes
- UM-PRO extruded profile housings for high temperature resistance
- Field housings for outdoor use
- FINEPITCH board-to-board connectors for the connection of PCBs within the device
- PCB terminal blocks and PCB connectors
- Plug-in test systems for protection technology and control engineering
- System cabling for controllers
- Terminal Blocks
- Disconnect and knife-disconnect terminal blocks
- End Cover
- Feed-through terminal blocks, multi-conductor terminal blocks, and multi-level terminal blocks
- Fuse terminal blocks, component terminal blocks, and diode terminal blocks
- High-current terminal blocks
- Hybrid terminal blocks
- Installation terminal blocks
- Marshaling panels
- Marshalling patchboards
- Micro and miniature terminal blocks
- Plug-in terminal blocks
- Sensor terminal blocks and actuator terminal block
- UT Screw
- UK Universal
- TB Screw
- PT Push-in Terminal block
- ST Spring-cage Terminal block
- QT Fast
- RT Bolt
- SK Shield
- MARK, ASSEMBLE, AND INSTALL
- Automatic tools
- Control cabinet accessories
- Crimp connectors
- Ferrules
- Hand tools for industry and manual work
- Industrial lighting and signal technology
- Junction boxes and empty enclosures
- Marking material for industrial identification
- Printers
- Software for control cabinet building
- Worker assistance systems
- SUPPLY, CHARGE, AND PROTECT
- CHARX – Charging technology for e-mobility
- DC/DC converters and DC/AC inverters
- Device circuit breakers
- EMC filters for a reliable power supply
- Power distributors: The system with integrated busbar for your control cabinet
- Protective relays for mains protection
- Redundancy modules
- Surge protection and lightning protection
- Uninterruptible power supplies (UPS)
- Power Supply
- SWITCH, MEASURE AND MONITOR
- TERMINAL BLOCK
- Accessories
- SCHNEIDER
Phoenix Contact
Danh mục: Surge Arrester
Surge Arrester
Hiển thị tất cả 14 kết quả
-
PHOENIX CONTACT
Chống sét Profibus dạng giắc cắm – Surge protection device – D-UFB-PB – 2880642
Đọc tiếp*Description: Fine surge protection in a 9-pos. D-SUB plug for PROFIBUS-DP applications with a transmission speed of up to 12 Mbps.
*Country of origin: DE (Germany)
Your advantages
-Integrated termination resistor
-Data transmission speed up to 12 Mbps
-Direct use at the interface
-
PHOENIX CONTACT
Chống sét thiết bị – Surge protection device – DT-LAN-CAT.6+ – 2881007
Đọc tiếp*Description: Surge protection in accordance with Class EA (CAT6A), for Gigabit Ethernet (up to 10 Gbps), token ring, FDDI/CDDI, ISDN, and DS1. Suitable for Power over Ethernet (PoE+) “Mode A” and “Mode B”. RJ45 attachment plug with separate grounding cable and ground connection snap-on foot for NS 35 DIN rails.
*Country of origin: DE (Germany)
Your advantages
-Reliable transmission speeds up to 10 Gbps
-Protective adapter for eight signal paths via RJ45 connector
-Suitable for category 6 high-speed data networks
-Can be installed in a control cabinet by removing the ground connection adapter
-
PHOENIX CONTACT
Surge protection device – DT-TELE-RJ45 – 2882925
Đọc tiếp*Description: Attachment plug with surge protection for analog and digital telecommunications interfaces (VDSL up to 50 Mbps). Connection: RJ45 (RJ12/RJ11) and screw terminal block (COMBICON). Alternatively, can be snapped onto a DIN rail.
