Categories
Máy tính công nghiệp ADLINK
- PLASTIM
- Uncategorized
KAI SUH SUH
- RJ45 Modular Plug And Plug Cover
- Bushings
- Cable Clamps
- Cable Marker
- Cable Tie
- Fasteners
- Terminal
- Cord End Terminal
- Cord End Terminal (double)
- Male Lug
- Non Insulated Cord End
- Blade Terminal
- Flanged Spade Terminal
- Fully Receptacle
- Hook Terminal
- Insulated Bullet
- Insulated Ring Terminal
- Insulated Ring Terminal Easy Entry
- Insulated Y Terminal
- Insulated Y Terminal Easy Entry
- Pin Terminals
- Ring Terminal
- Y Terminal
- Tubes
- Wire Connectors
- Wrapping Bands
PHOENIX CONTACT
- SCHNEIDER
Phoenix Contact
Danh mục: CompactPCI/PlusIO/Serial
CompactPCI/PlusIO/Serial
Showing 1–16 of 28 results
-
CompactPCI/PlusIO/Serial
cPCI-3511(BL) Series
Đọc tiếp3U CompactPCI PlusIO 4th/5th Generation Intel® Core™ i7 Processor Blade with ECCDatasheet: DownloadKey Features- Quad-core 4th/5th Generation Intel® Core™ i7 processor
- Up to 8GB DDR3L ECC soldered memory onboard (16GB for cPCI-3511BL)
- System/Peripheral slot operation
- PICMG 2.30 CompactPCI PlusIO compliant
- Intel® AMT 9.0 support
-
CompactPCI/PlusIO/Serial
cPCI-3548
Đọc tiếp3U CompactPCI 8-port serial communication module
Key Features
- Supports 32-bit/33MHz CompactPCI bus
- 16C550A compatible serial communication controller
- Eight RS-232/422/485 asynchronous communications ports with intelligent buffer
- 2500 VDC signal to ground isolation voltage
- Auto-flow control; change mode by dip switch
- Plug-and-play, IRQ & I/O address automatically assigned by PCI BIOS, shared IRQ
- Surge protectors; rugged DB-62 connector
-
CompactPCI/PlusIO/Serial
cPCI-3630
Đọc tiếp3U CompactPCI Quad-Core Intel Atom® Processor X Series Blade
Datasheet: Download
Key Features
- Low power quad-core Intel Atom® x7-E3950 Processor (formerly Apollo Lake I)
- Up to 8GB DDR3L-1600 ECC soldered memory
- Onboard 32GB SSD support by option
- Smart Embedded Management Agent (SEMA) for system health monitoring
- Optional additional GbE ports with MIL-STD M12 connectors
- EN 50155 compliant for railway safety-critical applications
-
CompactPCI/PlusIO/Serial
cPCI-6S10
Đọc tiếp6U CompactPCI 10 Gigabit Ethernet Switch Blade
Datasheet: Download
Key Features
- ARM Cortex-A9 processor integrated in Broadcom BCM56150 switch
- 24-port fully managed Gigabit Ethernet switch
- Pre-installed ADLINK PacketManager accelerates packet processing
- Layer 2/3 switching with advanced support for VLANs, QoS and IPv6
- Two 10 Gigabit Ethernet SFP+ uplink ports
- Supports IPMI based on PICMG 2.9 (System Management Specification)
-
CompactPCI/PlusIO/Serial
cPCI-8602
Đọc tiếp6U CompactPCI Dual 64-bit PMC Slots Carrier Board
Datasheet: Download
Key Features
- Supports two single-size 32,64-bit/33,66 MHz PMC sites in 4HP width
- PICMG® 2.0 32,64-bit/33,66 MHz cPCI bus
- PICMG® 2.1 Hot Swap Specification Compliant
- 3.3V or 5V V(I/O) for cPCI bus and PMC sites
- PLX® PCI-to PCI bridge PCI6154 for PCI bus
- Power and HotSwap LED incidators on front panel
-
CompactPCI/PlusIO/Serial
cPCI-A3515 Series
Đọc tiếp3U CompactPCI Serial 4th/5th Generation Intel® Core™ Processor Blade with ECC
Datasheet: Download
Key Features
