Categories
Máy tính công nghiệp ADLINK
PLASTIM
KAI SUH SUH
Cable Clips
Caps
Communication Connectors
Conduits
PCB Parts
Plastic Screws
RJ45 Modular Plug And Plug Cover
Value Pack
Wiring Ducts
Bushings
Cable Clamps
Cable Gland
Cable Marker
Cable Tie
Fasteners
Terminal
Cord End Terminal
Cord End Terminal (double)
Female Lug
Male Lug
- Non Insulated Cord End
- Wire Connector/Nut
- Blade Terminal
- Flanged Spade Terminal
- Fully Receptacle
- Hook Terminal
- Insulated Bullet
- Insulated Ring Terminal
- Insulated Ring Terminal Easy Entry
- Insulated Y Terminal
- Insulated Y Terminal Easy Entry
- Pin Terminals
- Ring Terminal
- Y Terminal
Tubes
Wire Connectors
Wrapping Bands
PHOENIX CONTACT
AUTOMATE
CONNECT
Cables and lines for signals, data, and power
Connectors for device connection and field cabling
Distribution blocks for load and control current distribution
Distributors, adapters, and conductor connectors for reliable signal, data, and power cabling
Electronics housings for the DIN rail and for field applications
Accessories and HMI components for electronics housings
Customer-specific electronics housings
Development kits for electronics housings
DIN rail housings for control cabinet applications
BC modular electronics housings for building automation
EH basic electronics housings for universal applications
Electronics housings for Raspberry Pi applications
ICS modular electronics housings for IoT applications
ME MAX modular electronics housings in a flexible modular design
ME modular electronics housings in an easy-to-install cup shape
ME-IO multifunctional electronics housings with modular front connection technology
ME-PLC multifunctional housings for controllers
UM-ALU extruded profile housings for high EMC
UM-BASIC extruded profile housings for custom PCB sizes
UM-PRO extruded profile housings for high temperature resistance
Field housings for outdoor use
FINEPITCH board-to-board connectors for the connection of PCBs within the device
PCB terminal blocks and PCB connectors
Plug-in test systems for protection technology and control engineering
System cabling for controllers
Terminal Blocks
Disconnect and knife-disconnect terminal blocks
- End Cover
Feed-through terminal blocks, multi-conductor terminal blocks, and multi-level terminal blocks
Fuse terminal blocks, component terminal blocks, and diode terminal blocks
High-current terminal blocks
Hybrid terminal blocks
Installation terminal blocks
Marshaling panels
Marshalling patchboards
Micro and miniature terminal blocks
Plug-in terminal blocks
Sensor terminal blocks and actuator terminal block
UT Screw
- UK Universal
- TB Screw
PT Push-in Terminal block
ST Spring-cage Terminal block
QT Fast
RT Bolt
- SK Shield
MARK, ASSEMBLE, AND INSTALL
Automatic tools
Control cabinet accessories
Crimp connectors
Ferrules
Hand tools for industry and manual work
Industrial lighting and signal technology
Junction boxes and empty enclosures
Marking material for industrial identification
Printers
Software for control cabinet building
Worker assistance systems
SUPPLY, CHARGE, AND PROTECT
CHARX – Charging technology for e-mobility
DC/DC converters and DC/AC inverters
Device circuit breakers
EMC filters for a reliable power supply
Power distributors: The system with integrated busbar for your control cabinet
Protective relays for mains protection
Redundancy modules
Surge protection and lightning protection
Uninterruptible power supplies (UPS)
Power Supply
SWITCH, MEASURE AND MONITOR
TERMINAL BLOCK
Accessories
- SCHNEIDER
Phoenix Contact

Sản phẩm của hãng Phoenix Contact được sản xuất theo tiêu chuẩn của Đức đáp ứng mọi yêu cầu khắt khe nhất của khách hàng về chất lượng. Các sản phẩm của hãng Phoenix Contact ứng dụng đa dạng trong mọi lĩnh vực lắp ráp và tích hợp các sản phẩm điện – tự động hoá. Hôm nay, Công ty chúng tôi xin phép giới thiệu về sản phẩm của hãng là Bộ nguồn đa năng được dùng phổ biến trong công nghiệp hiện nay.
Bộ nguồn DC đa năng là bộ nguồn một chiều với các nguồn điện áp một chiều khác nhau. Các nguồn chính trong bộ nguồn bao gồm nguồn ±5VDC, ±40VDC, ±15VDC có điều chỉnh, 18VDC có điều chỉnh và mạch hiển thị điện áp ±15VDC, các mạch bảo vệ ngắn mạch. Bộ nguồn một chiều có nhiệm vụ cung cấp năng lượng một chiều cho các mạch và các thiết bị điện tử hoạt động. Yêu cầu đối với loại nguồn này là điện áp ra ít phụ thuộc vào điện áp mạng, của tải và nhiệt độ. Để đạt được yêu cầu đó cần phải dùng các mạch ổn định (ổn áp, ổn dòng) …
Input data | |
Nominal input voltage | 100 V AC … 240 V AC |
Input voltage range | 85 V AC … 264 V AC |
Short-term input voltage | 300 V AC |
Input voltage range | 90 V DC … 350 V DC |
AC frequency range | 45 Hz … 65 Hz |
Frequency range DC | 0 Hz |
Current consumption | 5.1 A (120 V AC) 2.3 A (230 V AC) 4.9 A (110 V DC) 2.4 A (220 V DC) |
Inrush current limitation | < 20 A (typical) |
Power failure bypass | > 32 ms (120 V AC) > 32 ms (230 V AC) |
Typical response time | < 0.6 s |
Protective circuit | Transient surge protection Varistor |
Input fuse, integrated | 12 A (slow-blow, internal) |
Choice of suitable fuses | 10 A … 16 A (AC: Characteristics B, C, D, K) |
Discharge current to PE | < 3.5 mA |
Output data | |
Nominal output voltage | 24 V DC ±1 % |
Setting range of the output voltage | 18 V DC … 29.5 V DC (> 24 V DC, constant capacity restricted) |
Output current | 20 A (-25°C … 60°C, UOUT = 24 V DC) 26 A (with POWER BOOST, -25°C … 40°C permanently, UOUT = 24 V DC) 120 A (SFB technology, 12 ms) 26 A (UIn ≥ 100 V AC) |
Magnetic fuse tripping | B2 / B4 / B6 / B10 / B16 / C2 / C4 / C6 |
Control deviation | < 1 % (change in load, static 10 % … 90 %) < 2 % (change in load, dynamic 10 % … 90 %) < 0.1 % (change in input voltage ±10 %) |
Efficiency | > 93 % (for 230 V AC and nominal values) |
Rise time | < 0.1 s (UOUT (10 % … 90 %)) |
Residual ripple | < 30 mVPP (with nominal values) |
Connection in parallel | Yes, for redundancy and increased capacity |
Connection in series | Yes |
Protection against surge voltage on the output | < 35 V DC |
Resistance to reverse feed | max. 35 V DC |
Dimensions | |
Width | 90 mm |
Height | 130 mm |
Depth | 125 mm |
Width with alternative assembly | 122 mm |
Height with alternative assembly | 130 mm |
Depth with alternative assembly | 93 mm |
Written by admin
Giỏ hàng
Liên hệ:
Phoenix Contact
ADLINK – Máy tính Công nghiệp
KSS (đầu Cos, phụ kiện KSS)
Trả lời