*Country of origin: DE (Germany)
Your advantages
-For analog and digital (DSL) telecommunications interface
-Connection: RJ45 socket and/or plug-in screw terminal blocks
-The adapter included enables conversion from RJ45 to RJ11 and RJ12
-DIN rail mounting possible by removing the cover cap
-International use thanks to multiple assignment
-
PHOENIX CONTACT
Thiết Bị Chống Sét Cho Hệ Thống Solar VAL-MB-T1/T2-1500DC-PV/2V-2905641
Đọc tiếpĐã bao giờ bạn cảm thấy lo lắng về nguy cơ sét đánh có thể gây hại cho hệ thống năng lượng mặt trời của mình chưa? Đừng để nguy cơ này khiến bạn phải bận tâm thêm nữa! Chúng tôi mang đến một giải pháp toàn diện—thiết bị chống sét VAL-MB-T1/T2 1500DC-PV/2+V từ Phoenix …
Thiết Bị Chống Sét Cho Hệ Thống Solar VAL-MB-T1/T2-1500DC-PV/2V-2905641Read More
-
PHOENIX CONTACT
Thiết bị chống sét lan truyền đường nguồn 1P 40kA – Type 2 surge arrester – VAL-MS 230/1+1 – 2804429
Đọc tiếpYour advantages
- With or without floating remote indication contact
- Multi-channel type 2 arresters
- Optical, mechanical status indication for the individual arresters
- Disconnect device on each individual plug
- Mechanical coding of all slots
- Type 2 consistent plug-in surge arresters
-
Surge Arrester
Thiết bị chống sét lan truyền đường nguồn 3P 4 dây 4kA – Type 2 surge arrester – VAL-MS 230/3+1 – 2838209
Đọc tiếpYour advantages
- With or without floating remote indication contact
- Mechanical coding of all slots
- Optical, mechanical status indication for the individual arresters
- Disconnect device on each individual plug
- Multi-channel type 2 arresters
- Type 2 consistent plug-in surge arresters
-
Surge Arrester
Type 1+2 protective device combination – FLT-SEC-T1+T2-1S-350/25-FM – 2905466
Đọc tiếpYour advantages
- Directly coordinated combination of type 1 spark gap without line follow current and type 2 varistor arrester
- Particularly suitable for maximum protection of sensitive devices in harsh environments
- High continuous voltage of 350 V AC for 230/400 V AC networks with high voltage fluctuations
- Pluggable
- Low voltage protection level of 1.5 kV
- Optical, mechanical status indicator
- With floating remote indication contact
- Plugs can be checked with CHECKMASTER 2
-
PHOENIX CONTACT
Type 1+2 protective device combination – FLT-SEC-T1+T2-3S-350/25-FM – 2905470
Đọc tiếp*Description: Plug-in lightning and surge arrester combination, in accordance with Type 1+2/Class I+II, for 3-phase power supply networks, with separate N and PE (L1, L2, L3, PE, N).
*Country of origin: DE (Germany)
Your advantages
-Directly coordinated combination of type 1 spark gap without line follow current and type 2 varistor arrester
-Particularly suitable for maximum protection of sensitive devices in harsh environments
-High continuous voltage of 350 V AC for 230/400 V AC networks with high voltage fluctuations
-Pluggable
-Low voltage protection level of 1.5 kV
-Optical, mechanical status indicator
-With floating remote indication contact
-Plugs can be checked with CHECKMASTER 2
-
PHOENIX CONTACT
Type 3 surge protection device – PLT-SEC-T3-3S-230-FM – 2905230
Đọc tiếp*Description: Plug-in device protection, according to type 3/class III, for 3-phase power supply networks with separate N and PE (5-conductor system: L1, L2, L3, N, PE), with integrated surge-proof fuse and remote indication contact.
*Country of origin: DE (Germany)
Your advantages
-Varistor-based device protection
-Can be used without separate backup fuse thanks to integrated overcurrent protection
-For multi-phase power supply units
-Pluggable
-Optical status indicator via LED
-With floating remote indication contact
-Plugs can be checked with CHECKMASTER 2
-
PHOENIX CONTACT
Type 3 surge protection device – PT 2-PE/S-24AC/FM – 2800457
Đọc tiếpYour advantages
- Plugs can be checked with CHECKMASTER
- Tool-free plug replacement
- With floating remote indication contact
- Optical signaling of disconnection via LED
- Consists of base element and plug
- DIN rail module
- For single and multi-phase power supply units
Giỏ hàng
Liên hệ:
Phoenix Contact
ADLINK – Máy tính Công nghiệp
KSS (đầu Cos, phụ kiện KSS)