- PICMG® CPCI-S.0 CompactPCI® Serial Processor Blade
- Quad-core 4th/5th Generation Intel® Core™ i7 processor
- Up to 16GB DDR3L ECC soldered memory
- Up to three independent displays
- Optional extended operating temperature -40°C to +85°C (with Intel® cTDP)
- Optional PICMG® 2.0 (CompactPCI®) support
- Smart Embedded Management Agent (SEMA) for system health monitoring
-
CompactPCI/PlusIO/Serial
cPCI-A3525 Series
Đọc tiếp3U CompactPCI Serial 9th Gen Intel Xeon®/Core™ i7 Processor Blade
Datasheet: Download
Key Features
- PICMG® CPCI-S.0 CompactPCI® Serial Processor Blade
- 14nm multi-core 9th Gen Intel® processor (formerly Coffee Lake Refresh)
- Graphics engine integrated in processor supporting independent displays with DirectX 12, OpenGL 4.5
- Max. 32GB DDR4-2666 by 2x SODIMM
- Supports 2x PCIe x8 Gen 3 and 2x PCIe x4 Gen 3
- Up to 10x USB 2.0/3.0, up to 7x SATA to rear
- Supports Satellite mode operation as a standalone blade in peripheral slots
-
CompactPCI/PlusIO/Serial
cPCI-A3H10
Đọc tiếp3U CompactPCI Serial 2.5″ SATA Storage Carrier
Datasheet: Download
Key Features- 3U 4HP CPCI-S.0 peripheral
- One 2.5″ SATA 6Gb/s drive slot
- Status LEDs on faceplate: drive activity, hot-swap status, user-configurable
- Hot swap support
- Operating temperature: -40°C to 85°C with qualified compon
-
CompactPCI/PlusIO/Serial
cPCIS-2500 Series
Đọc tiếp3U CompactPCI 6-slot Cubic Chassis with CompactPCI Power Module
Datasheet: Download
Key Features- Compact size, 4U enclosure for 3U CompactPCI® cards
- Side handle design for portable applications
- Stand feet on bottom side for desktop applications
- Versatile wall-mount application with mounting kit
- Standard PICMG® 2.11 47-Pin modular power supply
-
CompactPCI/PlusIO/Serial
cPCIS-3300BLS
Đọc tiếp9U Blade Server for 12 Blades with Dual Fabric Switch Slots
Datasheet: Download
Key Features
- PICMG® 2.16 Packet Switching Backplane architecture
- Dual PICMG® 2.16 fabric slots for high availability
- 21 slots, including 12 node slots, two fabric slots, three redundant 6U CompactPCI® power modules and one CMM slot
- Hot swappable 800 W + 400 W redundant CompactPCI® power supply with universal AC input
- PICMG® 2.9 compliant backplane with FAL#, DEG# sense and INH# control for each power module
- Optional Chassis Monitoring Module (CMM) for remote monitoring and control via Ethernet
- Redundant cooling architecture
- Magnetic circuit breaker protection for AC input
-
CompactPCI/PlusIO/Serial
cPCIS-3320/AC
Đọc tiếp9U Dual System CompactPCI® Chassis with Redundant Power Supplies
Datasheet: Download
Key Features
- Standard 6U CompactPCI® and PICMG® 2.5 H.110 CT Bus for all peripheral slots
- PICMG® 2.1 Hot Swap compliant 64-bit CompactPCI® backplane with P3 & P5 rear I/O
- Dual cPCI segments (System A: 1 + 7 slots, System B: 1 + 4 slots)
- 3+1 (750 W + 250 W) hot swappable redundant power supplies with universal AC input
- Redundant cooling architecture
- Magnetic circuit breaker protection for AC input
Giỏ hàng
Liên hệ:
Phoenix Contact
Mr Khánh – 0326 32 33 22
Mr Kha – 0879 296 759
Mr Trường – 0902 853 421
Mr Vương – 0916 827 412
ADLINK – Máy tính Công nghiệp
Mr Nguyên – 0964 044 518
Sale ADMIN
Ms Ngân – 0785 503 824